 |
| Autor |
Sõnum |
PeTzZz
Vana Pingviin
Liitunud: 10.09.2005
Postitused: 629
Distributsioon: Fedora 19
|
|
Videokaart on ATI Radeon 9500. Sain ATI fglrx draiverid tööle, kuid kõikjal puudub läbipaistvus, kus vaja. Näiteks akende ülaäärised peaksid olema ümarad teema järgi, kuid näitab kante siiski otsades lisaks; kui ikoone liigutada töölaual või failihalduris, näitab Gnome valget kasti ikooni ümber; akent minimiseerides peaks aken sujuvalt tegumiribale minema, minnes näitab seest läbipaistvate ristkülikute asemel musti kaste; ALT-Tab-i kasutades aknaid vahetades peaks ta näitaba järgemööda vastava akna suuruseid seest läbipaistvaid ristkülikuid, kuid mul ei ole need läbipaistvad, vaid mustad; jne.
Võib-olla oskate midagi soovitada?
xorg.conf:
| Kood: | |
# Xorg configuration created by pyxf86config
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "ee"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "fglrx"
Option "VideoOverlay" "on"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "VideoOverlay" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "ServerFlags"
Option "AIGLX" "off"
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection |
|
|
|
|
|
|
|
  |
obundra
Vana Pingviin
Vanus: 49
Liitunud: 04.08.2005
Postitused: 1213
Asukoht: 127.0.0.1
Distributsioon: RHEL, Solaris, Debian, Gentoo
|
|
Äkki nendest abi
| Kood: | | Section "Extensions"
Option "Composite" "Enable"
EndSection |
või
| Kood: | | Option "AllowGLXWithComposite" "1"
Option "RenderAccel" "1" |
|
|
|
|
_________________
IT teenused
|
|
|
 |
PeTzZz
Vana Pingviin
Liitunud: 10.09.2005
Postitused: 629
Distributsioon: Fedora 19
|
|
Ei aidanud kahjuks ja composite extensioni lubamine tegelikult ei saagi aidata, sest ATI pakutud draiveritel composite extension hetkel ei tööta.
Fedora Core 5 peal töötas ilusti. xorg.conf seal:
| Kood: | |
# XFree86 4 configuration created by pyxf86config
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "ee"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Samsung SyncMaster 765MB/715MB/CD175D(P)"
DisplaySize 320 240
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 30.0 - 85.0
VertRefresh 50.0 - 160.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "fglrx"
VendorName "Videocard vendor"
BoardName "ATI Technologies Inc R300 AD [Radeon 9500 Pro]"
Option "VideoOverlay" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
|
Selle DRI sektsiooni lisamine ei andnud midagi juurde, kui proovisin. Muu on nagu laaditavate moodulite erinevus. Aga täpselt ei tea, kas ka midagi vajalikku...
|
|
|
|
|
|
|
|
PeTzZz
Vana Pingviin
Liitunud: 10.09.2005
Postitused: 629
Distributsioon: Fedora 19
|
|
Sain nüüd asja korda, kui lisasin xorg.conf-i kõik moodulid, mis FC5-s veel lisaks olid. Ma küll ei tea, mis mille jaoks on ja mis asja ära tegi, aga võib-olla hiljem uurin...
S.t. lisasin moodulid:
| Kood: | | Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "record"
Load "freetype"
Load "type1" |
|
|
|
|
|
|
|
|
|
|
|
|
Powered by phpBB2 Plus based on phpBB © 2001/7 phpBB Group
|
|
