Portaal Portaal Pingviini veeb foorumi pealeht
  Viki  |  IRC  |  Otsing  |  Küsimused ja vastused  |  Profiil  |  Privaatsõnumite vaatamiseks logi sisse  | Logi sisse või Registreeru
<empty>
Vaata järgmist teemat
Vaata eelmist teemat

Postita uus teemaVasta teemale
Autor Sõnum
-IFFI-
Vana Pingviin
Vana Pingviin


Vanus: 47
Liitunud: 25.06.2005
Postitused: 1411
Asukoht: Lappeenranta-Turku
Distributsioon: Linux MX
finland.gif
postituspostitatud: 15.06.2009, 21:21  postituse pealkiri:  Kuidas mountida nokia mobiili?  

Kohe mitte ei loe ubuntu teda kui mälupulgana või millena iganes. Mandrivas toimib asi koheselt nii pea kui asi ühendatud. Ubuntus ei taha teps kohe mitte asi toimida. Pistan järgi tavalise mälupulga siis see kohe tuntakse ära ubuntus.

Proovisin mountida kui ntfs pulka /home katalooma kuid tulutult. Kindlasti ei teinud ma ka kõike õieti.

On kellegil miskeid kavalusi varuks.
Mobla siis Nokia N95 8GB
ja distroks LastOS ubuntu suguvõsast numbriga 9.04.

Tänud vihjete ja nõuannete eest.


DaStoned
Pingviini aktivist
Pingviini aktivist


Vanus: 42
Liitunud: 11.01.2007
Postitused: 388
Asukoht: Tallinn
Distributsioon: Debian
estonia.gif
postituspostitatud: 15.06.2009, 21:23  postituse pealkiri:  (teema puudub)  

Mida ütleb dmesg peale kaabli ühendamist?

_________________
When the shit hits the fan, keep your mouth shut!

-IFFI-
Vana Pingviin
Vana Pingviin


Vanus: 47
Liitunud: 25.06.2005
Postitused: 1411
Asukoht: Lappeenranta-Turku
Distributsioon: Linux MX
finland.gif
postituspostitatud: 15.06.2009, 21:53  postituse pealkiri:  (teema puudub)  

Embarassed mina selle väljundiga küll ei oska miskit peale hakkata

Kood:
[    1.101192] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[    1.101356] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[    1.101521] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[    1.101665] ACPI: Power Resource [FN00] (on)
[    1.101826] ACPI: WMI: Mapper loaded
[    1.101877] SCSI subsystem initialized
[    1.101877] libata version 3.00 loaded.
[    1.101877] usbcore: registered new interface driver usbfs
[    1.101877] usbcore: registered new interface driver hub
[    1.101877] usbcore: registered new device driver usb
[    1.101877] PCI: Using ACPI for IRQ routing
[    1.108011] Bluetooth: Core ver 2.13
[    1.108026] NET: Registered protocol family 31
[    1.108026] Bluetooth: HCI device and connection manager initialized
[    1.108026] Bluetooth: HCI socket layer initialized
[    1.108026] NET: Registered protocol family 8
[    1.108026] NET: Registered protocol family 20
[    1.108035] NetLabel: Initializing
[    1.108037] NetLabel:  domain hash size = 128
[    1.108039] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.108052] NetLabel:  unlabeled traffic allowed by default
[    1.108068] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    1.108074] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    1.112070] AppArmor: AppArmor Filesystem Enabled
[    1.116010] Switched to high resolution mode on CPU 0
[    1.116462] Switched to high resolution mode on CPU 1
[    1.120010] pnp: PnP ACPI init
[    1.120021] ACPI: bus type pnp registered
[    1.121771] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.4 BAR 7 (0x1000-0x1fff), disabling
[    1.122599] pnp: PnP ACPI: found 8 devices
[    1.122601] ACPI: ACPI bus type pnp unregistered
[    1.122604] PnPBIOS: Disabled by ACPI PNP
[    1.122614] system 00:01: ioport range 0x800-0x80f has been reserved
[    1.122617] system 00:01: ioport range 0x810-0x817 has been reserved
[    1.122619] system 00:01: ioport range 0x820-0x823 has been reserved
[    1.122622] system 00:01: ioport range 0x400-0x47f has been reserved
[    1.122624] system 00:01: ioport range 0x500-0x57f has been reserved
[    1.122627] system 00:01: ioport range 0x580-0x5ff has been reserved
[    1.122629] system 00:01: ioport range 0x600-0x627 has been reserved
[    1.122633] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
[    1.122636] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    1.122639] system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
[    1.122642] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[    1.122644] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[    1.122647] system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
[    1.122650] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[    1.122653] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[    1.122656] system 00:01: iomem range 0xff800000-0xffffffff could not be reserved
[    1.157361] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    1.157365] pci 0000:00:1c.0:   IO window: 0x2000-0x3fff
[    1.157372] pci 0000:00:1c.0:   MEM window: 0x93600000-0x945fffff
[    1.157377] pci 0000:00:1c.0:   PREFETCH window: 0x00000090400000-0x000000914fffff
[    1.157386] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
[    1.157390] pci 0000:00:1c.4:   IO window: 0x1000-0x1fff
[    1.157396] pci 0000:00:1c.4:   MEM window: 0x92600000-0x935fffff
[    1.157401] pci 0000:00:1c.4:   PREFETCH window: 0x00000091500000-0x000000924fffff
[    1.157410] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[    1.157411] pci 0000:00:1e.0:   IO window: disabled
[    1.157418] pci 0000:00:1e.0:   MEM window: disabled
[    1.157423] pci 0000:00:1e.0:   PREFETCH window: disabled
[    1.157440] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.157446] pci 0000:00:1c.0: setting latency timer to 64
[    1.157455] pci 0000:00:1c.4: enabling device (0000 -> 0003)
[    1.157459] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.157466] pci 0000:00:1c.4: setting latency timer to 64
[    1.157475] pci 0000:00:1e.0: setting latency timer to 64
[    1.157479] bus: 00 index 0 io port: [0x00-0xffff]
[    1.157481] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    1.157484] bus: 02 index 0 io port: [0x2000-0x3fff]
[    1.157486] bus: 02 index 1 mmio: [0x93600000-0x945fffff]
[    1.157488] bus: 02 index 2 mmio: [0x90400000-0x914fffff]
[    1.157490] bus: 02 index 3 mmio: [0x0-0x0]
[    1.157492] bus: 06 index 0 io port: [0x1000-0x1fff]
[    1.157494] bus: 06 index 1 mmio: [0x92600000-0x935fffff]
[    1.157496] bus: 06 index 2 mmio: [0x91500000-0x924fffff]
[    1.157498] bus: 06 index 3 mmio: [0x0-0x0]
[    1.157500] bus: 03 index 0 mmio: [0x0-0x0]
[    1.157502] bus: 03 index 1 mmio: [0x0-0x0]
[    1.157504] bus: 03 index 2 mmio: [0x0-0x0]
[    1.157505] bus: 03 index 3 io port: [0x00-0xffff]
[    1.157507] bus: 03 index 4 mmio: [0x000000-0xffffffff]
[    1.157517] NET: Registered protocol family 2
[    1.172057] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.172315] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.172824] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.173162] TCP: Hash tables configured (established 131072 bind 65536)
[    1.173165] TCP reno registered
[    1.180129] NET: Registered protocol family 1
[    1.180263] checking if image is initramfs... it is
[    1.787519] Freeing initrd memory: 7477k freed
[    1.787563] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    1.787565] Simple Boot Flag at 0x44 set to 0x1
[    1.787765] cpufreq: No nForce2 chipset.
[    1.787911] audit: initializing netlink socket (disabled)
[    1.787936] type=2000 audit(1245002897.784:1): initialized
[    1.794994] highmem bounce pool size: 64 pages
[    1.794999] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.796290] VFS: Disk quotas dquot_6.5.1
[    1.796349] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.796940] fuse init (API version 7.10)
[    1.797024] msgmni has been set to 1701
[    1.797200] alg: No test for stdrng (krng)
[    1.797211] io scheduler noop registered
[    1.797213] io scheduler anticipatory registered
[    1.797215] io scheduler deadline registered
[    1.797230] io scheduler cfq registered (default)
[    1.797242] pci 0000:00:02.0: Boot video device
[    9.796007] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[   17.796007] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[   17.799291] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[   17.799345] pcieport-driver 0000:00:1c.0: found MSI capability
[   17.799384] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
[   17.799401] pci_express 0000:00:1c.0:pcie00: allocate port service
[   17.799416] pci_express 0000:00:1c.0:pcie02: allocate port service
[   17.799428] pci_express 0000:00:1c.0:pcie03: allocate port service
[   17.799505] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[   17.799558] pcieport-driver 0000:00:1c.4: found MSI capability
[   17.799594] pcieport-driver 0000:00:1c.4: irq 2302 for MSI/MSI-X
[   17.799610] pci_express 0000:00:1c.4:pcie00: allocate port service
[   17.799622] pci_express 0000:00:1c.4:pcie02: allocate port service
[   17.799633] pci_express 0000:00:1c.4:pcie03: allocate port service
[   17.799718] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   17.799804] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[   17.799958] ACPI: AC Adapter [ADP0] (on-line)
[   17.801076] ACPI: Battery Slot [BAT0] (battery present)
[   17.801155] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   17.801158] ACPI: Power Button (FF) [PWRF]
[   17.801201] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[   17.801203] ACPI: Power Button (CM) [PWRB]
[   17.801242] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[   17.803504] ACPI: Lid Switch [LID0]
[   17.803745] fan PNP0C0B:00: registered as cooling_device0
[   17.803751] ACPI: Fan [FAN] (on)
[   17.804473] ACPI: SSDT 77B77C18, 026B (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
[   17.805031] ACPI: SSDT 77B75598, 0537 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
[   17.805648] Monitor-Mwait will be used to enter C-1 state
[   17.805651] Monitor-Mwait will be used to enter C-2 state
[   17.805667] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   17.805685] processor ACPI_CPU:00: registered as cooling_device1
[   17.805689] ACPI: Processor [CPU0] (supports 8 throttling states)
[   17.806190] ACPI: SSDT 77B76E18, 01CF (r1  PmRef    ApIst     3000 INTL 20051117)
[   17.806755] ACPI: SSDT 77B77F18, 008D (r1  PmRef    ApCst     3000 INTL 20051117)
[   17.807461] ACPI: CPU1 (power states: C1[C1] C2[C2])
[   17.807478] processor ACPI_CPU:01: registered as cooling_device2
[   17.807482] ACPI: Processor [CPU1] (supports 8 throttling states)
[   17.810488] thermal LNXTHERM:01: registered as thermal_zone0
[   17.810766] ACPI: Transitioning device [FAN] to D3
[   17.810900] ACPI: Thermal Zone [THRM] (0 C)
[   17.810949] isapnp: Scanning for PnP cards...
[   18.164834] isapnp: No Plug & Play device found
[   18.172759] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[   18.173728] brd: module loaded
[   18.174024] loop: module loaded
[   18.174088] Fixed MDIO Bus: probed
[   18.174093] PPP generic driver version 2.4.2
[   18.174150] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[   18.174182] Driver 'sd' needs updating - please use bus_type methods
[   18.174191] Driver 'sr' needs updating - please use bus_type methods
[   18.174229] ahci 0000:00:1f.2: version 3.0
[   18.174247] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   18.174296] ahci 0000:00:1f.2: irq 2301 for MSI/MSI-X
[   18.174393] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[   18.174396] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ems
[   18.174402] ahci 0000:00:1f.2: setting latency timer to 64
[   18.174743] scsi0 : ahci
[   18.174856] scsi1 : ahci
[   18.174913] scsi2 : ahci
[   18.174965] scsi3 : ahci
[   18.175019] scsi4 : ahci
[   18.175073] scsi5 : ahci
[   18.175186] ata1: SATA max UDMA/133 abar m2048@0x94605000 port 0x94605100 irq 2301
[   18.175190] ata2: SATA max UDMA/133 abar m2048@0x94605000 port 0x94605180 irq 2301
[   18.175192] ata3: DUMMY
[   18.175194] ata4: DUMMY
[   18.175196] ata5: SATA max UDMA/133 abar m2048@0x94605000 port 0x94605300 irq 2301
[   18.175200] ata6: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 2301
[   18.656017] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   18.656474] ata1.00: ATA-8: FUJITSU MHZ2250BH G1, 00400209, max UDMA/100
[   18.656477] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   18.657057] ata1.00: configured for UDMA/100
[   18.992018] ata2: SATA link down (SStatus 0 SControl 300)
[   19.328018] ata5: SATA link down (SStatus 0 SControl 300)
[   20.232018] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   20.245664] ata6.00: ATAPI: TSSTcorp CDDVDW TS-L633A, TO01, max UDMA/100, ATAPI AN
[   20.288299] ata6.00: configured for UDMA/100
[   20.396124] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHZ2250B 0040 PQ: 0 ANSI: 5
[   20.396215] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[   20.396231] sd 0:0:0:0: [sda] Write Protect is off
[   20.396233] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   20.396258] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   20.396328] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[   20.396342] sd 0:0:0:0: [sda] Write Protect is off
[   20.396344] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   20.396368] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   20.396371]  sda: sda1 < sda5 sda6 sda7 > sda3
[   20.814384] sd 0:0:0:0: [sda] Attached SCSI disk
[   20.814433] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   21.104472] scsi 5:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633A  TO01 PQ: 0 ANSI: 5
[   21.227547] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   21.227550] Uniform CD-ROM driver Revision: 3.20
[   21.227652] sr 5:0:0:0: Attached scsi CD-ROM sr0
[   21.227689] sr 5:0:0:0: Attached scsi generic sg1 type 5
[   21.228357] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   21.228381] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[   21.228402] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[   21.228405] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   21.228460] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[   21.232366] ehci_hcd 0000:00:1a.7: debug port 1
[   21.232373] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[   21.232389] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94605c00
[   21.248009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[   21.248072] usb usb1: configuration #1 chosen from 1 choice
[   21.248097] hub 1-0:1.0: USB hub found
[   21.248104] hub 1-0:1.0: 4 ports detected
[   21.248206] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   21.248219] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[   21.248223] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   21.248262] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[   21.252171] ehci_hcd 0000:00:1d.7: debug port 1
[   21.252178] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[   21.252191] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x94605800
[   21.268008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[   21.268077] usb usb2: configuration #1 chosen from 1 choice
[   21.268100] hub 2-0:1.0: USB hub found
[   21.268108] hub 2-0:1.0: 8 ports detected
[   21.268205] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   21.268221] uhci_hcd: USB Universal Host Controller Interface driver
[   21.268252] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   21.268260] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[   21.268263] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   21.268302] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[   21.268339] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040e0
[   21.268415] usb usb3: configuration #1 chosen from 1 choice
[   21.268438] hub 3-0:1.0: USB hub found
[   21.268445] hub 3-0:1.0: 2 ports detected
[   21.268527] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[   21.268534] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[   21.268537] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   21.268576] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[   21.268611] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
[   21.268682] usb usb4: configuration #1 chosen from 1 choice
[   21.268705] hub 4-0:1.0: USB hub found
[   21.268713] hub 4-0:1.0: 2 ports detected
[   21.268794] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   21.268801] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[   21.268804] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   21.268848] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[   21.268875] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0
[   21.268947] usb usb5: configuration #1 chosen from 1 choice
[   21.268970] hub 5-0:1.0: USB hub found
[   21.268980] hub 5-0:1.0: 2 ports detected
[   21.269062] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   21.269068] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[   21.269072] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   21.269110] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[   21.269136] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
[   21.269208] usb usb6: configuration #1 chosen from 1 choice
[   21.269231] hub 6-0:1.0: USB hub found
[   21.269239] hub 6-0:1.0: 2 ports detected
[   21.269329] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[   21.269335] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[   21.269339] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   21.269378] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[   21.269406] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00004060
[   21.269476] usb usb7: configuration #1 chosen from 1 choice
[   21.269499] hub 7-0:1.0: USB hub found
[   21.269505] hub 7-0:1.0: 2 ports detected
[   21.269583] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   21.269589] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[   21.269593] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   21.269633] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[   21.269669] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004040
[   21.269737] usb usb8: configuration #1 chosen from 1 choice
[   21.269760] hub 8-0:1.0: USB hub found
[   21.269767] hub 8-0:1.0: 2 ports detected
[   21.269897] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[   21.298494] serio: i8042 KBD port at 0x60,0x64 irq 1
[   21.298499] serio: i8042 AUX port at 0x60,0x64 irq 12
[   21.300538] mice: PS/2 mouse device common for all mice
[   21.316564] rtc_cmos 00:03: RTC can wake from S4
[   21.316599] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[   21.316632] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[   21.316694] device-mapper: uevent: version 1.0.3
[   21.316788] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[   21.316857] device-mapper: multipath: version 1.0.5 loaded
[   21.316859] device-mapper: multipath round-robin: version 1.0.0 loaded
[   21.316933] EISA: Probing bus 0 at eisa.0
[   21.316940] Cannot allocate resource for EISA slot 1
[   21.316942] Cannot allocate resource for EISA slot 2
[   21.316944] Cannot allocate resource for EISA slot 3
[   21.316947] Cannot allocate resource for EISA slot 4
[   21.316966] EISA: Detected 0 cards.
[   21.317061] cpuidle: using governor ladder
[   21.317148] cpuidle: using governor menu
[   21.317654] TCP cubic registered
[   21.317749] NET: Registered protocol family 10
[   21.318182] lo: Disabled Privacy Extensions
[   21.318511] NET: Registered protocol family 17
[   21.318530] Bluetooth: L2CAP ver 2.11
[   21.318532] Bluetooth: L2CAP socket layer initialized
[   21.318535] Bluetooth: SCO (Voice Link) ver 0.6
[   21.318536] Bluetooth: SCO socket layer initialized
[   21.318569] Bluetooth: RFCOMM socket layer initialized
[   21.318575] Bluetooth: RFCOMM TTY layer initialized
[   21.318577] Bluetooth: RFCOMM ver 1.10
[   21.319182] Using IPI No-Shortcut mode
[   21.319261] registered taskstats version 1
[   21.319384]   Magic number: 13:26:140
[   21.319404] block ram5: hash matches
[   21.319425] acpi device:11: hash matches
[   21.319473] Marking TSC unstable due to TSC halts in idle
[   21.319481] rtc_cmos 00:03: setting system clock to 2009-06-14 18:08:38 UTC (1245002918)
[   21.319484] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   21.319486] EDD information not available.
[   21.319771] Freeing unused kernel memory: 532k freed
[   21.319910] Write protecting the kernel text: 4112k
[   21.319962] Write protecting the kernel read-only data: 1524k
[   21.358419] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[   21.384134] compcache: Compressed swap size set to: 482192 KB
[   21.384630] TLSF: pool: f7d74000, init_size=16384, max_size=0, grow_size=16384
[   21.523551] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   21.523572] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   21.523627] r8169 0000:02:00.0: setting latency timer to 64
[   21.523911] r8169 0000:02:00.0: irq 2300 for MSI/MSI-X
[   21.524640] eth0: RTL8102e at 0xf7df6000, 00:1e:33:67:cc:96, XID 34a00000 IRQ 2300
[   21.560703] usb 1-2: new high speed USB device using ehci_hcd and address 2
[   21.655907] Adding 482188k swap on /dev/ramzswap0.  Priority:100 extents:1 across:482188k
[   21.731653] usb 1-2: configuration #1 chosen from 1 choice
[   21.844086] usb 2-1: new high speed USB device using ehci_hcd and address 2
[   21.911341] PM: Starting manual resume from disk
[   21.911345] PM: Resume from partition 8:5
[   21.911347] PM: Checking hibernation image.
[   21.911533] PM: Resume from disk failed.
[   21.944108] kjournald starting.  Commit interval 5 seconds
[   21.944117] EXT3-fs: mounted filesystem with ordered data mode.
[   21.987443] usb 2-1: configuration #1 chosen from 1 choice
[   22.000056] Clocksource tsc unstable (delta = -76749156 ns)
[   22.100079] usb 2-6: new high speed USB device using ehci_hcd and address 3
[   22.247303] usb 2-6: configuration #1 chosen from 1 choice
[   23.995845] udev: starting version 141
[   24.460117] cfg80211: Calling CRDA to update world regulatory domain
[   24.542673] Initializing USB Mass Storage driver...
[   24.543846] usb-storage: probe of 2-1:1.0 failed with error -5
[   24.543914] usb-storage: probe of 2-1:1.1 failed with error -5
[   24.544558] usb-storage: probe of 2-1:1.2 failed with error -1
[   24.545383] usb-storage: probe of 2-1:1.3 failed with error -1
[   24.545411] usbcore: registered new interface driver usb-storage
[   24.545448] USB Mass Storage support registered.
[   24.587980] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   24.678068] iTCO_vendor_support: vendor-support=0
[   24.876088] Linux agpgart interface v0.103
[   24.919255] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[   24.919843] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
[   24.922192] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[   24.997183] usbcore: registered new interface driver usbserial
[   24.997323] USB Serial support registered for generic
[   24.997419] usbcore: registered new interface driver usbserial_generic
[   24.997422] usbserial: USB Serial Driver core
[   25.237365] acpi device:04: registered as cooling_device3
[   25.237896] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
[   25.244168] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[   25.378393] Linux video capture interface: v2.00
[   25.434569] USB Serial support registered for GSM modem (1-port)
[   25.434643] option 2-1:1.0: GSM modem (1-port) converter detected
[   25.434806] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
[   25.434818] option 2-1:1.1: GSM modem (1-port) converter detected
[   25.434908] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
[   25.434932] usbcore: registered new interface driver option
[   25.434935] option: v0.7.2:USB Driver for GSM modems
[   25.454937] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   25.463420] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[   25.463531] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[   25.463645] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   25.570814] cfg80211: World regulatory domain updated:
[   25.570819]    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   25.570822]    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.570824]    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.570826]    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.570828]    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.570831]    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.762827] uvcvideo: Found UVC 1.00 device CNF7051 (04f2:b070)
[   25.764371] input: CNF7051 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7
[   25.768144] usbcore: registered new interface driver uvcvideo
[   25.768168] USB Video Class driver (v0.1.0)
[   26.047219] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   26.047338] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   26.078167] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[   26.102636] rtl8187: 8187B chip detected. Support is EXPERIMENTAL, and could damage your
[   26.102638]          hardware, use at your own risk
[   26.103561] phy0: Selected rate control algorithm 'pid'
[   26.142909] phy0: hwaddr 00:21:63:6b:c5:3c, RTL8187BvE V0 + rtl8225z2
[   26.142937] usbcore: registered new interface driver rtl8187
[   26.504193] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04711/0xa04000
[   26.504199] synaptics: Toshiba Satellite L350 detected, limiting rate to 40pps.
[   26.581133] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   26.807391] lp: driver loaded but no devices found
[   27.207945] Adding 1951824k swap on /dev/sda5.  Priority:-1 extents:1 across:1951824k
[   27.536457] EXT3 FS on sda6, internal journal
[   28.464700] kjournald starting.  Commit interval 5 seconds
[   28.465037] EXT3 FS on sda7, internal journal
[   28.465041] EXT3-fs: mounted filesystem with ordered data mode.
[   29.051185] type=1505 audit(1245002926.228:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2045
[   29.051314] type=1505 audit(1245002926.228:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2045
[   29.051358] type=1505 audit(1245002926.228:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2045
[   29.051395] type=1505 audit(1245002926.228:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2045
[   29.093705] type=1505 audit(1245002926.272:6): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=2050
[   29.231273] type=1505 audit(1245002926.409:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2054
[   29.231465] type=1505 audit(1245002926.409:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2054
[   29.274106] type=1505 audit(1245002926.452:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2058
[   29.545367] ip_tables: (C) 2000-2006 Netfilter Core Team
[   29.571438] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   29.571621] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   29.571623] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[   29.571625] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   29.618045] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   38.311783] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   38.311787] vboxdrv: Successfully done.
[   38.311789] vboxdrv: Found 2 processor cores.
[   38.311880] vboxdrv: fAsync=0 offMin=0x1b0 offMax=0x84c
[   38.311925] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   38.311927] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009).
[   40.522815] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   40.522818] Bluetooth: BNEP filters: protocol multicast
[   40.541944] Bridge firewalling registered
[   42.962579] ppdev: user-space parallel port driver
[   44.888886] [drm] Initialized drm 1.1.0 20060810
[   44.894074] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   44.894080] pci 0000:00:02.0: setting latency timer to 64
[   44.894345] pci 0000:00:02.0: irq 2299 for MSI/MSI-X
[   44.894438] [drm] Initialized i915 1.6.0 20080730 on minor 0
[   44.896647] [drm:i915_setparam] *ERROR* unknown parameter 4
[   46.822300] r8169: eth0: link down
[   46.822504] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   62.793427] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  250.743685] CPU0 attaching NULL sched-domain.
[  250.743691] CPU1 attaching NULL sched-domain.
[  250.743783] CPU0 attaching sched-domain:
[  250.743786]  domain 0: span 0-1 level MC
[  250.743789]   groups: 0 1
[  250.743794] CPU1 attaching sched-domain:
[  250.743796]  domain 0: span 0-1 level MC
[  250.743798]   groups: 1 0
[  250.805792] CPU0 attaching NULL sched-domain.
[  250.805804] CPU1 attaching NULL sched-domain.
[  250.816161] CPU0 attaching sched-domain:
[  250.816167]  domain 0: span 0-1 level MC
[  250.816172]   groups: 0 1
[  250.816185] CPU1 attaching sched-domain:
[  250.816188]  domain 0: span 0-1 level MC
[  250.816193]   groups: 1 0
[  252.329871] PPP BSD Compression module registered
[  252.448142] PPP Deflate Compression module registered
[ 1931.539262] sr0: CDROM not ready.  Make sure there is a disc in the drive.
[ 2176.427023] sr0: CDROM not ready.  Make sure there is a disc in the drive.
[ 2960.156549] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 2960.331776] usb 5-2: configuration #1 chosen from 1 choice
[ 2960.435194] cdc_acm 5-2:1.10: ttyACM0: USB ACM device
[ 2960.437792] usbcore: registered new interface driver cdc_acm
[ 2960.437800] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2960.504800] usbcore: registered new interface driver cdc_ether
[ 2960.506964] usb 5-2: bad CDC descriptors
[ 2960.506987] usbcore: registered new interface driver rndis_host
[ 2960.522480] usb 5-2: bad CDC descriptors
[ 2960.522510] usbcore: registered new interface driver rndis_wlan
[ 4086.216132] usb 5-2: USB disconnect, address 2
[ 4126.024061] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 4126.198244] usb 5-2: configuration #1 chosen from 1 choice
[ 4126.232329] cdc_acm 5-2:1.10: ttyACM0: USB ACM device
[ 4126.241381] usb 5-2: bad CDC descriptors
[ 4126.241399] usb 5-2: bad CDC descriptors
[ 6242.080086] usb 5-2: USB disconnect, address 3
[ 8693.241771] UDF-fs: No VRS found
[ 8693.299265] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 8693.560083] ISOFS: changing to secondary root
[88057.284547] usb 6-1: new full speed USB device using uhci_hcd and address 2
[88057.456384] usb 6-1: configuration #1 chosen from 1 choice
[88057.468360] cdc_acm 6-1:1.10: ttyACM0: USB ACM device
[88057.474398] usb 6-1: bad CDC descriptors
[88057.474418] usb 6-1: bad CDC descriptors
[88111.592099] usb 6-1: USB disconnect, address 2
[88117.032046] usb 5-2: new full speed USB device using uhci_hcd and address 4
[88117.265628] usb 5-2: configuration #1 chosen from 1 choice
[88117.276327] cdc_acm 5-2:1.10: ttyACM0: USB ACM device
[88117.283385] usb 5-2: bad CDC descriptors
[88117.283405] usb 5-2: bad CDC descriptors
[88165.836558] usb 2-3: new high speed USB device using ehci_hcd and address 8
[88165.972285] usb 2-3: configuration #1 chosen from 1 choice
[88165.974578] scsi10 : SCSI emulation for USB Mass Storage devices
[88165.974858] usb-storage: device found at 8
[88165.974862] usb-storage: waiting for device to settle before scanning
[88170.972399] usb-storage: device scan complete
[88170.973193] scsi 10:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[88170.977531] sd 10:0:0:0: [sdb] 31506432 512-byte hardware sectors: (16.1 GB/15.0 GiB)
[88170.978275] sd 10:0:0:0: [sdb] Write Protect is off
[88170.978282] sd 10:0:0:0: [sdb] Mode Sense: 23 00 00 00
[88170.978286] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[88171.001051] sd 10:0:0:0: [sdb] 31506432 512-byte hardware sectors: (16.1 GB/15.0 GiB)
[88171.001812] sd 10:0:0:0: [sdb] Write Protect is off
[88171.001818] sd 10:0:0:0: [sdb] Mode Sense: 23 00 00 00
[88171.001824] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[88171.001835]  sdb: sdb1
[88171.218459] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[88171.221025] sd 10:0:0:0: Attached scsi generic sg2 type 0
[88395.229385] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[90859.680136] usb 5-2: USB disconnect, address 4
[92167.419678] usb 2-3: USB disconnect, address 8
[92212.296086] usb 6-1: new full speed USB device using uhci_hcd and address 3
[92212.476051] usb 6-1: configuration #1 chosen from 1 choice
[92212.490298] cdc_acm 6-1:1.10: ttyACM0: USB ACM device
[92212.497380] usb 6-1: bad CDC descriptors
[92212.497399] usb 6-1: bad CDC descriptors


laurivosandi
Moderaator
Moderaator


Vanus: 35
Liitunud: 08.07.2005
Postitused: 647
Asukoht: Tallinn
Distributsioon: Estobuntu, Debian
estonia.gif
postituspostitatud: 18.06.2009, 11:53  postituse pealkiri:  (teema puudub)  

Ta praegu töötab sul USB modemi režiimis.

Mu E51 pakub külge ühendamisel USB režiimi valikut:
Nokia PC Suite vms - Modemi režiim
USB mass storage režiim vms - USB mälupulga režiim

Viimase valides tekib vastav seade /dev alla ja süsteem monteerib ise


ilmar
Pingviini kasutaja
Pingviini kasutaja


Vanus: 59
Liitunud: 21.07.2006
Postitused: 41
Asukoht: Tallinn
Distributsioon: Ubuntu 10.10
estonia.gif
postituspostitatud: 18.06.2009, 14:03  postituse pealkiri:  (teema puudub)  

Tänanud teema algatajale ning v6sa'le, olin sama probleemi ees. Nüüd sain oma E51 kaabliga tööle, aga kas on võimalik sama teha ka üle sinihamba, kui jah, siis kuidas?

_________________
Ilmar

https://www.dropbox.com/referrals/NTM2MDA2MTI5

DaStoned
Pingviini aktivist
Pingviini aktivist


Vanus: 42
Liitunud: 11.01.2007
Postitused: 388
Asukoht: Tallinn
Distributsioon: Debian
estonia.gif
postituspostitatud: 18.06.2009, 14:16  postituse pealkiri:  (teema puudub)  

Sinihamba jaoks paigalda pakid bluetooth, bluez-gnome ja bluez-utils.

Siis paned mõne lihtsa GUI programmikese käima, millega saab point-n-click abiga telefoni üles otsida, ära paaritada ja faile brausida.

Sellest ehk piisab?

_________________
When the shit hits the fan, keep your mouth shut!

ilmar
Pingviini kasutaja
Pingviini kasutaja


Vanus: 59
Liitunud: 21.07.2006
Postitused: 41
Asukoht: Tallinn
Distributsioon: Ubuntu 10.10
estonia.gif
postituspostitatud: 18.06.2009, 14:23  postituse pealkiri:  (teema puudub)  

Vabandust, väljendasin end pisut ebaselget, failidele pääsen tõesti ka üle sinihamba juurde, aga pidasin silmas silmas modemina kasutamist.

_________________
Ilmar

https://www.dropbox.com/referrals/NTM2MDA2MTI5

DaStoned
Pingviini aktivist
Pingviini aktivist


Vanus: 42
Liitunud: 11.01.2007
Postitused: 388
Asukoht: Tallinn
Distributsioon: Debian
estonia.gif
postituspostitatud: 18.06.2009, 14:41  postituse pealkiri:  (teema puudub)  

See on tiba keerulisem, aga mitte võimatu. Kelle võrgus sa üldse oled ja kas lepingu või kõnekaardiga? Mis telefon?

Kõige tähtsam on kontrollida, et su mobiil on seadistatud internetti kasutama - kas sa oled netiseaded tellinud ja telefoniga saad edukalt surfata? Kui sul eraldi data-lepingut ei ole, palu operaatoril GPRS/3G sisse lülitada (võid helistada või iseteeninduse kaudu sättida) ja telli päevapilet (muidu võib katsetamine ja mängimine kole kalliks minna).

Edasi otsi oma operaatori veebist üles nende GPRS seaded (APN, kasutajanimi ja parool). Uuri välja, mis su telefoni GPRS dial-up number on.

Üks parimaid juhendeid GPRS/3G neti kasutamiseks on siin:
https://help.ubuntu.com/community/BluetoothDialup

Lühidalt:

1. Paigalda soft:
Kood:
sudo apt-get install bluez-utils bluez-pin ppp


2. Paarita telefon ja arvuti (aga seda sa oled juba teinud, kui faile suudad brausida)

3. Vaata mis su telefoni MAC aadress on:
Kood:
hcitool scan


4. Vaata mis kanali peal töötab dial-up networking ehk DUN
Kood:
sdptool search DUN


5. Tekita failis "/etc/bluetooth/rfcomm.conf" uus /dev/rfcomm0 seade kus on kirjas sinu telefoni MAC ja kanal:
Kood:
rfcomm0 {
        bind yes;
        device 00:11:22:33:44:55;
        channel 2;
        comment "Minu mobla";
}


6. Bluetoothile restart:
Kood:
sudo /etc/init.d/bluetooth restart


7. Nüüd tuleb veidi keerulisem osa - dial-up konffimine. Siin on vaja teada oma teenusepakkuja APN-i (EMT/Elisa puhul "internet", Tele2 puhul "internet.tele2.ee") ja telefoni GPRS numbrit (ja data profiili numbrit, mis on vaikimisi 1).

Lisa enda kasutaja dialout gruppi, kui sa seal veel ei ole (käsk groups ütleb seda).

Võid proovida graafilisi PPP kliente: näiteks Gnome PPP või KPPP. Mina seadistasin vana hea ppp ära. Mul on Sony Ericsson ja Tele2 leping.

Mul on kom konfifaili: "/etc/ppp/peers/sony", "/etc/ppp/peers/sony.chat" ja "/etc/ppp/chap-secrets".

Esimese sisu on selline:
Kood:
connect '/usr/sbin/chat -v -f /etc/ppp/peers/sony.chat'
/dev/rfcomm1 460800
usepeerdns
debug
defaultroute
noipdefault
crtscts
noccp
user "wap"


Pane tähele, et teise faili nimi on kohe esimesel real toodud. Bluetooth kiirus on 460800 bit/s (võid proovida 2 korda kiiremat, aga mitte enam) ja kasutajanimi on "wap". Mul on ka debug sisse lülitatud, vea korral otsi juttu failist /var/log/syslog

Teise sisu on selline:
Kood:
ABORT BUSY
ABORT 'NO CARRIER'
ABORT VOICE
ABORT 'NO DIALTONE'
ABORT 'NO DIAL TONE'
ABORT 'NO ANSWER'
ABORT DELAYED

'' ATZ OK
AT+CGDCONT=1,"IP","internet.tele2.ee"

OK "ATD*98*1#"

CONNECT \d\c


Pane tähele, et APN on "internet.tele2.ee" ja dial-up number on "*98*1#" (valib esimese andmesideprofiili ja kehtib ainult Sony-Ericsson telefonidel).

Kolmandas on lihtsalt parool ja kasutajanimi:

Kood:
# Secrets for authentication using CHAP
# client        server  secret                  IP addresses
"wap"           *       "wap"


Dial-up läheb käima käsuga
Kood:
pon sony

ja jääb seisma käsuga
Kood:
poff

_________________
When the shit hits the fan, keep your mouth shut!



Viimati muutis DaStoned 18.06.2009, 15:38; muudetud 2 korda
ilmar
Pingviini kasutaja
Pingviini kasutaja


Vanus: 59
Liitunud: 21.07.2006
Postitused: 41
Asukoht: Tallinn
Distributsioon: Ubuntu 10.10
estonia.gif
postituspostitatud: 18.06.2009, 14:47  postituse pealkiri:  (teema puudub)  

Tsitaat:
See on tiba keerulisem, aga mitte võimatu. Kelle võrgus sa üldse oled ja kas lepingu või kõnekaardiga? Mis telefon?

Lepinguline EMT ja Nokia E51 ja E60

_________________
Ilmar

https://www.dropbox.com/referrals/NTM2MDA2MTI5

DaStoned
Pingviini aktivist
Pingviini aktivist


Vanus: 42
Liitunud: 11.01.2007
Postitused: 388
Asukoht: Tallinn
Distributsioon: Debian
estonia.gif
postituspostitatud: 18.06.2009, 15:09  postituse pealkiri:  (teema puudub)  

Okei, ma vahepeal veidi kirjutasin juurde eelmisesse postitusse.

Sinul on dial-up numbriks *99# ja APN-iks "internet.emt.ee". Parooli ja kasutajanime pole vaja.

_________________
When the shit hits the fan, keep your mouth shut!

ilmar
Pingviini kasutaja
Pingviini kasutaja


Vanus: 59
Liitunud: 21.07.2006
Postitused: 41
Asukoht: Tallinn
Distributsioon: Ubuntu 10.10
estonia.gif
postituspostitatud: 18.06.2009, 18:18  postituse pealkiri:  (teema puudub)  

Tänud!!!
Nokia E51 sain tööle, aga E60 mitte, korraks võetakse sinihamba ühendus ülesse ning siis kohe katkeb Sad
Panin tähele, et pärast mobla restarti muutub DUN kanal.
Syslog'ist leidsin sellise kirje ainult:
Tsitaat:
Jun 18 19:14:36 ilmar pppd[19436]: pppd 2.4.5 started by root, uid 0
Jun 18 19:14:41 ilmar bluetoothd[18298]: link_key_request (sba=00:02:72:05:E4:93, dba=00:12:D2:51:B6:7C)
Jun 18 19:14:41 ilmar pppd[19436]: Failed to open /dev/rfcomm0: Connection refused
Jun 18 19:14:41 ilmar pppd[19436]: Exit.

_________________
Ilmar

https://www.dropbox.com/referrals/NTM2MDA2MTI5

DaStoned
Pingviini aktivist
Pingviini aktivist


Vanus: 42
Liitunud: 11.01.2007
Postitused: 388
Asukoht: Tallinn
Distributsioon: Debian
estonia.gif
postituspostitatud: 18.06.2009, 19:42  postituse pealkiri:  (teema puudub)  

Kui ma nüüd õieti aru sain, siis saab olla üks rfcomm kirje mobiili kohta.

Oma teise mobiili jaoks võta uuesti lahti "/etc/bluetooth/rfcomm.conf" fail ja lisa sinna järgmine kirje rfcomm1, millele lisa tolle telefoni MAC aadress.

Muutuva DUN kanali kohta oli lühike selle peatüki lõpus:
https://help.ubuntu.com/community/BluetoothDialup#Configuring%20the%20rfcomm%20device

Loe üle, ehk on kasu.

_________________
When the shit hits the fan, keep your mouth shut!

ilmar
Pingviini kasutaja
Pingviini kasutaja


Vanus: 59
Liitunud: 21.07.2006
Postitused: 41
Asukoht: Tallinn
Distributsioon: Ubuntu 10.10
estonia.gif
postituspostitatud: 18.06.2009, 20:44  postituse pealkiri:  (teema puudub)  

Tsitaat:
Oma teise mobiili jaoks võta uuesti lahti "/etc/bluetooth/rfcomm.conf" fail ja lisa sinna järgmine kirje rfcomm1, millele lisa tolle telefoni MAC aadress.

Just nii ma tegingi, lisan siia rfcomm.conf

Tsitaat:
#
# RFCOMM configuration file.
#

#rfcomm0 {
# # Automatically bind the device at startup
# bind no;
#
# # Bluetooth address of the device
# device 11:22:33:44:55:66;
#
# # RFCOMM channel for the connection
# channel 1;
#
# # Description of the connection
# comment "Example Bluetooth device";
#}

rfcomm0 {
bind yes;
device 00:12:D2:51:B6:7C;
channel 2;
comment "Nokia E60";
}

rfcomm1 {
bind yes;
device 00:1D:6E:BC:30:79;
channel 2;
comment "Nokia E51";
}


Aga see artikkel jäi mulle pisut arusaamatuks tänu minu kesisele ingliskeele oskusele Sad

_________________
Ilmar

https://www.dropbox.com/referrals/NTM2MDA2MTI5

DaStoned
Pingviini aktivist
Pingviini aktivist


Vanus: 42
Liitunud: 11.01.2007
Postitused: 388
Asukoht: Tallinn
Distributsioon: Debian
estonia.gif
postituspostitatud: 19.06.2009, 16:21  postituse pealkiri:  (teema puudub)  

Ega seal mingit head lahendust polegi. Sa saad näiteks /dev/rfcomm2 tekitada otse käsurealt iga kord kui vaja selle telefoniga ühendada:

Kood:
sdptool search DUN
rfcomm bind 2 telefoni-mac telefoni-DUN-kanal

... kasutad kuni vaja ja siis ...

rfcomm release 2


Aga ega ma seal inimlikku lahendust ei leidnudki.

_________________
When the shit hits the fan, keep your mouth shut!

ilmar
Pingviini kasutaja
Pingviini kasutaja


Vanus: 59
Liitunud: 21.07.2006
Postitused: 41
Asukoht: Tallinn
Distributsioon: Ubuntu 10.10
estonia.gif
postituspostitatud: 19.06.2009, 19:25  postituse pealkiri:  (teema puudub)  

No jah sellest sain isegi aru, lootsin leida sealt õpetust sellest kuidas seda kanali uuendamist automatiseerida.
Mul juba olemas /dev/rfcomm = Nokia E60 ja /dev/rfcomm1 = Nokia E51
Nokia E51 toimib, aga Nokia E60 mitte.
Aga hea et ühegi tööle sain, ehk on viga hoopis moblas Sad
Tänud sulle abi eest DaStoned Smile

_________________
Ilmar

https://www.dropbox.com/referrals/NTM2MDA2MTI5

DaStoned
Pingviini aktivist
Pingviini aktivist


Vanus: 42
Liitunud: 11.01.2007
Postitused: 388
Asukoht: Tallinn
Distributsioon: Debian
estonia.gif
postituspostitatud: 19.06.2009, 21:56  postituse pealkiri:  (teema puudub)  

Ma kiire googeldamise peale ei leidnud igatahes ühtegi head võimalust seda DUN kanali hüppamist arvesse võtta. Kõik virisevad.

Aga sellest hoolimata peaks nettus töötama, kui sa kanali oled õieti valinud.

Arvesta, et sa pead teise telefoni jaoks uued PPP peer failid tegema (seal on see va rfcomm seade kirjas). Et kokku tuleb kaks komplekti faile. Totter, aga nii on.

_________________
When the shit hits the fan, keep your mouth shut!

ilmar
Pingviini kasutaja
Pingviini kasutaja


Vanus: 59
Liitunud: 21.07.2006
Postitused: 41
Asukoht: Tallinn
Distributsioon: Ubuntu 10.10
estonia.gif
postituspostitatud: 19.06.2009, 23:34  postituse pealkiri:  (teema puudub)  

On tehtud mõlema mobla jaoks eraldi PPP peer failid, mobla näitab, et korra tõmmatakse sinihammas püsti aga paari sekundi pärast kukub see jälle maha.
Syslog'is vaid selline kirje:
Tsitaat:
Jun 20 00:28:14 ilmar pppd[16496]: pppd 2.4.5 started by root, uid 0
Jun 20 00:28:17 ilmar bluetoothd[16330]: link_key_request (sba=00:02:72:05:E4:93, dba=00:12:D2:51:B6:7C)
Jun 20 00:28:17 ilmar pppd[16496]: Failed to open /dev/rfcomm0: Connection refused
Jun 20 00:28:17 ilmar pppd[16496]: Exit.

_________________
Ilmar

https://www.dropbox.com/referrals/NTM2MDA2MTI5

-IFFI-
Vana Pingviin
Vana Pingviin


Vanus: 47
Liitunud: 25.06.2005
Postitused: 1411
Asukoht: Lappeenranta-Turku
Distributsioon: Linux MX
finland.gif
postituspostitatud: 21.06.2009, 15:08  postituse pealkiri:  (teema puudub)  

Tänud abilistele Wink Kogu konks oli selles, et pidin moblas aint ära muutma mälu kasutuse. Ei ilmunud ikooni sellepärast, et andmeside kasutas massmälu. Panin andmeside kasutatavaks mäluks telefonimälu ning asi toimis koheselt.


Näita (aja järgi):      
Postita uus teemaVasta teemale


Vaata järgmist teemat
Vaata eelmist teemat
Powered by phpBB2 Plus based on phpBB © 2001/7 phpBB Group