Kuidas mountida nokia mobiili?

[ 1.101192] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 1.101356] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.101521] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.101665] ACPI: Power Resource [FN00] (on)
[ 1.101826] ACPI: WMI: Mapper loaded
[ 1.101877] SCSI subsystem initialized
[ 1.101877] libata version 3.00 loaded.
[ 1.101877] usbcore: registered new interface driver usbfs
[ 1.101877] usbcore: registered new interface driver hub
[ 1.101877] usbcore: registered new device driver usb
[ 1.101877] PCI: Using ACPI for IRQ routing
[ 1.108011] Bluetooth: Core ver 2.13
[ 1.108026] NET: Registered protocol family 31
[ 1.108026] Bluetooth: HCI device and connection manager initialized
[ 1.108026] Bluetooth: HCI socket layer initialized
[ 1.108026] NET: Registered protocol family 8
[ 1.108026] NET: Registered protocol family 20
[ 1.108035] NetLabel: Initializing
[ 1.108037] NetLabel: domain hash size = 128
[ 1.108039] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.108052] NetLabel: unlabeled traffic allowed by default
[ 1.108068] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.108074] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.112070] AppArmor: AppArmor Filesystem Enabled
[ 1.116010] Switched to high resolution mode on CPU 0
[ 1.116462] Switched to high resolution mode on CPU 1
[ 1.120010] pnp: PnP ACPI init
[ 1.120021] ACPI: bus type pnp registered
[ 1.121771] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.4 BAR 7 (0x1000-0x1fff), disabling
[ 1.122599] pnp: PnP ACPI: found 8 devices
[ 1.122601] ACPI: ACPI bus type pnp unregistered
[ 1.122604] PnPBIOS: Disabled by ACPI PNP
[ 1.122614] system 00:01: ioport range 0x800-0x80f has been reserved
[ 1.122617] system 00:01: ioport range 0x810-0x817 has been reserved
[ 1.122619] system 00:01: ioport range 0x820-0x823 has been reserved
[ 1.122622] system 00:01: ioport range 0x400-0x47f has been reserved
[ 1.122624] system 00:01: ioport range 0x500-0x57f has been reserved
[ 1.122627] system 00:01: ioport range 0x580-0x5ff has been reserved
[ 1.122629] system 00:01: ioport range 0x600-0x627 has been reserved
[ 1.122633] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
[ 1.122636] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.122639] system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
[ 1.122642] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 1.122644] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 1.122647] system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
[ 1.122650] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 1.122653] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 1.122656] system 00:01: iomem range 0xff800000-0xffffffff could not be reserved
[ 1.157361] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.157365] pci 0000:00:1c.0: IO window: 0x2000-0x3fff
[ 1.157372] pci 0000:00:1c.0: MEM window: 0x93600000-0x945fffff
[ 1.157377] pci 0000:00:1c.0: PREFETCH window: 0x00000090400000-0x000000914fffff
[ 1.157386] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
[ 1.157390] pci 0000:00:1c.4: IO window: 0x1000-0x1fff
[ 1.157396] pci 0000:00:1c.4: MEM window: 0x92600000-0x935fffff
[ 1.157401] pci 0000:00:1c.4: PREFETCH window: 0x00000091500000-0x000000924fffff
[ 1.157410] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 1.157411] pci 0000:00:1e.0: IO window: disabled
[ 1.157418] pci 0000:00:1e.0: MEM window: disabled
[ 1.157423] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.157440] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.157446] pci 0000:00:1c.0: setting latency timer to 64
[ 1.157455] pci 0000:00:1c.4: enabling device (0000 -> 0003)
[ 1.157459] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.157466] pci 0000:00:1c.4: setting latency timer to 64
[ 1.157475] pci 0000:00:1e.0: setting latency timer to 64
[ 1.157479] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.157481] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 1.157484] bus: 02 index 0 io port: [0x2000-0x3fff]
[ 1.157486] bus: 02 index 1 mmio: [0x93600000-0x945fffff]
[ 1.157488] bus: 02 index 2 mmio: [0x90400000-0x914fffff]
[ 1.157490] bus: 02 index 3 mmio: [0x0-0x0]
[ 1.157492] bus: 06 index 0 io port: [0x1000-0x1fff]
[ 1.157494] bus: 06 index 1 mmio: [0x92600000-0x935fffff]
[ 1.157496] bus: 06 index 2 mmio: [0x91500000-0x924fffff]
[ 1.157498] bus: 06 index 3 mmio: [0x0-0x0]
[ 1.157500] bus: 03 index 0 mmio: [0x0-0x0]
[ 1.157502] bus: 03 index 1 mmio: [0x0-0x0]
[ 1.157504] bus: 03 index 2 mmio: [0x0-0x0]
[ 1.157505] bus: 03 index 3 io port: [0x00-0xffff]
[ 1.157507] bus: 03 index 4 mmio: [0x000000-0xffffffff]
[ 1.157517] NET: Registered protocol family 2
[ 1.172057] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.172315] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.172824] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.173162] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.173165] TCP reno registered
[ 1.180129] NET: Registered protocol family 1
[ 1.180263] checking if image is initramfs... it is
[ 1.787519] Freeing initrd memory: 7477k freed
[ 1.787563] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 1.787565] Simple Boot Flag at 0x44 set to 0x1
[ 1.787765] cpufreq: No nForce2 chipset.
[ 1.787911] audit: initializing netlink socket (disabled)
[ 1.787936] type=2000 audit(1245002897.784:1): initialized
[ 1.794994] highmem bounce pool size: 64 pages
[ 1.794999] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.796290] VFS: Disk quotas dquot_6.5.1
[ 1.796349] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.796940] fuse init (API version 7.10)
[ 1.797024] msgmni has been set to 1701
[ 1.797200] alg: No test for stdrng (krng)
[ 1.797211] io scheduler noop registered
[ 1.797213] io scheduler anticipatory registered
[ 1.797215] io scheduler deadline registered
[ 1.797230] io scheduler cfq registered (default)
[ 1.797242] pci 0000:00:02.0: Boot video device
[ 9.796007] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 17.796007] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 17.799291] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 17.799345] pcieport-driver 0000:00:1c.0: found MSI capability
[ 17.799384] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
[ 17.799401] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 17.799416] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 17.799428] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 17.799505] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 17.799558] pcieport-driver 0000:00:1c.4: found MSI capability
[ 17.799594] pcieport-driver 0000:00:1c.4: irq 2302 for MSI/MSI-X
[ 17.799610] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 17.799622] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 17.799633] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 17.799718] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.799804] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 17.799958] ACPI: AC Adapter [ADP0] (on-line)
[ 17.801076] ACPI: Battery Slot [BAT0] (battery present)
[ 17.801155] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 17.801158] ACPI: Power Button (FF) [PWRF]
[ 17.801201] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 17.801203] ACPI: Power Button (CM) [PWRB]
[ 17.801242] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 17.803504] ACPI: Lid Switch [LID0]
[ 17.803745] fan PNP0C0B:00: registered as cooling_device0
[ 17.803751] ACPI: Fan [FAN] (on)
[ 17.804473] ACPI: SSDT 77B77C18, 026B (r1 PmRef Cpu0Ist 3000 INTL 20051117)
[ 17.805031] ACPI: SSDT 77B75598, 0537 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
[ 17.805648] Monitor-Mwait will be used to enter C-1 state
[ 17.805651] Monitor-Mwait will be used to enter C-2 state
[ 17.805667] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 17.805685] processor ACPI_CPU:00: registered as cooling_device1
[ 17.805689] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 17.806190] ACPI: SSDT 77B76E18, 01CF (r1 PmRef ApIst 3000 INTL 20051117)
[ 17.806755] ACPI: SSDT 77B77F18, 008D (r1 PmRef ApCst 3000 INTL 20051117)
[ 17.807461] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 17.807478] processor ACPI_CPU:01: registered as cooling_device2
[ 17.807482] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 17.810488] thermal LNXTHERM:01: registered as thermal_zone0
[ 17.810766] ACPI: Transitioning device [FAN] to D3
[ 17.810900] ACPI: Thermal Zone [THRM] (0 C)
[ 17.810949] isapnp: Scanning for PnP cards...
[ 18.164834] isapnp: No Plug & Play device found
[ 18.172759] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 18.173728] brd: module loaded
[ 18.174024] loop: module loaded
[ 18.174088] Fixed MDIO Bus: probed
[ 18.174093] PPP generic driver version 2.4.2
[ 18.174150] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 18.174182] Driver 'sd' needs updating - please use bus_type methods
[ 18.174191] Driver 'sr' needs updating - please use bus_type methods
[ 18.174229] ahci 0000:00:1f.2: version 3.0
[ 18.174247] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 18.174296] ahci 0000:00:1f.2: irq 2301 for MSI/MSI-X
[ 18.174393] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 18.174396] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ems
[ 18.174402] ahci 0000:00:1f.2: setting latency timer to 64
[ 18.174743] scsi0 : ahci
[ 18.174856] scsi1 : ahci
[ 18.174913] scsi2 : ahci
[ 18.174965] scsi3 : ahci
[ 18.175019] scsi4 : ahci
[ 18.175073] scsi5 : ahci
[ 18.175186] ata1: SATA max UDMA/133 abar m2048@0x94605000 port 0x94605100 irq 2301
[ 18.175190] ata2: SATA max UDMA/133 abar m2048@0x94605000 port 0x94605180 irq 2301
[ 18.175192] ata3: DUMMY
[ 18.175194] ata4: DUMMY
[ 18.175196] ata5: SATA max UDMA/133 abar m2048@0x94605000 port 0x94605300 irq 2301
[ 18.175200] ata6: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 2301
[ 18.656017] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 18.656474] ata1.00: ATA-8: FUJITSU MHZ2250BH G1, 00400209, max UDMA/100
[ 18.656477] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 18.657057] ata1.00: configured for UDMA/100
[ 18.992018] ata2: SATA link down (SStatus 0 SControl 300)
[ 19.328018] ata5: SATA link down (SStatus 0 SControl 300)
[ 20.232018] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 20.245664] ata6.00: ATAPI: TSSTcorp CDDVDW TS-L633A, TO01, max UDMA/100, ATAPI AN
[ 20.288299] ata6.00: configured for UDMA/100
[ 20.396124] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2250B 0040 PQ: 0 ANSI: 5
[ 20.396215] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 20.396231] sd 0:0:0:0: [sda] Write Protect is off
[ 20.396233] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.396258] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.396328] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 20.396342] sd 0:0:0:0: [sda] Write Protect is off
[ 20.396344] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.396368] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.396371] sda: sda1 < sda5 sda6 sda7 > sda3
[ 20.814384] sd 0:0:0:0: [sda] Attached SCSI disk
[ 20.814433] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 21.104472] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A TO01 PQ: 0 ANSI: 5
[ 21.227547] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 21.227550] Uniform CD-ROM driver Revision: 3.20
[ 21.227652] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 21.227689] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 21.228357] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 21.228381] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 21.228402] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 21.228405] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 21.228460] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 21.232366] ehci_hcd 0000:00:1a.7: debug port 1
[ 21.232373] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 21.232389] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94605c00
[ 21.248009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 21.248072] usb usb1: configuration #1 chosen from 1 choice
[ 21.248097] hub 1-0:1.0: USB hub found
[ 21.248104] hub 1-0:1.0: 4 ports detected
[ 21.248206] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 21.248219] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 21.248223] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 21.248262] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 21.252171] ehci_hcd 0000:00:1d.7: debug port 1
[ 21.252178] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 21.252191] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x94605800
[ 21.268008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 21.268077] usb usb2: configuration #1 chosen from 1 choice
[ 21.268100] hub 2-0:1.0: USB hub found
[ 21.268108] hub 2-0:1.0: 8 ports detected
[ 21.268205] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 21.268221] uhci_hcd: USB Universal Host Controller Interface driver
[ 21.268252] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.268260] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 21.268263] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 21.268302] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 21.268339] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040e0
[ 21.268415] usb usb3: configuration #1 chosen from 1 choice
[ 21.268438] hub 3-0:1.0: USB hub found
[ 21.268445] hub 3-0:1.0: 2 ports detected
[ 21.268527] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 21.268534] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 21.268537] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 21.268576] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 21.268611] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
[ 21.268682] usb usb4: configuration #1 chosen from 1 choice
[ 21.268705] hub 4-0:1.0: USB hub found
[ 21.268713] hub 4-0:1.0: 2 ports detected
[ 21.268794] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 21.268801] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 21.268804] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 21.268848] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 21.268875] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0
[ 21.268947] usb usb5: configuration #1 chosen from 1 choice
[ 21.268970] hub 5-0:1.0: USB hub found
[ 21.268980] hub 5-0:1.0: 2 ports detected
[ 21.269062] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 21.269068] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 21.269072] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 21.269110] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 21.269136] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
[ 21.269208] usb usb6: configuration #1 chosen from 1 choice
[ 21.269231] hub 6-0:1.0: USB hub found
[ 21.269239] hub 6-0:1.0: 2 ports detected
[ 21.269329] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 21.269335] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 21.269339] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 21.269378] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 21.269406] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00004060
[ 21.269476] usb usb7: configuration #1 chosen from 1 choice
[ 21.269499] hub 7-0:1.0: USB hub found
[ 21.269505] hub 7-0:1.0: 2 ports detected
[ 21.269583] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 21.269589] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 21.269593] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 21.269633] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 21.269669] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004040
[ 21.269737] usb usb8: configuration #1 chosen from 1 choice
[ 21.269760] hub 8-0:1.0: USB hub found
[ 21.269767] hub 8-0:1.0: 2 ports detected
[ 21.269897] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 21.298494] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.298499] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 21.300538] mice: PS/2 mouse device common for all mice
[ 21.316564] rtc_cmos 00:03: RTC can wake from S4
[ 21.316599] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 21.316632] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 21.316694] device-mapper: uevent: version 1.0.3
[ 21.316788] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 21.316857] device-mapper: multipath: version 1.0.5 loaded
[ 21.316859] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 21.316933] EISA: Probing bus 0 at eisa.0
[ 21.316940] Cannot allocate resource for EISA slot 1
[ 21.316942] Cannot allocate resource for EISA slot 2
[ 21.316944] Cannot allocate resource for EISA slot 3
[ 21.316947] Cannot allocate resource for EISA slot 4
[ 21.316966] EISA: Detected 0 cards.
[ 21.317061] cpuidle: using governor ladder
[ 21.317148] cpuidle: using governor menu
[ 21.317654] TCP cubic registered
[ 21.317749] NET: Registered protocol family 10
[ 21.318182] lo: Disabled Privacy Extensions
[ 21.318511] NET: Registered protocol family 17
[ 21.318530] Bluetooth: L2CAP ver 2.11
[ 21.318532] Bluetooth: L2CAP socket layer initialized
[ 21.318535] Bluetooth: SCO (Voice Link) ver 0.6
[ 21.318536] Bluetooth: SCO socket layer initialized
[ 21.318569] Bluetooth: RFCOMM socket layer initialized
[ 21.318575] Bluetooth: RFCOMM TTY layer initialized
[ 21.318577] Bluetooth: RFCOMM ver 1.10
[ 21.319182] Using IPI No-Shortcut mode
[ 21.319261] registered taskstats version 1
[ 21.319384] Magic number: 13:26:140
[ 21.319404] block ram5: hash matches
[ 21.319425] acpi device:11: hash matches
[ 21.319473] Marking TSC unstable due to TSC halts in idle
[ 21.319481] rtc_cmos 00:03: setting system clock to 2009-06-14 18:08:38 UTC (1245002918)
[ 21.319484] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 21.319486] EDD information not available.
[ 21.319771] Freeing unused kernel memory: 532k freed
[ 21.319910] Write protecting the kernel text: 4112k
[ 21.319962] Write protecting the kernel read-only data: 1524k
[ 21.358419] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 21.384134] compcache: Compressed swap size set to: 482192 KB
[ 21.384630] TLSF: pool: f7d74000, init_size=16384, max_size=0, grow_size=16384
[ 21.523551] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 21.523572] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.523627] r8169 0000:02:00.0: setting latency timer to 64
[ 21.523911] r8169 0000:02:00.0: irq 2300 for MSI/MSI-X
[ 21.524640] eth0: RTL8102e at 0xf7df6000, 00:1e:33:67:cc:96, XID 34a00000 IRQ 2300
[ 21.560703] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 21.655907] Adding 482188k swap on /dev/ramzswap0. Priority:100 extents:1 across:482188k
[ 21.731653] usb 1-2: configuration #1 chosen from 1 choice
[ 21.844086] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 21.911341] PM: Starting manual resume from disk
[ 21.911345] PM: Resume from partition 8:5
[ 21.911347] PM: Checking hibernation image.
[ 21.911533] PM: Resume from disk failed.
[ 21.944108] kjournald starting. Commit interval 5 seconds
[ 21.944117] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.987443] usb 2-1: configuration #1 chosen from 1 choice
[ 22.000056] Clocksource tsc unstable (delta = -76749156 ns)
[ 22.100079] usb 2-6: new high speed USB device using ehci_hcd and address 3
[ 22.247303] usb 2-6: configuration #1 chosen from 1 choice
[ 23.995845] udev: starting version 141
[ 24.460117] cfg80211: Calling CRDA to update world regulatory domain
[ 24.542673] Initializing USB Mass Storage driver...
[ 24.543846] usb-storage: probe of 2-1:1.0 failed with error -5
[ 24.543914] usb-storage: probe of 2-1:1.1 failed with error -5
[ 24.544558] usb-storage: probe of 2-1:1.2 failed with error -1
[ 24.545383] usb-storage: probe of 2-1:1.3 failed with error -1
[ 24.545411] usbcore: registered new interface driver usb-storage
[ 24.545448] USB Mass Storage support registered.
[ 24.587980] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 24.678068] iTCO_vendor_support: vendor-support=0
[ 24.876088] Linux agpgart interface v0.103
[ 24.919255] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 24.919843] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
[ 24.922192] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 24.997183] usbcore: registered new interface driver usbserial
[ 24.997323] USB Serial support registered for generic
[ 24.997419] usbcore: registered new interface driver usbserial_generic
[ 24.997422] usbserial: USB Serial Driver core
[ 25.237365] acpi device:04: registered as cooling_device3
[ 25.237896] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
[ 25.244168] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 25.378393] Linux video capture interface: v2.00
[ 25.434569] USB Serial support registered for GSM modem (1-port)
[ 25.434643] option 2-1:1.0: GSM modem (1-port) converter detected
[ 25.434806] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 25.434818] option 2-1:1.1: GSM modem (1-port) converter detected
[ 25.434908] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 25.434932] usbcore: registered new interface driver option
[ 25.434935] option: v0.7.2:USB Driver for GSM modems
[ 25.454937] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 25.463420] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 25.463531] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 25.463645] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 25.570814] cfg80211: World regulatory domain updated:
[ 25.570819] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 25.570822] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.570824] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 25.570826] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 25.570828] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.570831] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.762827] uvcvideo: Found UVC 1.00 device CNF7051 (04f2:b070)
[ 25.764371] input: CNF7051 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7
[ 25.768144] usbcore: registered new interface driver uvcvideo
[ 25.768168] USB Video Class driver (v0.1.0)
[ 26.047219] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 26.047338] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 26.078167] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[ 26.102636] rtl8187: 8187B chip detected. Support is EXPERIMENTAL, and could damage your
[ 26.102638] hardware, use at your own risk
[ 26.103561] phy0: Selected rate control algorithm 'pid'
[ 26.142909] phy0: hwaddr 00:21:63:6b:c5:3c, RTL8187BvE V0 + rtl8225z2
[ 26.142937] usbcore: registered new interface driver rtl8187
[ 26.504193] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04711/0xa04000
[ 26.504199] synaptics: Toshiba Satellite L350 detected, limiting rate to 40pps.
[ 26.581133] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 26.807391] lp: driver loaded but no devices found
[ 27.207945] Adding 1951824k swap on /dev/sda5. Priority:-1 extents:1 across:1951824k
[ 27.536457] EXT3 FS on sda6, internal journal
[ 28.464700] kjournald starting. Commit interval 5 seconds
[ 28.465037] EXT3 FS on sda7, internal journal
[ 28.465041] EXT3-fs: mounted filesystem with ordered data mode.
[ 29.051185] type=1505 audit(1245002926.228:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2045
[ 29.051314] type=1505 audit(1245002926.228:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2045
[ 29.051358] type=1505 audit(1245002926.228:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2045
[ 29.051395] type=1505 audit(1245002926.228:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2045
[ 29.093705] type=1505 audit(1245002926.272:6): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=2050
[ 29.231273] type=1505 audit(1245002926.409:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2054
[ 29.231465] type=1505 audit(1245002926.409:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2054
[ 29.274106] type=1505 audit(1245002926.452:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2058
[ 29.545367] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 29.571438] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 29.571621] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 29.571623] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[ 29.571625] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 29.618045] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 38.311783] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 38.311787] vboxdrv: Successfully done.
[ 38.311789] vboxdrv: Found 2 processor cores.
[ 38.311880] vboxdrv: fAsync=0 offMin=0x1b0 offMax=0x84c
[ 38.311925] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 38.311927] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009).
[ 40.522815] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 40.522818] Bluetooth: BNEP filters: protocol multicast
[ 40.541944] Bridge firewalling registered
[ 42.962579] ppdev: user-space parallel port driver
[ 44.888886] [drm] Initialized drm 1.1.0 20060810
[ 44.894074] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 44.894080] pci 0000:00:02.0: setting latency timer to 64
[ 44.894345] pci 0000:00:02.0: irq 2299 for MSI/MSI-X
[ 44.894438] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 44.896647] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 46.822300] r8169: eth0: link down
[ 46.822504] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 62.793427] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 250.743685] CPU0 attaching NULL sched-domain.
[ 250.743691] CPU1 attaching NULL sched-domain.
[ 250.743783] CPU0 attaching sched-domain:
[ 250.743786] domain 0: span 0-1 level MC
[ 250.743789] groups: 0 1
[ 250.743794] CPU1 attaching sched-domain:
[ 250.743796] domain 0: span 0-1 level MC
[ 250.743798] groups: 1 0
[ 250.805792] CPU0 attaching NULL sched-domain.
[ 250.805804] CPU1 attaching NULL sched-domain.
[ 250.816161] CPU0 attaching sched-domain:
[ 250.816167] domain 0: span 0-1 level MC
[ 250.816172] groups: 0 1
[ 250.816185] CPU1 attaching sched-domain:
[ 250.816188] domain 0: span 0-1 level MC
[ 250.816193] groups: 1 0
[ 252.329871] PPP BSD Compression module registered
[ 252.448142] PPP Deflate Compression module registered
[ 1931.539262] sr0: CDROM not ready. Make sure there is a disc in the drive.
[ 2176.427023] sr0: CDROM not ready. Make sure there is a disc in the drive.
[ 2960.156549] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 2960.331776] usb 5-2: configuration #1 chosen from 1 choice
[ 2960.435194] cdc_acm 5-2:1.10: ttyACM0: USB ACM device
[ 2960.437792] usbcore: registered new interface driver cdc_acm
[ 2960.437800] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2960.504800] usbcore: registered new interface driver cdc_ether
[ 2960.506964] usb 5-2: bad CDC descriptors
[ 2960.506987] usbcore: registered new interface driver rndis_host
[ 2960.522480] usb 5-2: bad CDC descriptors
[ 2960.522510] usbcore: registered new interface driver rndis_wlan
[ 4086.216132] usb 5-2: USB disconnect, address 2
[ 4126.024061] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 4126.198244] usb 5-2: configuration #1 chosen from 1 choice
[ 4126.232329] cdc_acm 5-2:1.10: ttyACM0: USB ACM device
[ 4126.241381] usb 5-2: bad CDC descriptors
[ 4126.241399] usb 5-2: bad CDC descriptors
[ 6242.080086] usb 5-2: USB disconnect, address 3
[ 8693.241771] UDF-fs: No VRS found
[ 8693.299265] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 8693.560083] ISOFS: changing to secondary root
[88057.284547] usb 6-1: new full speed USB device using uhci_hcd and address 2
[88057.456384] usb 6-1: configuration #1 chosen from 1 choice
[88057.468360] cdc_acm 6-1:1.10: ttyACM0: USB ACM device
[88057.474398] usb 6-1: bad CDC descriptors
[88057.474418] usb 6-1: bad CDC descriptors
[88111.592099] usb 6-1: USB disconnect, address 2
[88117.032046] usb 5-2: new full speed USB device using uhci_hcd and address 4
[88117.265628] usb 5-2: configuration #1 chosen from 1 choice
[88117.276327] cdc_acm 5-2:1.10: ttyACM0: USB ACM device
[88117.283385] usb 5-2: bad CDC descriptors
[88117.283405] usb 5-2: bad CDC descriptors
[88165.836558] usb 2-3: new high speed USB device using ehci_hcd and address 8
[88165.972285] usb 2-3: configuration #1 chosen from 1 choice
[88165.974578] scsi10 : SCSI emulation for USB Mass Storage devices
[88165.974858] usb-storage: device found at 8
[88165.974862] usb-storage: waiting for device to settle before scanning
[88170.972399] usb-storage: device scan complete
[88170.973193] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[88170.977531] sd 10:0:0:0: [sdb] 31506432 512-byte hardware sectors: (16.1 GB/15.0 GiB)
[88170.978275] sd 10:0:0:0: [sdb] Write Protect is off
[88170.978282] sd 10:0:0:0: [sdb] Mode Sense: 23 00 00 00
[88170.978286] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[88171.001051] sd 10:0:0:0: [sdb] 31506432 512-byte hardware sectors: (16.1 GB/15.0 GiB)
[88171.001812] sd 10:0:0:0: [sdb] Write Protect is off
[88171.001818] sd 10:0:0:0: [sdb] Mode Sense: 23 00 00 00
[88171.001824] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[88171.001835] sdb: sdb1
[88171.218459] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[88171.221025] sd 10:0:0:0: Attached scsi generic sg2 type 0
[88395.229385] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[90859.680136] usb 5-2: USB disconnect, address 4
[92167.419678] usb 2-3: USB disconnect, address 8
[92212.296086] usb 6-1: new full speed USB device using uhci_hcd and address 3
[92212.476051] usb 6-1: configuration #1 chosen from 1 choice
[92212.490298] cdc_acm 6-1:1.10: ttyACM0: USB ACM device
[92212.497380] usb 6-1: bad CDC descriptors
[92212.497399] usb 6-1: bad CDC descriptors