Partitsioonidega probleem :: Pingviini veeb

hirax@hirax-desktop ~ $ sudo /usr/sbin/smartctl -a /dev/sda
[sudo] password for hirax:
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-59-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue Serial ATA
Device Model: WDC WD5000AAKS-00V1A0
Serial Number: WD-WMAWF1497924
LU WWN Device Id: 5 0014ee 0572481da
Firmware Version: 05.01D05
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Mar 2 23:46:52 2014 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
            was suspended by an interrupting command from host.
            Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
            without error or no self-test has ever
            been run.
Total time to complete Offline
data collection:    ( 7560) seconds.
Offline data collection
capabilities:       (0x7b) SMART execute Offline immediate.
            Auto Offline data collection on/off support.
            Suspend Offline collection upon new
            command.
            Offline surface scan supported.
            Self-test supported.
            Conveyance Self-test supported.
            Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
            power-saving mode.
            Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
            General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 91) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities:    (0x303f) SCT Status supported.
            SCT Error Recovery Control supported.
            SCT Feature Control supported.
            SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 142 140 021 Pre-fail Always - 3900
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3266
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 9082
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3250
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 404
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2860
194 Temperature_Celsius 0x0022 110 101 000 Old_age Always - 33
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 1219
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 9068 -
# 2 Short offline Completed without error 00% 9068 -
# 3 Short offline Completed without error 00% 1 -
# 4 Short offline Completed without error 00% 1 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

hirax@hirax-desktop ~ $