RedBoot(tm) bootstrap and debug environment [ROM]

Platform: ComBoard With Lan (Freescale MCF5208)
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limited

RAM: 0x40000000-0x41000000, [0x4000de58-0x40fd1000] available
FLASH: 0x00000000-0x001fffff, 32 x 0x10000 blocks
== Executing boot script in 2.000 seconds - enter ^C to abort
RedBoot> load cmb_lan_tarmo.bin -r -b 0x40040000
Using default protocol (TFTP)
Raw file loaded 0x40040000-0x400dd45b, assumed entry at 0x40040000
RedBoot> go
CMB LAN Application Start v0.02
Threads creating ... RS485 Communication Thread created.
OK
Threads starting ... OK
File system mounting ... Success.
Network interfaces initialization ...
Found fconfig's MAC 00:34:77:BB:00:20 from address 0x001FF481
Setting MAC address to 00:34:77:BB:00:20
eth0 ioctl(SIOCSIFHWADDR) succeeded

Set DHCP reply timeout to: 1.851968 sec
Current time: 1074158686 ticks
BOOTP[eth0] op: REQUEST
       htype: Ethernet
        hlen: 6
        hops: 0
         xid: 0xeb170020
        secs: 0
       flags: 0x8000
       hw_addr: 00:34:77:bb:00:20
     client IP: 0.0.0.0
         my IP: 10.28.196.36
     server IP: 10.28.194.1
    gateway IP: 0.0.0.0
  options:
        DHCP message: 3 REQUEST
        subnet mask: 255.255.240.0
        DHCP time 58: 345600
        DHCP time 59: 604800
        DHCP time 51: 691200
        DHCP server id: 10.28.194.1
Initializing Jim (Tcl) interpreter ... Done.
HTTP server starting ... Done.
Directory '/countries' open failed.
Directory '/languages' open failed.
Tried to select not supported language (0)
RS485CommunicationThread::Read (Prime for first read)
Route - dst: 0.0.0.0, mask: 0.0.0.0, gateway: 10.28.193.1