Portaal Portaal Pingviini veeb foorumi pealeht
  Viki  |  IRC  |  Otsing  |  Küsimused ja vastused  |  Profiil  |  Privaatsõnumite vaatamiseks logi sisse  | Logi sisse või Registreeru
<empty>
Vaata järgmist teemat
Vaata eelmist teemat

Postita uus teemaVasta teemale
Autor Sõnum
julla
Pingviini kasutaja
Pingviini kasutaja



Liitunud: 19.02.2008
Postitused: 73

Distributsioon: Ubuntu
estonia.gif
postituspostitatud: 24.07.2008, 11:57  postituse pealkiri:  Masin Compal HGL31 ja mälukaardi lugeja  

Kaardilugejaks ENE Technology Inc CB-712/4.
Süsettmiks Ubuntu 8.04.1
Kernel 2.6.24-20-generic.
Uurisin veidi ja see lugeja peaks nagu töötama sellel masinal. Aga ei saa mina tast jagu.
lspci väljund:
Kood:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
06:04.2 SD Host controller: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
06:04.4 FLASH memory: ENE Technology


dmesg välund:
Kood:
[   32.455309] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   32.455531] hpet clockevent registered
[   32.535415] Calibrating delay using timer specific routine.. 3328.87 BogoMIPS (lpj=6657748)
[   32.535541] Security Framework initialized
[   32.535598] SELinux:  Disabled at boot.
[   32.535663] AppArmor: AppArmor initialized
[   32.535716] Failure registering capabilities with primary security module.
[   32.535780] Mount-cache hash table entries: 512
[   32.535969] Initializing cgroup subsys ns
[   32.536024] Initializing cgroup subsys cpuacct
[   32.536086] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[   32.536094] monitor/mwait feature present.
[   32.536145] using mwait in idle threads.
[   32.536200] CPU: L1 I cache: 32K, L1 D cache: 32K
[   32.536284] CPU: L2 cache: 2048K
[   32.536335] CPU: Physical Processor ID: 0
[   32.536386] CPU: Processor Core ID: 0
[   32.536437] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e39d 00000000 00000001 00000000
[   32.536446] Compat vDSO mapped to ffffe000.
[   32.536512] Checking 'hlt' instruction... OK.
[   32.551835] SMP alternatives: switching to UP code
[   32.553570] Early unpacking initramfs... done
[   32.898906] ACPI: Core revision 20070126
[   32.899000] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   32.928904] CPU0: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
[   32.929037] SMP alternatives: switching to SMP code
[   32.929811] Booting processor 1/1 eip 3000
[   32.940065] Initializing CPU#1
[   33.018668] Calibrating delay using timer specific routine.. 3325.04 BogoMIPS (lpj=6650090)
[   33.018675] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[   33.018680] monitor/mwait feature present.
[   33.018683] CPU: L1 I cache: 32K, L1 D cache: 32K
[   33.018685] CPU: L2 cache: 2048K
[   33.018687] CPU: Physical Processor ID: 0
[   33.018689] CPU: Processor Core ID: 1
[   33.018690] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e39d 00000000 00000001 00000000
[   33.019277] CPU1: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
[   33.019782] Total of 2 processors activated (6653.91 BogoMIPS).
[   33.020030] ENABLING IO-APIC IRQs
[   33.020270] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   33.166558] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   33.186632] Brought up 2 CPUs
[   33.186704] CPU0 attaching sched-domain:
[   33.186706]  domain 0: span 03
[   33.186708]   groups: 01 02
[   33.186711] CPU1 attaching sched-domain:
[   33.186713]  domain 0: span 03
[   33.186715]   groups: 02 01
[   33.186943] net_namespace: 64 bytes
[   33.187003] Booting paravirtualized kernel on bare hardware
[   33.187529] Time:  9:28:55  Date: 07/24/08
[   33.187606] NET: Registered protocol family 16
[   33.187853] EISA bus registered
[   33.187906] ACPI: bus type pci registered
[   33.188152] PCI: BIOS BUG #81[49435000] found
[   33.188204] PCI: Using configuration type 1
[   33.188271] Setting up standard PCI resources
[   33.192823] ACPI: EC: Look up EC in DSDT
[   33.194896] ACPI: BIOS _OSI(Linux) query ignored via DMI
[   33.194951] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[   33.195300] ACPI: Interpreter enabled
[   33.195353] ACPI: (supports S0 S3 S4 S5)
[   33.195541] ACPI: Using IOAPIC for interrupt routing
[   33.199950] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[   33.200008] ACPI: EC: driver started in poll mode
[   33.200102] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   33.200999] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[   33.201058] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[   33.202344] PCI: Transparent bridge - 0000:00:1e.0
[   33.202492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   33.202784] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[   33.202910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[   33.203033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[   33.203164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[   33.210237] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[   33.210767] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[   33.211290] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[   33.211855] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[   33.212418] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[   33.213013] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[   33.213610] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[   33.214130] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[   33.214764] Linux Plug and Play Support v0.97 (c) Adam Belay
[   33.214848] pnp: PnP ACPI init
[   33.214903] ACPI: bus type pnp registered
[   33.216669] pnp: PnP ACPI: found 10 devices
[   33.216722] ACPI: ACPI bus type pnp unregistered
[   33.216775] PnPBIOS: Disabled by ACPI PNP
[   33.217053] PCI: Using ACPI for IRQ routing
[   33.217106] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   33.217180] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.3
[   33.217237] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.3
[   33.234599] NET: Registered protocol family 8
[   33.234651] NET: Registered protocol family 20
[   33.234737] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   33.234917] hpet0: 3 64-bit timers, 14318180 Hz
[   33.236004] AppArmor: AppArmor Filesystem Enabled
[   33.238338] Time: tsc clocksource has been installed.
[   33.238403] Switched to high resolution mode on CPU 0
[   33.238547] Switched to high resolution mode on CPU 1
[   33.262304] system 00:01: ioport range 0xfe00-0xfe7f has been reserved
[   33.262361] system 00:01: ioport range 0xfe80-0xfeff has been reserved
[   33.263202] system 00:01: ioport range 0xff00-0xff7f has been reserved
[   33.263260] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[   33.263331] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[   33.263402] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[   33.263473] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[   33.263543] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[   33.263614] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[   33.263685] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
[   33.263756] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[   33.263831] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[   33.263906] system 00:06: ioport range 0x800-0x80f has been reserved
[   33.263963] system 00:06: ioport range 0x1000-0x107f has been reserved
[   33.264019] system 00:06: ioport range 0x1180-0x11bf has been reserved
[   33.294462] PCI: Bridge: 0000:00:1c.0
[   33.294513]   IO window: disabled.
[   33.294567]   MEM window: d0100000-d01fffff
[   33.294622]   PREFETCH window: disabled.
[   33.294678] PCI: Bridge: 0000:00:1c.2
[   33.294731]   IO window: 2000-2fff
[   33.294785]   MEM window: d0200000-d02fffff
[   33.294841]   PREFETCH window: 68000000-680fffff
[   33.294898] PCI: Bridge: 0000:00:1c.3
[   33.294948]   IO window: disabled.
[   33.295002]   MEM window: disabled.
[   33.295055]   PREFETCH window: disabled.
[   33.295118] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[   33.295171]   IO window: 00001400-000014ff
[   33.295226]   IO window: 00001c00-00001cff
[   33.295282]   PREFETCH window: 6c000000-6fffffff
[   33.295338]   MEM window: 70000000-73ffffff
[   33.295393] PCI: Bridge: 0000:00:1e.0
[   33.295444]   IO window: disabled.
[   33.295498]   MEM window: d0000000-d00fffff
[   33.295552]   PREFETCH window: disabled.
[   33.295633] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[   33.295740] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   33.295764] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
[   33.295869] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   33.295893] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
[   33.295999] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   33.296011] PCI: Enabling device 0000:00:1e.0 (0004 -> 0006)
[   33.296070] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   33.296088] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 19
[   33.296199] NET: Registered protocol family 2
[   33.338214] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   33.338490] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   33.339014] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   33.339317] TCP: Hash tables configured (established 131072 bind 65536)
[   33.339374] TCP reno registered
[   33.350265] checking if image is initramfs... it is
[   34.029144] Freeing initrd memory: 7330k freed
[   34.029403] Simple Boot Flag at 0x36 set to 0x1
[   34.030112] audit: initializing netlink socket (disabled)
[   34.030189] audit(1216891735.429:1): initialized
[   34.030451] highmem bounce pool size: 64 pages
[   34.032528] VFS: Disk quotas dquot_6.5.1
[   34.032653] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   34.032845] io scheduler noop registered
[   34.032897] io scheduler anticipatory registered
[   34.032949] io scheduler deadline registered
[   34.033011] io scheduler cfq registered (default)
[   34.033075] Boot video device is 0000:00:02.0
[   34.033290] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   34.033350] assign_interrupt_mode Found MSI capability
[   34.033453] Allocate Port Service[0000:00:1c.0:pcie00]
[   34.033488] Allocate Port Service[0000:00:1c.0:pcie02]
[   34.033590] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   34.033650] assign_interrupt_mode Found MSI capability
[   34.033749] Allocate Port Service[0000:00:1c.2:pcie00]
[   34.033781] Allocate Port Service[0000:00:1c.2:pcie02]
[   34.033882] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   34.033941] assign_interrupt_mode Found MSI capability
[   34.034040] Allocate Port Service[0000:00:1c.3:pcie00]
[   34.034074] Allocate Port Service[0000:00:1c.3:pcie02]
[   34.034341] isapnp: Scanning for PnP cards...
[   34.388273] isapnp: No Plug & Play device found
[   34.413981] Real Time Clock Driver v1.12ac
[   34.414261] hpet_resources: 0xfed00000 is busy
[   34.414287] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   34.415567] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   34.415707] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   34.415872] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   34.437472] i8042.c: Detected active multiplexing controller, rev 1.1.
[   34.454264] serio: i8042 KBD port at 0x60,0x64 irq 1
[   34.454321] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   34.454378] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   34.454433] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   34.454487] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   34.469550] mice: PS/2 mouse device common for all mice
[   34.469717] EISA: Probing bus 0 at eisa.0
[   34.469773] Cannot allocate resource for EISA slot 1
[   34.469827] Cannot allocate resource for EISA slot 2
[   34.469905] EISA: Detected 0 cards.
[   34.469957] cpuidle: using governor ladder
[   34.470008] cpuidle: using governor menu
[   34.470141] NET: Registered protocol family 1
[   34.470220] Using IPI No-Shortcut mode
[   34.470300] registered taskstats version 1
[   34.470461]   Magic number: 0:688:475
[   34.470590] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   34.470644] EDD information not available.
[   34.470881] Freeing unused kernel memory: 368k freed
[   34.483208] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   35.701000] fuse init (API version 7.9)
[   35.722314] ACPI: SSDT 5F684CB7, 019C (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
[   35.722529] ACPI: SSDT 5F684AD4, 015E (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
[   35.723210] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   35.723438] ACPI: SSDT 5F684E53, 007D (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
[   35.723635] ACPI: SSDT 5F684C32, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
[   35.724127] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[   36.111484] usbcore: registered new interface driver usbfs
[   36.111510] usbcore: registered new interface driver hub
[   36.111933] usbcore: registered new device driver usb
[   36.113297] USB Universal Host Controller Interface driver v3.0
[   36.113351] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[   36.113364] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   36.113368] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   36.113607] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   36.113641] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820
[   36.113778] usb usb1: configuration #1 chosen from 1 choice
[   36.113803] hub 1-0:1.0: USB hub found
[   36.113808] hub 1-0:1.0: 2 ports detected
[   36.214997] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
[   36.215010] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   36.215015] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   36.215039] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   36.215073] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001840
[   36.215201] usb usb2: configuration #1 chosen from 1 choice
[   36.215226] hub 2-0:1.0: USB hub found
[   36.215232] hub 2-0:1.0: 2 ports detected
[   36.229157] SCSI subsystem initialized
[   36.264852] libata version 3.00 loaded.
[   36.318849] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
[   36.318863] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   36.318867] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   36.318891] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   36.318925] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00001860
[   36.319042] usb usb3: configuration #1 chosen from 1 choice
[   36.319068] hub 3-0:1.0: USB hub found
[   36.319073] hub 3-0:1.0: 2 ports detected
[   36.422672] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 19
[   36.422685] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   36.422690] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   36.422713] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   36.422746] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[   36.422865] usb usb4: configuration #1 chosen from 1 choice
[   36.422889] hub 4-0:1.0: USB hub found
[   36.422894] hub 4-0:1.0: 2 ports detected
[   36.454531] usb 1-1: new full speed USB device using uhci_hcd and address 2
[   36.526628] r8169 Gigabit Ethernet driver 2.2LK loaded
[   36.526663] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 17
[   36.526685] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   36.527037] eth0: RTL8168b/8111b at 0xf8850000, 00:16:d4:1b:f7:58, XID 38000000 IRQ 220
[   36.528255] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[   36.528266] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   36.528270] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   36.528299] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   36.532219] ehci_hcd 0000:00:1d.7: debug port 1
[   36.532226] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   36.532233] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd0644000
[   36.582337] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   36.582459] usb usb5: configuration #1 chosen from 1 choice
[   36.582485] hub 5-0:1.0: USB hub found
[   36.582491] hub 5-0:1.0: 8 ports detected
[   36.686397] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 18
[   36.686439] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   36.686453] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[   36.690885] ata_piix 0000:00:1f.1: version 2.12
[   36.690900] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 18
[   36.690930] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   36.691004] scsi0 : ata_piix
[   36.691051] scsi1 : ata_piix
[   36.691591] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[   36.691594] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[   36.976744] usb 1-1: device not accepting address 2, error -71
[   37.017376] ata1.00: ATA-7: SAMSUNG HM080IC, YK100-13, max UDMA/100
[   37.017381] ata1.00: 156301488 sectors, multi 16: LBA48
[   37.017434] ata1.01: ATAPI: Slimtype DVDRW SSM-8515S, GSL1, max UDMA/33
[   37.025292] ata1.00: configured for UDMA/100
[   37.096561] Clocksource tsc unstable (delta = -18523166131 ns)
[   37.100626] Time: hpet clocksource has been installed.
[   37.107726] ata1.01: configured for UDMA/33
[   37.107811] ata2: port disabled. ignoring.
[   37.108008] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM080IC  YK10 PQ: 0 ANSI: 5
[   37.109660] scsi 0:0:1:0: CD-ROM            Slimtype DVDRW SSM-8515S  GSL1 PQ: 0 ANSI: 5
[   37.117030] Driver 'sd' needs updating - please use bus_type methods
[   37.117109] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   37.117122] sd 0:0:0:0: [sda] Write Protect is off
[   37.117124] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   37.117142] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   37.117197] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   37.117208] sd 0:0:0:0: [sda] Write Protect is off
[   37.117210] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   37.117227] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   37.117231]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   37.139174]  sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[   37.191036] sd 0:0:0:0: [sda] Attached SCSI disk
[   37.196538] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   37.196560] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   37.207263] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   37.207267] Uniform CD-ROM driver Revision: 3.20
[   37.207323] sr 0:0:1:0: Attached scsi CD-ROM sr0
[   37.718935] ReiserFS: sda1: found reiserfs format "3.6" with standard journal
[   37.718948] ReiserFS: sda1: using ordered data mode
[   37.734334] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   37.734631] ReiserFS: sda1: checking transaction log (sda1)
[   37.749405] usb 1-1: new full speed USB device using uhci_hcd and address 4
[   37.777517] ReiserFS: sda1: Using r5 hash to sort names
[   37.956871] usb 1-1: configuration #1 chosen from 1 choice
[   38.199692] usb 2-1: new full speed USB device using uhci_hcd and address 2
[   38.389781] usb 2-1: configuration #1 chosen from 1 choice
[   48.211348] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   48.356172] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   48.427607] Linux agpgart interface v0.102
[   48.550132] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   48.629928] agpgart: Detected an Intel 945GM Chipset.
[   48.630991] agpgart: Detected 7932K stolen memory.
[   48.646104] agpgart: AGP aperture is 256M @ 0xc0000000
[   48.745596] input: Power Button (FF) as /devices/virtual/input/input3
[   48.761644] ACPI: Power Button (FF) [PWRF]
[   48.761708] input: Lid Switch as /devices/virtual/input/input4
[   48.761769] ACPI: Lid Switch [LID0]
[   48.761821] input: Power Button (CM) as /devices/virtual/input/input5
[   48.785605] ACPI: Power Button (CM) [PWRB]
[   48.852821] iTCO_vendor_support: vendor-support=0
[   48.877632] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   48.997351] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
[   49.017253] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   49.017591] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
[   49.049194] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   49.054846] ACPI: AC Adapter [ACAD] (on-line)
[   49.288768] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   49.427632] ACPI: Battery Slot [BAT1] (battery present)
[   49.672602] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input8
[   49.701341] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   49.701380] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   50.238459] sdhci: Secure Digital Host Controller Interface driver
[   50.238464] sdhci: Copyright(c) Pierre Ossman
[   50.238506] sdhci: SDHCI controller found at 0000:06:04.2 [1524:0550] (rev 1)
[   50.238527] PCI: Enabling device 0000:06:04.2 (0000 -> 0002)
[   50.238533] ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 17 (level, low) -> IRQ 16
[   50.238592] mmc0: SDHCI at 0xd0001400 irq 16 PIO
[   50.238601] sdhci: SDHCI controller found at 0000:06:04.4 [1524:0551] (rev 1)
[   50.238618] PCI: Enabling device 0000:06:04.4 (0000 -> 0002)
[   50.238623] ACPI: PCI Interrupt 0000:06:04.4[B] -> GSI 17 (level, low) -> IRQ 16
[   50.238659] mmc1: SDHCI at 0xd0001100 irq 16 PIO
[   50.439716] r8169: eth0: link up
[   50.439728] r8169: eth0: link up
[   50.445717] Yenta: CardBus bridge found at 0000:06:04.0 [14c0:0020]
[   50.445744] Yenta: Using CSCINT to route CSC interrupts to PCI
[   50.445746] Yenta: Routing CardBus interrupts to PCI
[   50.445753] Yenta TI: socket 0000:06:04.0, mfunc 0x88501212, devctl 0x44
[   50.582853] intel_rng: FWH not detected
[   50.626067] Bluetooth: Core ver 2.11
[   50.641566] NET: Registered protocol family 31
[   50.641570] Bluetooth: HCI device and connection manager initialized
[   50.641574] Bluetooth: HCI socket layer initialized
[   50.642390] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26k
[   50.642394] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[   50.675445] Yenta: ISA IRQ mask 0x0cf8, PCI irq 19
[   50.675450] Socket status: 30000006
[   50.675453] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[   50.675458] pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd00fffff
[   50.675534] Bluetooth: HCI USB driver ver 2.9
[   50.676842] usbcore: registered new interface driver hci_usb
[   50.686995] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 19
[   50.687013] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   50.687036] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[   50.758794] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[   50.760050] phy0: Selected rate control algorithm 'iwl-3945-rs'
[   50.931019] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[   50.931049] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   50.965001] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   51.163032] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[   51.313978] NET: Registered protocol family 10
[   51.314236] lo: Disabled Privacy Extensions
[   51.421625] cs: IO port probe 0x100-0x3af: clean.
[   51.423670] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   51.424528] cs: IO port probe 0x820-0x8ff: clean.
[   51.425252] cs: IO port probe 0xc00-0xcf7: clean.
[   51.426154] cs: IO port probe 0xa00-0xaff: clean.
[   51.612334] lp: driver loaded but no devices found
[   51.794928] Adding 2931820k swap on /dev/sda7.  Priority:-1 extents:1 across:2931820k
[   56.293168] eth0: no IPv6 routers present
[   56.827382] ReiserFS: sda2: found reiserfs format "3.6" with standard journal
[   56.827392] ReiserFS: sda2: using ordered data mode
[   56.834632] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   56.834887] ReiserFS: sda2: checking transaction log (sda2)
[   56.867867] ReiserFS: sda2: Using r5 hash to sort names
[   57.403588] ip_tables: (C) 2000-2006 Netfilter Core Team
[   57.814491] No dock devices found.
[   59.573821] apm: BIOS not found.
[   59.690066] ppdev: user-space parallel port driver
[   60.018104] audit(1216891790.246:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5363 profile="/usr/sbin/cupsd" namespace="default"
[   63.313767] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 19
[   63.313907] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100002, writing 100006)
[   63.502518] Bluetooth: L2CAP ver 2.9
[   63.502524] Bluetooth: L2CAP socket layer initialized
[   63.513803] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   63.621973] Bluetooth: RFCOMM socket layer initialized
[   63.621991] Bluetooth: RFCOMM TTY layer initialized
[   63.621994] Bluetooth: RFCOMM ver 1.8
[   66.433554] [drm] Initialized drm 1.1.0 20060810
[   66.439622] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 19
[   66.439631] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   66.439687] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   76.031805] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   76.032562] input: Bluetooth Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/hci0/acl0012A1608198/input/input9
[   87.977260] CPU0 attaching NULL sched-domain.
[   87.977269] CPU1 attaching NULL sched-domain.
[   88.005053] CPU0 attaching sched-domain:
[   88.005062]  domain 0: span 03
[   88.005065]   groups: 01 02
[   88.005071] CPU1 attaching sched-domain:
[   88.005074]  domain 0: span 03
[   88.005076]   groups: 02 01



On äkki kellegil mõistliku nõu anda?
Leidsin vikist õpetuse sama masina kohta, aga seal ei olnud ka kaardilugejast suurt juttu.


sander85
Vana Pingviin
Vana Pingviin


Vanus: 38
Liitunud: 08.08.2005
Postitused: 4359
Asukoht: Tallinn (vahel ka Virtsu)
Distributsioon: Mageia, Debian, CentOS
estonia.gif
postituspostitatud: 24.07.2008, 17:33  postituse pealkiri:  (teema puudub)  

saaks dmesg väljundi ainult selle kohta, mis siis juhtub kui kaart pessa panna või siis kui kaart pesast eemaldada, kas siis üldse midagi juhtub?

_________________
Image Image Image

Kaar3l
Vana Pingviin
Vana Pingviin


Vanus: 36
Liitunud: 07.05.2007
Postitused: 692
Asukoht: Plv
Distributsioon: Ubuntu
estonia.gif
postituspostitatud: 24.07.2008, 20:00  postituse pealkiri:  (teema puudub)  

Sama masin sama jama ka siinpool. Olen proovinud SD kaarte, need on töötanud mingite kerneli versioonidega, küll pole kahjuks saanud selle versiooniga testida. MS-id aga pole töötanud. Kahjuks pole ühtegi kaarti millega testida ka.

_________________
Hyva päiva!

julla
Pingviini kasutaja
Pingviini kasutaja



Liitunud: 19.02.2008
Postitused: 73

Distributsioon: Ubuntu
estonia.gif
postituspostitatud: 25.07.2008, 08:05  postituse pealkiri:  (teema puudub)  

Kui kaardi sisestan või eemaldan ei juhtu mitte midagi. Käsk dmesg vähemalt ei näita.
Alates kerneli versioonist 2.6.24 peaks antud kaardilugeja toetatud olema vaike seadetes.


kiirtee
Pingviini aktivist
Pingviini aktivist


Vanus: 40
Liitunud: 25.04.2007
Postitused: 382
Asukoht: Tallinn
Distributsioon: Estobuntu 8.09
estonia.gif
postituspostitatud: 25.07.2008, 13:55  postituse pealkiri:  (teema puudub)  

Olen tihti kasutanud neid A-data class6 sd kaarte ja need samused täätavad ainult õnne kombel atf-st ostetud sisese 26in mälukaardilugejaga. Enamikes kaardilugejates pole see töötanud olenamata operatsiooni süsteemist.


Näita (aja järgi):      
Postita uus teemaVasta teemale


Vaata järgmist teemat
Vaata eelmist teemat
Powered by phpBB2 Plus based on phpBB © 2001/7 phpBB Group