Portaal Portaal Pingviini veeb foorumi pealeht
  Viki  |  IRC  |  Otsing  |  Küsimused ja vastused  |  Profiil  |  Privaatsõnumite vaatamiseks logi sisse  | Logi sisse või Registreeru
<empty>
Vaata järgmist teemat
Vaata eelmist teemat

Postita uus teemaVasta teemale
Autor Sõnum
pacho
Moderaator
Moderaator


Vanus: 42
Liitunud: 08.07.2005
Postitused: 618

Distributsioon: Debian GNU/Linux
blank.gif
postituspostitatud: 03.05.2007, 20:17  postituse pealkiri:  (teema puudub)  

alar68 kirjutas:
a68@a68-laptop:~$ cat /proc/asound
cat: /proc/asound: Is a directory

cat /proc/asound/* ikka Embarassed

ag see pole vist ka enam tähtis.

Ava oma lemmik redaktoriga fail /etc/modprobe.d/alsa-base
Tsitaat:
sudo gedit /etc/modprobe.d/alsa-base

Lisa faili lõppu rida
Tsitaat:
options snd-hda-intel model=asus


Ja kindlasti ka üks tühi rida ka faili lõppu.
Pärast restarti hakkab ehk tööle.

_________________
http://blog.pacho.pri.ee/

alar68
Pingviini aktivist
Pingviini aktivist


Vanus: 55
Liitunud: 02.05.2007
Postitused: 213

Distributsioon: Linux Mint 13 Cinnamon 64bit
estonia.gif
postituspostitatud: 03.05.2007, 20:49  postituse pealkiri:  (teema puudub)  

aitäh, Pacho.käima läks

_________________
Julgen näidata ennast rumalana.

Parnakas
Pingviini kasutaja
Pingviini kasutaja


Vanus: 44
Liitunud: 04.05.2007
Postitused: 45
Asukoht: Tallinn/Väike-Maarja
Distributsioon: Ubuntu 14.04
estonia.gif
postituspostitatud: 04.05.2007, 22:05  postituse pealkiri:  (teema puudub)  

Tere mul sama jama, et heli pole, tegin ka lspci, dmesg ja lsmod. Siin on tulemused, mida edasi teha?

root@koduarvuti:/home/koduarvuti# lspci
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0d.0 VGA compatible controller: nVidia Corporation GeForce 6100 nForce 430 (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control

root@koduarvuti:/home/koduarvuti# dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] Command line: root=UUID=f0c70de5-2503-4d3e-8cb2-54e8954bf090 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000037fc0000 (usable)
[ 0.000000] BIOS-e820: 0000000037fc0000 - 0000000037fce000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000037fce000 - 0000000037ff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000037ff0000 - 0000000038000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 229312) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FB810 checksum 0
[ 0.000000] ACPI: RSDP 000FB810, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 37FC0000, 0038 (r1 A_M_I_ OEMRSDT 4000718 MSFT 97)
[ 0.000000] ACPI: FACP 37FC0200, 0084 (r2 A_M_I_ OEMFACP 4000718 MSFT 97)
[ 0.000000] ACPI: DSDT 37FC0440, 6768 (r1 A0785 A0785000 0 INTL 2002026)
[ 0.000000] ACPI: FACS 37FCE000, 0040
[ 0.000000] ACPI: APIC 37FC0390, 0070 (r1 A_M_I_ OEMAPIC 4000718 MSFT 97)
[ 0.000000] ACPI: MCFG 37FC0400, 003C (r1 A_M_I_ OEMMCFG 4000718 MSFT 97)
[ 0.000000] ACPI: OEMB 37FCE040, 0060 (r1 A_M_I_ AMI_OEM 4000718 MSFT 97)
[ 0.000000] ACPI: HPET 37FC6BB0, 0038 (r1 A_M_I_ OEMHPET0 4000718 MSFT 97)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000037fc0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 229312) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000037fc0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 229312
[ 0.000000] On node 0 totalpages: 229215
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1124 pages reserved
[ 0.000000] DMA zone: 2819 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3079 pages used for memmap
[ 0.000000] DMA32 zone: 222137 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 38000000:c6c00000)
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 224956
[ 0.000000] Kernel command line: root=UUID=f0c70de5-2503-4d3e-8cb2-54e8954bf090 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 18.198737] time.c: Detected 2009.110 MHz processor.
[ 18.201650] Console: colour VGA+ 80x25
[ 18.201665] Checking aperture...
[ 18.201669] CPU 0: aperture @ 853e000000 size 32 MB
[ 18.201671] Aperture too small (32 MB)
[ 18.207561] No AGP bridge found
[ 18.217465] Memory: 892384k/917248k available (2274k kernel code, 24476k reserved, 1181k data, 296k init)
[ 18.217513] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 18.296832] Calibrating delay using timer specific routine.. 4022.11 BogoMIPS (lpj=8044232)
[ 18.296862] Security Framework v1.0.0 initialized
[ 18.296869] SELinux: Disabled at boot.
[ 18.296958] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 18.297582] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 18.297857] Mount-cache hash table entries: 256
[ 18.297996] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 18.297998] CPU: L2 Cache: 512K (64 bytes/line)
[ 18.298001] CPU 0/0 -> Node 0
[ 18.298021] SMP alternatives: switching to UP code
[ 18.298299] Early unpacking initramfs... done
[ 18.589869] ACPI: Core revision 20070126
[ 18.589926] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 18.633218] Using local APIC timer interrupts.
[ 18.682928] result 12556934
[ 18.682929] Detected 12.556 MHz APIC timer.
[ 18.684341] Brought up 1 CPUs
[ 18.684553] NET: Registered protocol family 16
[ 18.684629] ACPI: bus type pci registered
[ 18.684634] PCI: Using configuration type 1
[ 18.688321] ACPI: EC: Look up EC in DSDT
[ 18.694223] ACPI: Interpreter enabled
[ 18.694226] ACPI: (supports S0 S1 S3 S4 S5)
[ 18.694242] ACPI: Using IOAPIC for interrupt routing
[ 18.704252] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 18.704260] PCI: Probing PCI hardware (bus 00)
[ 18.704752] PCI: Transparent bridge - 0000:00:04.0
[ 18.704936] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 18.705136] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 18.705261] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 18.705357] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 18.705453] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 18.712664] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 18.712880] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 18.713094] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 18.713306] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 18.713519] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 18.713731] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 18.713944] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 18.714156] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 18.714374] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
[ 18.714587] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[ 18.714804] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[ 18.715017] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 18.715229] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 18.715442] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *11
[ 18.715682] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 18.715918] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 18.716130] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[ 18.716356] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[ 18.716609] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 18.716691] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 18.716699] pnp: PnP ACPI init
[ 18.716709] ACPI: bus type pnp registered
[ 18.722974] pnp: PnP ACPI: found 16 devices
[ 18.722977] ACPI: ACPI bus type pnp unregistered
[ 18.723027] PCI: Using ACPI for IRQ routing
[ 18.723030] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 18.723086] NET: Registered protocol family 8
[ 18.723088] NET: Registered protocol family 20
[ 18.723150] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 18.723154] hpet0: 3 32-bit timers, 25000000 Hz
[ 18.724207] pnp: 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 18.724211] pnp: 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
[ 18.724214] pnp: 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
[ 18.724217] pnp: 00:07: iomem range 0xffb80000-0xffffffff could not be reserved
[ 18.724223] pnp: 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 18.724226] pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 18.724229] pnp: 00:09: iomem range 0x38000000-0x3fffffff has been reserved
[ 18.724235] pnp: 00:0c: ioport range 0x230-0x23f has been reserved
[ 18.724237] pnp: 00:0c: ioport range 0x290-0x29f has been reserved
[ 18.724240] pnp: 00:0c: ioport range 0xa00-0xa0f has been reserved
[ 18.724243] pnp: 00:0c: ioport range 0xa10-0xa1f has been reserved
[ 18.724248] pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 18.724253] pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 18.724259] Time: tsc clocksource has been installed.
[ 18.724266] pnp: 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 18.724269] pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 18.724272] pnp: 00:0f: iomem range 0x100000-0x37ffffff could not be reserved
[ 18.724512] PCI: Bridge: 0000:00:04.0
[ 18.724513] IO window: disabled.
[ 18.724516] MEM window: disabled.
[ 18.724518] PREFETCH window: disabled.
[ 18.724521] PCI: Bridge: 0000:00:09.0
[ 18.724523] IO window: disabled.
[ 18.724525] MEM window: disabled.
[ 18.724526] PREFETCH window: disabled.
[ 18.724529] PCI: Bridge: 0000:00:0b.0
[ 18.724530] IO window: disabled.
[ 18.724532] MEM window: disabled.
[ 18.724534] PREFETCH window: disabled.
[ 18.724536] PCI: Bridge: 0000:00:0c.0
[ 18.724537] IO window: disabled.
[ 18.724539] MEM window: disabled.
[ 18.724541] PREFETCH window: disabled.
[ 18.724550] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 18.724557] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 18.724562] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 18.724567] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 18.724614] NET: Registered protocol family 2
[ 18.764255] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 18.764589] TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
[ 18.766797] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 18.767447] TCP: Hash tables configured (established 131072 bind 65536)
[ 18.767451] TCP reno registered
[ 18.776302] checking if image is initramfs... it is
[ 19.344734] Freeing initrd memory: 7266k freed
[ 19.349999] audit: initializing netlink socket (disabled)
[ 19.350009] audit(1193468405.112:1): initialized
[ 19.351695] VFS: Disk quotas dquot_6.5.1
[ 19.351745] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 19.351832] io scheduler noop registered
[ 19.351834] io scheduler anticipatory registered
[ 19.351835] io scheduler deadline registered
[ 19.351914] io scheduler cfq registered (default)
[ 19.791026] Boot video device is 0000:00:0d.0
[ 19.791141] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 19.791159] assign_interrupt_mode Found MSI capability
[ 19.791162] Allocate Port Service[0000:00:09.0:pcie00]
[ 19.791213] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 19.791231] assign_interrupt_mode Found MSI capability
[ 19.791233] Allocate Port Service[0000:00:0b.0:pcie00]
[ 19.791278] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 19.791295] assign_interrupt_mode Found MSI capability
[ 19.791298] Allocate Port Service[0000:00:0c.0:pcie00]
[ 19.811989] Real Time Clock Driver v1.12ac
[ 19.812152] hpet_resources: 0xfed00000 is busy
[ 19.812180] Linux agpgart interface v0.102 (c) Dave Jones
[ 19.812183] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 19.812272] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 19.812898] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 19.813473] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 19.813645] input: Macintosh mouse button emulation as /class/input/input0
[ 19.813710] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 19.814048] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 19.814052] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 19.814182] mice: PS/2 mouse device common for all mice
[ 19.814352] TCP cubic registered
[ 19.814412] NET: Registered protocol family 1
[ 19.814587] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 19.814594] Freeing unused kernel memory: 296k freed
[ 20.983491] AppArmor: AppArmor initialized<5>audit(1193468406.752:2): type=1505 info="AppArmor initialized" pid=1221
[ 20.988483] fuse init (API version 7.Cool
[ 20.992323] Failure registering capabilities with primary security module.
[ 21.004655] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 21.511533] usbcore: registered new interface driver usbfs
[ 21.511558] usbcore: registered new interface driver hub
[ 21.511576] usbcore: registered new device driver usb
[ 21.512213] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 21.512589] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 21.512599] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 21.512693] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 21.512700] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 21.512836] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 21.512855] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdffff000
[ 21.554655] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 21.554660] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 21.557919] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[ 21.602550] usb usb1: configuration #1 chosen from 1 choice
[ 21.602575] hub 1-0:1.0: USB hub found
[ 21.602584] hub 1-0:1.0: 8 ports detected
[ 21.614163] SCSI subsystem initialized
[ 21.619022] libata version 2.21 loaded.
[ 21.663915] Floppy drive(s): fd0 is 1.44M
[ 21.708787] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 21.708797] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 21.708911] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 21.708918] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 21.708969] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 21.708996] ehci_hcd 0000:00:02.1: debug port 1
[ 21.709000] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 21.709011] ehci_hcd 0000:00:02.1: irq 22, io mem 0xdfffec00
[ 21.709018] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.709094] usb usb2: configuration #1 chosen from 1 choice
[ 21.709117] hub 2-0:1.0: USB hub found
[ 21.709123] hub 2-0:1.0: 8 ports detected
[ 21.733098] FDC 0 is a post-1991 82077
[ 21.816529] NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0
[ 21.816548] NFORCE-MCP61: chipset revision 162
[ 21.816550] NFORCE-MCP61: not 100% native mode: will probe irqs later
[ 21.816554] NFORCE-MCP61: BIOS didn't set cable bits correctly. Enabling workaround.
[ 21.816558] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
[ 21.816566] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[ 21.816574] Probing IDE interface ide0...
[ 22.219643] hda: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive
[ 22.419282] usb 1-3: new full speed USB device using ohci_hcd and address 2
[ 22.503262] hdb: ST380011A, ATA DISK drive
[ 22.563961] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 22.570609] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[ 22.570621] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 21
[ 22.570626] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 22.570635] forcedeth: using HIGHDMA
[ 22.584267] hda: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 22.584275] Uniform CD-ROM driver Revision: 3.20
[ 22.592675] hdb: max request size: 512KiB
[ 22.593143] hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[ 22.593412] hdb: cache flushes supported
[ 22.593443] hdb: hdb1 hdb2 <<6>usb 1-3: configuration #1 chosen from 1 choice
[ 22.656459] usbcore: registered new interface driver hiddev
[ 22.668234] input: Hewlett-Packard Company HP USB Smart Card Keyboard as /class/input/input1
[ 22.668244] input: USB HID v1.11 Keyboard [Hewlett-Packard Company HP USB Smart Card Keyboard] on usb-0000:00:02.0-3
[ 22.668258] usbcore: registered new interface driver usbhid
[ 22.668262] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 22.668386] hdb5 >
[ 23.008667] kjournald starting. Commit interval 5 seconds
[ 23.008676] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.094681] eth0: forcedeth.c: subsystem: 01043:8234 bound to 0000:00:07.0
[ 23.094797] sata_nv 0000:00:08.0: version 3.4
[ 23.095138] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 23.095147] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 20
[ 23.095285] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 23.095406] scsi0 : sata_nv
[ 23.095450] scsi1 : sata_nv
[ 23.095505] ata1: SATA max UDMA/133 cmd 0x000000000001e400 ctl 0x000000000001e082 bmdma 0x000000000001d880 irq 20
[ 23.095509] ata2: SATA max UDMA/133 cmd 0x000000000001e000 ctl 0x000000000001dc02 bmdma 0x000000000001d888 irq 20
[ 23.409944] ata1: SATA link down (SStatus 0 SControl 300)
[ 23.733512] ata2: SATA link down (SStatus 0 SControl 300)
[ 31.746026] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
[ 31.746052] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
[ 31.977782] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 32.006277] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.304035] input: PC Speaker as /class/input/input2
[ 32.881814] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[ 32.881819] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [LAZA] -> GSI 23 (level, low) -> IRQ 23
[ 32.881945] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 33.092699] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
[ 33.235086] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[ 33.237749] parport_pc 00:06: reported by Plug and Play ACPI
[ 33.237795] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 33.708527] lp0: using parport0 (interrupt-driven).
[ 33.812245] Adding 2626588k swap on /dev/hdb5. Priority:-1 extents:1 across:2626588k
[ 34.076058] EXT3 FS on hdb1, internal journal
[ 35.162462] No dock devices found.
[ 35.216059] input: Power Button (FF) as /class/input/input4
[ 35.219895] ACPI: Power Button (FF) [PWRF]
[ 35.247230] input: Power Button (CM) as /class/input/input5
[ 35.251080] ACPI: Power Button (CM) [PWRB]
[ 35.431089] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00)
[ 35.447234] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[ 38.953366] ppdev: user-space parallel port driver
[ 39.543395] audit(1193468426.080:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4887 profile="/usr/sbin/cupsd"
[ 39.837516] Failure registering capabilities with primary security module.
[ 40.260133] NET: Registered protocol family 10
[ 40.260267] lo: Disabled Privacy Extensions
[ 44.646516] NET: Registered protocol family 17
[ 59.037077] eth0: no IPv6 routers present

root@koduarvuti:/home/koduarvuti# lsmod
Module Size Used by
af_packet 28172 2
binfmt_misc 14860 1
ipv6 317192 16
ppdev 11272 0
cpufreq_ondemand 10896 0
cpufreq_conservative 9608 0
cpufreq_userspace 6048 0
cpufreq_powersave 3072 0
cpufreq_stats 8160 0
freq_table 6464 2 cpufreq_ondemand,cpufreq_stats
video 21140 0
button 10400 0
dock 12264 0
sbs 21520 0
container 6400 0
ac 7304 0
battery 12424 0
lp 15048 0
snd_hda_intel 337192 1
snd_pcm_oss 50048 0
snd_pcm 94344 2 snd_hda_intel,snd_pcm_oss
snd_mixer_oss 20096 1 snd_pcm_oss
snd_seq_dummy 5380 0
snd_seq_oss 36864 0
snd_seq_midi 11008 0
snd_rawmidi 29824 1 snd_seq_midi
snd_seq_midi_event 9984 2 snd_seq_oss,snd_seq_midi
snd_seq 62496 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 27272 2 snd_pcm,snd_seq
snd_seq_device 10260 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
parport_pc 41896 1
parport 44172 3 ppdev,lp,parport_pc
k8temp 7680 0
psmouse 45596 0
snd 69288 11 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
pcspkr 4608 0
serio_raw 9092 0
soundcore 10272 1 snd
snd_page_alloc 12560 2 snd_hda_intel,snd_pcm
shpchp 38300 0
pci_hotplug 36612 1 shpchp
i2c_nforce2 7808 0
i2c_core 30208 1 i2c_nforce2
evdev 13056 3
ext3 146576 1
jbd 69360 1 ext3
mbcache 11272 1 ext3
usbhid 32576 0
hid 33408 1 usbhid
ide_disk 20352 3
ide_cd 35488 0
cdrom 41768 1 ide_cd
ata_generic 9988 0
floppy 69608 0
sata_nv 24068 0
libata 138928 2 ata_generic,sata_nv
scsi_mod 172856 1 libata
forcedeth 55048 0
amd74xx 17328 0 [permanent]
ide_core 141200 3 ide_disk,ide_cd,amd74xx
ehci_hcd 40076 0
ohci_hcd 25092 0
usbcore 161584 4 usbhid,ehci_hcd,ohci_hcd
thermal 16528 0
processor 36232 1 thermal
fan 6920 0
fuse 52528 1
apparmor 47008 0
commoncap 9472 1 apparmor




Viimati muutis Parnakas 27.10.2007, 09:09; muudetud 2 korda
pacho
Moderaator
Moderaator


Vanus: 42
Liitunud: 08.07.2005
Postitused: 618

Distributsioon: Debian GNU/Linux
blank.gif
postituspostitatud: 05.05.2007, 07:14  postituse pealkiri:  (teema puudub)  

Kumba heli kasutad?

_________________
http://blog.pacho.pri.ee/

Parnakas
Pingviini kasutaja
Pingviini kasutaja


Vanus: 44
Liitunud: 04.05.2007
Postitused: 45
Asukoht: Tallinn/Väike-Maarja
Distributsioon: Ubuntu 14.04
estonia.gif
postituspostitatud: 07.05.2007, 11:07  postituse pealkiri:  (teema puudub)  

olen mõlemat proovinud, aga heli ei kusagil?


pacho
Moderaator
Moderaator


Vanus: 42
Liitunud: 08.07.2005
Postitused: 618

Distributsioon: Debian GNU/Linux
blank.gif
postituspostitatud: 07.05.2007, 13:44  postituse pealkiri:  (teema puudub)  

Võib-olla võtaks korraga ühe veaotsimise ette.
Lülita integreeritud heli välja ja kontrolli, et heli poelks vaigistatud

_________________
http://blog.pacho.pri.ee/

Parnakas
Pingviini kasutaja
Pingviini kasutaja


Vanus: 44
Liitunud: 04.05.2007
Postitused: 45
Asukoht: Tallinn/Väike-Maarja
Distributsioon: Ubuntu 14.04
estonia.gif
postituspostitatud: 27.10.2007, 09:14  postituse pealkiri:  (teema puudub)  

uuendasin vahepeal versiooni 7.04-t 7.10ks.

lspci, dmesg ja lsmod käskudele sain vastused, mis uuendasin eelmises postituses.

Kuidas saan integreeritud heli välja lülitada.

PS! Värk selline, et näiteks Skype-s ei kuule ma helinat ja mic ei tööta, aga samas testkõne juttu kuulen.

Heli eelistuste all on kõik ALSA ja seade on HDA NVidia (Alsa mixer).

Ettepanekud?


Parnakas
Pingviini kasutaja
Pingviini kasutaja


Vanus: 44
Liitunud: 04.05.2007
Postitused: 45
Asukoht: Tallinn/Väike-Maarja
Distributsioon: Ubuntu 14.04
estonia.gif
postituspostitatud: 27.10.2007, 09:16  postituse pealkiri:  (teema puudub)  

root@koduarvuti:/home/koduarvuti# cat /proc/asound/card0/codec#0 | grep Codec
Codec: Realtek ALC662 rev1


Näita (aja järgi):      
Postita uus teemaVasta teemale


Vaata järgmist teemat
Vaata eelmist teemat
Powered by phpBB2 Plus based on phpBB © 2001/7 phpBB Group