| Autor |
Sõnum |
pacho
Moderaator
Vanus: 44
Liitunud: 08.07.2005
Postitused: 618
Distributsioon: Debian GNU/Linux
|
|
| alar68 kirjutas: | | a68@a68-laptop:~$ cat /proc/asound
cat: /proc/asound: Is a directory |
cat /proc/asound/* ikka 
ag see pole vist ka enam tähtis.
Ava oma lemmik redaktoriga fail /etc/modprobe.d/alsa-base
| Tsitaat: | | sudo gedit /etc/modprobe.d/alsa-base |
Lisa faili lõppu rida
| Tsitaat: | | options snd-hda-intel model=asus |
Ja kindlasti ka üks tühi rida ka faili lõppu.
Pärast restarti hakkab ehk tööle.
|
|
|
|
_________________
http://blog.pacho.pri.ee/
|
|
|
   |
alar68
Pingviini aktivist
Vanus: 57
Liitunud: 02.05.2007
Postitused: 213
Distributsioon: Linux Mint 13 Cinnamon 64bit
|
|
|
_________________
Julgen näidata ennast rumalana.
|
|
|
|
Parnakas
Pingviini kasutaja
Vanus: 46
Liitunud: 04.05.2007
Postitused: 45
Asukoht: Tallinn/Väike-Maarja
Distributsioon: Ubuntu 14.04
|
|
Tere mul sama jama, et heli pole, tegin ka lspci, dmesg ja lsmod. Siin on tulemused, mida edasi teha?
root@koduarvuti:/home/koduarvuti# lspci
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2)
00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
00:0d.0 VGA compatible controller: nVidia Corporation GeForce 6100 nForce 430 (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
root@koduarvuti:/home/koduarvuti# dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] Command line: root=UUID=f0c70de5-2503-4d3e-8cb2-54e8954bf090 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000037fc0000 (usable)
[ 0.000000] BIOS-e820: 0000000037fc0000 - 0000000037fce000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000037fce000 - 0000000037ff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000037ff0000 - 0000000038000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 229312) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FB810 checksum 0
[ 0.000000] ACPI: RSDP 000FB810, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 37FC0000, 0038 (r1 A_M_I_ OEMRSDT 4000718 MSFT 97)
[ 0.000000] ACPI: FACP 37FC0200, 0084 (r2 A_M_I_ OEMFACP 4000718 MSFT 97)
[ 0.000000] ACPI: DSDT 37FC0440, 6768 (r1 A0785 A0785000 0 INTL 2002026)
[ 0.000000] ACPI: FACS 37FCE000, 0040
[ 0.000000] ACPI: APIC 37FC0390, 0070 (r1 A_M_I_ OEMAPIC 4000718 MSFT 97)
[ 0.000000] ACPI: MCFG 37FC0400, 003C (r1 A_M_I_ OEMMCFG 4000718 MSFT 97)
[ 0.000000] ACPI: OEMB 37FCE040, 0060 (r1 A_M_I_ AMI_OEM 4000718 MSFT 97)
[ 0.000000] ACPI: HPET 37FC6BB0, 0038 (r1 A_M_I_ OEMHPET0 4000718 MSFT 97)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000037fc0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 229312) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000037fc0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 229312
[ 0.000000] On node 0 totalpages: 229215
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1124 pages reserved
[ 0.000000] DMA zone: 2819 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3079 pages used for memmap
[ 0.000000] DMA32 zone: 222137 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 38000000:c6c00000)
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 224956
[ 0.000000] Kernel command line: root=UUID=f0c70de5-2503-4d3e-8cb2-54e8954bf090 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 18.198737] time.c: Detected 2009.110 MHz processor.
[ 18.201650] Console: colour VGA+ 80x25
[ 18.201665] Checking aperture...
[ 18.201669] CPU 0: aperture @ 853e000000 size 32 MB
[ 18.201671] Aperture too small (32 MB)
[ 18.207561] No AGP bridge found
[ 18.217465] Memory: 892384k/917248k available (2274k kernel code, 24476k reserved, 1181k data, 296k init)
[ 18.217513] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 18.296832] Calibrating delay using timer specific routine.. 4022.11 BogoMIPS (lpj=8044232)
[ 18.296862] Security Framework v1.0.0 initialized
[ 18.296869] SELinux: Disabled at boot.
[ 18.296958] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 18.297582] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 18.297857] Mount-cache hash table entries: 256
[ 18.297996] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 18.297998] CPU: L2 Cache: 512K (64 bytes/line)
[ 18.298001] CPU 0/0 -> Node 0
[ 18.298021] SMP alternatives: switching to UP code
[ 18.298299] Early unpacking initramfs... done
[ 18.589869] ACPI: Core revision 20070126
[ 18.589926] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 18.633218] Using local APIC timer interrupts.
[ 18.682928] result 12556934
[ 18.682929] Detected 12.556 MHz APIC timer.
[ 18.684341] Brought up 1 CPUs
[ 18.684553] NET: Registered protocol family 16
[ 18.684629] ACPI: bus type pci registered
[ 18.684634] PCI: Using configuration type 1
[ 18.688321] ACPI: EC: Look up EC in DSDT
[ 18.694223] ACPI: Interpreter enabled
[ 18.694226] ACPI: (supports S0 S1 S3 S4 S5)
[ 18.694242] ACPI: Using IOAPIC for interrupt routing
[ 18.704252] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 18.704260] PCI: Probing PCI hardware (bus 00)
[ 18.704752] PCI: Transparent bridge - 0000:00:04.0
[ 18.704936] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 18.705136] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 18.705261] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 18.705357] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 18.705453] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 18.712664] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 18.712880] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 18.713094] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 18.713306] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 18.713519] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 18.713731] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 18.713944] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 18.714156] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 18.714374] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
[ 18.714587] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[ 18.714804] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[ 18.715017] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 18.715229] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 18.715442] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *11
[ 18.715682] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 18.715918] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 18.716130] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[ 18.716356] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[ 18.716609] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 18.716691] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 18.716699] pnp: PnP ACPI init
[ 18.716709] ACPI: bus type pnp registered
[ 18.722974] pnp: PnP ACPI: found 16 devices
[ 18.722977] ACPI: ACPI bus type pnp unregistered
[ 18.723027] PCI: Using ACPI for IRQ routing
[ 18.723030] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 18.723086] NET: Registered protocol family 8
[ 18.723088] NET: Registered protocol family 20
[ 18.723150] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 18.723154] hpet0: 3 32-bit timers, 25000000 Hz
[ 18.724207] pnp: 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 18.724211] pnp: 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
[ 18.724214] pnp: 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
[ 18.724217] pnp: 00:07: iomem range 0xffb80000-0xffffffff could not be reserved
[ 18.724223] pnp: 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 18.724226] pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 18.724229] pnp: 00:09: iomem range 0x38000000-0x3fffffff has been reserved
[ 18.724235] pnp: 00:0c: ioport range 0x230-0x23f has been reserved
[ 18.724237] pnp: 00:0c: ioport range 0x290-0x29f has been reserved
[ 18.724240] pnp: 00:0c: ioport range 0xa00-0xa0f has been reserved
[ 18.724243] pnp: 00:0c: ioport range 0xa10-0xa1f has been reserved
[ 18.724248] pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 18.724253] pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 18.724259] Time: tsc clocksource has been installed.
[ 18.724266] pnp: 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 18.724269] pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 18.724272] pnp: 00:0f: iomem range 0x100000-0x37ffffff could not be reserved
[ 18.724512] PCI: Bridge: 0000:00:04.0
[ 18.724513] IO window: disabled.
[ 18.724516] MEM window: disabled.
[ 18.724518] PREFETCH window: disabled.
[ 18.724521] PCI: Bridge: 0000:00:09.0
[ 18.724523] IO window: disabled.
[ 18.724525] MEM window: disabled.
[ 18.724526] PREFETCH window: disabled.
[ 18.724529] PCI: Bridge: 0000:00:0b.0
[ 18.724530] IO window: disabled.
[ 18.724532] MEM window: disabled.
[ 18.724534] PREFETCH window: disabled.
[ 18.724536] PCI: Bridge: 0000:00:0c.0
[ 18.724537] IO window: disabled.
[ 18.724539] MEM window: disabled.
[ 18.724541] PREFETCH window: disabled.
[ 18.724550] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 18.724557] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 18.724562] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 18.724567] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 18.724614] NET: Registered protocol family 2
[ 18.764255] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 18.764589] TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
[ 18.766797] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 18.767447] TCP: Hash tables configured (established 131072 bind 65536)
[ 18.767451] TCP reno registered
[ 18.776302] checking if image is initramfs... it is
[ 19.344734] Freeing initrd memory: 7266k freed
[ 19.349999] audit: initializing netlink socket (disabled)
[ 19.350009] audit(1193468405.112:1): initialized
[ 19.351695] VFS: Disk quotas dquot_6.5.1
[ 19.351745] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 19.351832] io scheduler noop registered
[ 19.351834] io scheduler anticipatory registered
[ 19.351835] io scheduler deadline registered
[ 19.351914] io scheduler cfq registered (default)
[ 19.791026] Boot video device is 0000:00:0d.0
[ 19.791141] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 19.791159] assign_interrupt_mode Found MSI capability
[ 19.791162] Allocate Port Service[0000:00:09.0:pcie00]
[ 19.791213] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 19.791231] assign_interrupt_mode Found MSI capability
[ 19.791233] Allocate Port Service[0000:00:0b.0:pcie00]
[ 19.791278] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 19.791295] assign_interrupt_mode Found MSI capability
[ 19.791298] Allocate Port Service[0000:00:0c.0:pcie00]
[ 19.811989] Real Time Clock Driver v1.12ac
[ 19.812152] hpet_resources: 0xfed00000 is busy
[ 19.812180] Linux agpgart interface v0.102 (c) Dave Jones
[ 19.812183] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 19.812272] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 19.812898] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 19.813473] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 19.813645] input: Macintosh mouse button emulation as /class/input/input0
[ 19.813710] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 19.814048] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 19.814052] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 19.814182] mice: PS/2 mouse device common for all mice
[ 19.814352] TCP cubic registered
[ 19.814412] NET: Registered protocol family 1
[ 19.814587] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 19.814594] Freeing unused kernel memory: 296k freed
[ 20.983491] AppArmor: AppArmor initialized<5>audit(1193468406.752:2): type=1505 info="AppArmor initialized" pid=1221
[ 20.988483] fuse init (API version 7.
[ 20.992323] Failure registering capabilities with primary security module.
[ 21.004655] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 21.511533] usbcore: registered new interface driver usbfs
[ 21.511558] usbcore: registered new interface driver hub
[ 21.511576] usbcore: registered new device driver usb
[ 21.512213] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 21.512589] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 21.512599] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 21.512693] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 21.512700] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 21.512836] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 21.512855] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdffff000
[ 21.554655] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 21.554660] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 21.557919] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[ 21.602550] usb usb1: configuration #1 chosen from 1 choice
[ 21.602575] hub 1-0:1.0: USB hub found
[ 21.602584] hub 1-0:1.0: 8 ports detected
[ 21.614163] SCSI subsystem initialized
[ 21.619022] libata version 2.21 loaded.
[ 21.663915] Floppy drive(s): fd0 is 1.44M
[ 21.708787] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 21.708797] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 21.708911] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 21.708918] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 21.708969] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 21.708996] ehci_hcd 0000:00:02.1: debug port 1
[ 21.709000] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 21.709011] ehci_hcd 0000:00:02.1: irq 22, io mem 0xdfffec00
[ 21.709018] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.709094] usb usb2: configuration #1 chosen from 1 choice
[ 21.709117] hub 2-0:1.0: USB hub found
[ 21.709123] hub 2-0:1.0: 8 ports detected
[ 21.733098] FDC 0 is a post-1991 82077
[ 21.816529] NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0
[ 21.816548] NFORCE-MCP61: chipset revision 162
[ 21.816550] NFORCE-MCP61: not 100% native mode: will probe irqs later
[ 21.816554] NFORCE-MCP61: BIOS didn't set cable bits correctly. Enabling workaround.
[ 21.816558] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
[ 21.816566] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[ 21.816574] Probing IDE interface ide0...
[ 22.219643] hda: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive
[ 22.419282] usb 1-3: new full speed USB device using ohci_hcd and address 2
[ 22.503262] hdb: ST380011A, ATA DISK drive
[ 22.563961] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 22.570609] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[ 22.570621] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 21
[ 22.570626] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 22.570635] forcedeth: using HIGHDMA
[ 22.584267] hda: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 22.584275] Uniform CD-ROM driver Revision: 3.20
[ 22.592675] hdb: max request size: 512KiB
[ 22.593143] hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[ 22.593412] hdb: cache flushes supported
[ 22.593443] hdb: hdb1 hdb2 <<6>usb 1-3: configuration #1 chosen from 1 choice
[ 22.656459] usbcore: registered new interface driver hiddev
[ 22.668234] input: Hewlett-Packard Company HP USB Smart Card Keyboard as /class/input/input1
[ 22.668244] input: USB HID v1.11 Keyboard [Hewlett-Packard Company HP USB Smart Card Keyboard] on usb-0000:00:02.0-3
[ 22.668258] usbcore: registered new interface driver usbhid
[ 22.668262] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 22.668386] hdb5 >
[ 23.008667] kjournald starting. Commit interval 5 seconds
[ 23.008676] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.094681] eth0: forcedeth.c: subsystem: 01043:8234 bound to 0000:00:07.0
[ 23.094797] sata_nv 0000:00:08.0: version 3.4
[ 23.095138] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 23.095147] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 20
[ 23.095285] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 23.095406] scsi0 : sata_nv
[ 23.095450] scsi1 : sata_nv
[ 23.095505] ata1: SATA max UDMA/133 cmd 0x000000000001e400 ctl 0x000000000001e082 bmdma 0x000000000001d880 irq 20
[ 23.095509] ata2: SATA max UDMA/133 cmd 0x000000000001e000 ctl 0x000000000001dc02 bmdma 0x000000000001d888 irq 20
[ 23.409944] ata1: SATA link down (SStatus 0 SControl 300)
[ 23.733512] ata2: SATA link down (SStatus 0 SControl 300)
[ 31.746026] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
[ 31.746052] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
[ 31.977782] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 32.006277] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.304035] input: PC Speaker as /class/input/input2
[ 32.881814] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[ 32.881819] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [LAZA] -> GSI 23 (level, low) -> IRQ 23
[ 32.881945] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 33.092699] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
[ 33.235086] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[ 33.237749] parport_pc 00:06: reported by Plug and Play ACPI
[ 33.237795] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 33.708527] lp0: using parport0 (interrupt-driven).
[ 33.812245] Adding 2626588k swap on /dev/hdb5. Priority:-1 extents:1 across:2626588k
[ 34.076058] EXT3 FS on hdb1, internal journal
[ 35.162462] No dock devices found.
[ 35.216059] input: Power Button (FF) as /class/input/input4
[ 35.219895] ACPI: Power Button (FF) [PWRF]
[ 35.247230] input: Power Button (CM) as /class/input/input5
[ 35.251080] ACPI: Power Button (CM) [PWRB]
[ 35.431089] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00)
[ 35.447234] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[ 38.953366] ppdev: user-space parallel port driver
[ 39.543395] audit(1193468426.080:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4887 profile="/usr/sbin/cupsd"
[ 39.837516] Failure registering capabilities with primary security module.
[ 40.260133] NET: Registered protocol family 10
[ 40.260267] lo: Disabled Privacy Extensions
[ 44.646516] NET: Registered protocol family 17
[ 59.037077] eth0: no IPv6 routers present
root@koduarvuti:/home/koduarvuti# lsmod
Module Size Used by
af_packet 28172 2
binfmt_misc 14860 1
ipv6 317192 16
ppdev 11272 0
cpufreq_ondemand 10896 0
cpufreq_conservative 9608 0
cpufreq_userspace 6048 0
cpufreq_powersave 3072 0
cpufreq_stats 8160 0
freq_table 6464 2 cpufreq_ondemand,cpufreq_stats
video 21140 0
button 10400 0
dock 12264 0
sbs 21520 0
container 6400 0
ac 7304 0
battery 12424 0
lp 15048 0
snd_hda_intel 337192 1
snd_pcm_oss 50048 0
snd_pcm 94344 2 snd_hda_intel,snd_pcm_oss
snd_mixer_oss 20096 1 snd_pcm_oss
snd_seq_dummy 5380 0
snd_seq_oss 36864 0
snd_seq_midi 11008 0
snd_rawmidi 29824 1 snd_seq_midi
snd_seq_midi_event 9984 2 snd_seq_oss,snd_seq_midi
snd_seq 62496 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 27272 2 snd_pcm,snd_seq
snd_seq_device 10260 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
parport_pc 41896 1
parport 44172 3 ppdev,lp,parport_pc
k8temp 7680 0
psmouse 45596 0
snd 69288 11 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
pcspkr 4608 0
serio_raw 9092 0
soundcore 10272 1 snd
snd_page_alloc 12560 2 snd_hda_intel,snd_pcm
shpchp 38300 0
pci_hotplug 36612 1 shpchp
i2c_nforce2 7808 0
i2c_core 30208 1 i2c_nforce2
evdev 13056 3
ext3 146576 1
jbd 69360 1 ext3
mbcache 11272 1 ext3
usbhid 32576 0
hid 33408 1 usbhid
ide_disk 20352 3
ide_cd 35488 0
cdrom 41768 1 ide_cd
ata_generic 9988 0
floppy 69608 0
sata_nv 24068 0
libata 138928 2 ata_generic,sata_nv
scsi_mod 172856 1 libata
forcedeth 55048 0
amd74xx 17328 0 [permanent]
ide_core 141200 3 ide_disk,ide_cd,amd74xx
ehci_hcd 40076 0
ohci_hcd 25092 0
usbcore 161584 4 usbhid,ehci_hcd,ohci_hcd
thermal 16528 0
processor 36232 1 thermal
fan 6920 0
fuse 52528 1
apparmor 47008 0
commoncap 9472 1 apparmor
|
|
|
|
Viimati muutis Parnakas 27.10.2007, 09:09; muudetud 2 korda
|
|
|
 |
pacho
Moderaator
Vanus: 44
Liitunud: 08.07.2005
Postitused: 618
Distributsioon: Debian GNU/Linux
|
|
|
|
Parnakas
Pingviini kasutaja
Vanus: 46
Liitunud: 04.05.2007
Postitused: 45
Asukoht: Tallinn/Väike-Maarja
Distributsioon: Ubuntu 14.04
|
|
| olen mõlemat proovinud, aga heli ei kusagil?
|
|
|
|
|
|
|
|
pacho
Moderaator
Vanus: 44
Liitunud: 08.07.2005
Postitused: 618
Distributsioon: Debian GNU/Linux
|
|
Võib-olla võtaks korraga ühe veaotsimise ette.
Lülita integreeritud heli välja ja kontrolli, et heli poelks vaigistatud
|
|
|
|
_________________
http://blog.pacho.pri.ee/
|
|
|
|
Parnakas
Pingviini kasutaja
Vanus: 46
Liitunud: 04.05.2007
Postitused: 45
Asukoht: Tallinn/Väike-Maarja
Distributsioon: Ubuntu 14.04
|
|
uuendasin vahepeal versiooni 7.04-t 7.10ks.
lspci, dmesg ja lsmod käskudele sain vastused, mis uuendasin eelmises postituses.
Kuidas saan integreeritud heli välja lülitada.
PS! Värk selline, et näiteks Skype-s ei kuule ma helinat ja mic ei tööta, aga samas testkõne juttu kuulen.
Heli eelistuste all on kõik ALSA ja seade on HDA NVidia (Alsa mixer).
Ettepanekud?
|
|
|
|
|
|
|
|
Parnakas
Pingviini kasutaja
Vanus: 46
Liitunud: 04.05.2007
Postitused: 45
Asukoht: Tallinn/Väike-Maarja
Distributsioon: Ubuntu 14.04
|
|
root@koduarvuti:/home/koduarvuti# cat /proc/asound/card0/codec#0 | grep Codec
Codec: Realtek ALC662 rev1
|
|
|
|
|
|
|
|
|
|
|
