| Autor |
Sõnum |
karl
Pingviini aktivist
Vanus: 33
Liitunud: 04.12.2005
Postitused: 123
Distributsioon: Kubunutu 6.06
|
|
Ühendasin siis kaamera arvuti taha ja arvuti leidis kaamera ülesse aga kui hakkan kaamera kausta avama siis tuleb error:
Could not mount device.
The reported error was:
mount: can't find /dev/sda1 in /etc/fstab or /etc/mtab
Et mida siis teha et see korda saada?
|
|
|
|
|
|
|
  |
pacho
Moderaator
Vanus: 43
Liitunud: 08.07.2005
Postitused: 618
Distributsioon: Debian GNU/Linux
|
|
Proovi kaamera lülitada välja mälusedme re%u017Eiimist ja ühenda siis arvuti taha.
Kas Kubuntu või Ubuntu?
|
|
|
|
_________________
http://blog.pacho.pri.ee/
|
|
|
 |
karl
Pingviini aktivist
Vanus: 33
Liitunud: 04.12.2005
Postitused: 123
Distributsioon: Kubunutu 6.06
|
|
| Ei saanud päris hästi aru mida sa öelda tahad, ag akasutan kubuntut
|
|
|
|
|
|
|
|
pacho
Moderaator
Vanus: 43
Liitunud: 08.07.2005
Postitused: 618
Distributsioon: Debian GNU/Linux
|
|
Tavaliselt on digikatel võimalus lülitada seda viisil, et arvuti näeks seda mäluseadme või kaamerana. Tundub, et sinu kaamerat näeb mäluna. Kuna fstab'is puudub selle kohta staatiline kirje siis ei saa sinu linux ka seadme ühendamisega hakkama. Mis on veidi kummaline, kuna HAL/udev'i ilmumise järel puudub eraldi kirjeks otsene vajadus.
Ole hea ühenda kaamera arvutiga ja kopeeri siia käsu dmesg väljund
Edit: Muutsin jutu veidike selgemaks. Nädalavahetus mõjub veel vist...
|
|
|
|
_________________
http://blog.pacho.pri.ee/
Viimati muutis pacho 17.07.2006, 15:00; muudetud 1 kord
|
|
|
|
karl
Pingviini aktivist
Vanus: 33
Liitunud: 04.12.2005
Postitused: 123
Distributsioon: Kubunutu 6.06
|
|
[4294667.296000] Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[4294667.296000] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
[4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[4294667.296000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 255MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 65520
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 61424 pages, LIFO batch:15
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.2 present.
[4294667.296000] ACPI: RSDP (v000 IntelR ) @ 0x000f7500
[4294667.296000] ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
[4294667.296000] ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
[4294667.296000] ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x408
[4294667.296000] Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash
[4294667.296000] Found and enabled local APIC!
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[4294667.296000] Detected 2020.878 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294670.464000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294670.465000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294670.473000] Memory: 248884k/262080k available (1976k kernel code, 12568k reserved, 606k data, 288k init, 0k highmem)
[4294670.473000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294670.533000] Calibrating delay using timer specific routine.. 4042.71 BogoMIPS (lpj=2021358)
[4294670.533000] Security Framework v1.0.0 initialized
[4294670.533000] SELinux: Disabled at boot.
[4294670.533000] Mount-cache hash table entries: 512
[4294670.533000] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[4294670.533000] CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[4294670.533000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[4294670.533000] CPU: L2 cache: 512K
[4294670.533000] CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
[4294670.533000] mtrr: v2.0 (20020519)
[4294670.533000] CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
[4294670.533000] Enabling fast FPU save and restore... done.
[4294670.533000] Enabling unmasked SIMD FPU exception support... done.
[4294670.533000] Checking 'hlt' instruction... OK.
[4294670.537000] checking if image is initramfs... it is
[4294671.280000] Freeing initrd memory: 6834k freed
[4294671.300000] ACPI: Looking for DSDT ... not found!
[4294671.302000] ACPI: setting ELCR to 0200 (from 0e00)
[4294671.428000] NET: Registered protocol family 16
[4294671.428000] EISA bus registered
[4294671.428000] ACPI: bus type pci registered
[4294671.442000] PCI: PCI BIOS revision 2.10 entry at 0xfaf40, last bus=2
[4294671.443000] PCI: Using configuration type 1
[4294671.443000] ACPI: Subsystem revision 20051216
[4294671.453000] ACPI: Interpreter enabled
[4294671.453000] ACPI: Using PIC for interrupt routing
[4294671.454000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294671.454000] PCI: Probing PCI hardware (bus 00)
[4294671.457000] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[4294671.457000] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[4294671.457000] Boot video device is 0000:01:00.0
[4294671.458000] PCI: Transparent bridge - 0000:00:1e.0
[4294671.458000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294671.480000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[4294671.482000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[4294671.482000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[4294671.482000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294671.483000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[4294671.483000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[4294671.483000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294671.484000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[4294671.484000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[4294671.488000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294671.488000] pnp: PnP ACPI init
[4294671.493000] pnp: PnP ACPI: found 14 devices
[4294671.493000] PnPBIOS: Disabled by ACPI PNP
[4294671.493000] PCI: Using ACPI for IRQ routing
[4294671.493000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294671.511000] pnp: 00:01: ioport range 0x400-0x4bf could not be reserved
[4294671.511000] PCI: Bridge: 0000:00:01.0
[4294671.511000] IO window: disabled.
[4294671.511000] MEM window: e8000000-e9ffffff
[4294671.511000] PREFETCH window: d8000000-e7ffffff
[4294671.511000] PCI: Bridge: 0000:00:1e.0
[4294671.511000] IO window: c000-cfff
[4294671.511000] MEM window: ea000000-ea0fffff
[4294671.511000] PREFETCH window: disabled.
[4294671.511000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294671.512000] audit: initializing netlink socket (disabled)
[4294671.512000] audit(1153079507.511:1): initialized
[4294671.512000] VFS: Disk quotas dquot_6.5.1
[4294671.512000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294671.512000] Initializing Cryptographic API
[4294671.512000] io scheduler noop registered
[4294671.512000] io scheduler anticipatory registered
[4294671.512000] io scheduler deadline registered
[4294671.512000] io scheduler cfq registered
[4294671.512000] isapnp: Scanning for PnP cards...
[4294671.869000] isapnp: No Plug & Play device found
[4294671.888000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294671.890000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294671.890000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294671.890000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294671.890000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294671.890000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294671.893000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294671.893000] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294671.894000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294671.894000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294671.894000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294671.894000] mice: PS/2 mouse device common for all mice
[4294671.894000] EISA: Probing bus 0 at eisa.0
[4294671.894000] EISA: Detected 0 cards.
[4294671.894000] NET: Registered protocol family 2
[4294671.904000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[4294671.904000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[4294671.904000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[4294671.904000] TCP: Hash tables configured (established 16384 bind 16384)
[4294671.904000] TCP reno registered
[4294671.904000] TCP bic registered
[4294671.904000] NET: Registered protocol family 1
[4294671.904000] NET: Registered protocol family 8
[4294671.904000] NET: Registered protocol family 20
[4294671.904000] Using IPI Shortcut mode
[4294671.904000] ACPI wakeup devices:
[4294671.904000] PCI0 HUB0 USB0 USB1 MODM UAR1 UAR2
[4294671.904000] ACPI: (supports S0 S1 S4 S5)
[4294671.904000] Freeing unused kernel memory: 288k freed
[4294671.919000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294671.966000] vga16fb: initializing
[4294671.966000] vga16fb: mapped to 0xc00a0000
[4294672.122000] Console: switching to colour frame buffer device 80x25
[4294672.122000] fb0: VGA16 VGA frame buffer device
[4294673.195000] Capability LSM initialized
[4294673.349000] ACPI: Fan [FAN] (on)
[4294673.354000] ACPI: Processor [CPU0] (supports 2 throttling states)
[4294673.357000] ACPI: Thermal Zone [THRM] (40 C)
[4294674.051000] ICH2: IDE controller at PCI slot 0000:00:1f.1
[4294674.051000] ICH2: chipset revision 5
[4294674.051000] ICH2: not 100% native mode: will probe irqs later
[4294674.051000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
[4294674.051000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
[4294674.051000] Probing IDE interface ide0...
[4294674.315000] hda: ST320410A, ATA DISK drive
[4294674.929000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294674.932000] Probing IDE interface ide1...
[4294675.604000] hdc: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
[4294675.910000] ide1 at 0x170-0x177,0x376 on irq 15
[4294675.922000] hda: max request size: 128KiB
[4294675.933000] hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100)
[4294675.933000] hda: cache flushes not supported
[4294675.933000] hda: hda1 hda2 < hda5 >
[4294676.009000] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294676.009000] Uniform CD-ROM driver Revision: 3.20
[4294676.323000] usbcore: registered new driver usbfs
[4294676.324000] usbcore: registered new driver hub
[4294676.326000] USB Universal Host Controller Interface driver v2.3
[4294676.326000] **** SET: Misaligned resource pointer: cfef3302 Type 07 Len 0
[4294676.326000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[4294676.326000] PCI: setting IRQ 11 as level-triggered
[4294676.326000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[4294676.326000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294676.326000] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[4294676.327000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[4294676.327000] uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000d000
[4294676.327000] hub 1-0:1.0: USB hub found
[4294676.327000] hub 1-0:1.0: 2 ports detected
[4294676.428000] **** SET: Misaligned resource pointer: cfaf8ec2 Type 07 Len 0
[4294676.428000] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[4294676.428000] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
[4294676.428000] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[4294676.428000] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[4294676.428000] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[4294676.428000] uhci_hcd 0000:00:1f.4: irq 11, io base 0x0000d800
[4294676.429000] hub 2-0:1.0: USB hub found
[4294676.429000] hub 2-0:1.0: 2 ports detected
[4294676.606000] Attempting manual resume
[4294676.653000] EXT3-fs: mounted filesystem with ordered data mode.
[4294676.675000] kjournald starting. Commit interval 5 seconds
[4294692.791000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294692.816000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294692.848000] Linux agpgart interface v0.101 (c) Dave Jones
[4294692.867000] agpgart: Detected an Intel i845 Chipset.
[4294692.874000] agpgart: AGP aperture is 128M @ 0xd0000000
[4294693.129000] hw_random: RNG not detected
[4294693.137000] Floppy drive(s): fd0 is 1.44M
[4294693.151000] FDC 0 is a post-1991 82077
[4294693.188000] Real Time Clock Driver v1.12
[4294693.273000] input: PC Speaker as /class/input/input1
[4294693.476000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[4294693.705000] parport: PnPBIOS parport detected.
[4294693.705000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[4294693.724000] gameport: EMU10K1 is pci0000:02:02.1/gameport0, io 0xc400, speed 932kHz
[4294693.907000] nvidia: module license 'NVIDIA' taints kernel.
[4294693.932000] **** SET: Misaligned resource pointer: cbce9102 Type 07 Len 0
[4294693.932000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[4294693.932000] PCI: setting IRQ 10 as level-triggered
[4294693.932000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[4294693.932000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7174 Tue Mar 22 06:44:39 PST 2005
[4294694.058000] ts: Compaq touchscreen protocol output
[4294694.089000] 8139too Fast Ethernet driver 0.9.27
[4294694.090000] **** SET: Misaligned resource pointer: ca887102 Type 07 Len 0
[4294694.090000] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 11
[4294694.090000] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK0] -> GSI 11 (level, low) -> IRQ 11
[4294694.091000] eth0: RealTek RTL8139 at 0xd0956000, 00:c0:26:8a:a5:17, IRQ 11
[4294694.091000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[4294694.111000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294694.351000] **** SET: Misaligned resource pointer: cb636dc2 Type 07 Len 0
[4294694.351000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[4294694.351000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[4294694.351000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[4294694.649000] eth0: link up, 100Mbps, half-duplex, lpa 0x40A1
[4294694.661000] intel8x0_measure_ac97_clock: measured 50066 usecs
[4294694.661000] intel8x0: clocking to 48000
[4294694.665000] **** SET: Misaligned resource pointer: cbca0f02 Type 07 Len 0
[4294694.665000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
[4294694.665000] PCI: setting IRQ 9 as level-triggered
[4294694.665000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9
[4294695.528000] lp0: using parport0 (interrupt-driven).
[4294695.597000] Adding 746980k swap on /dev/hda5. Priority:-1 extents:1 across:746980k
[4294695.710000] NET: Registered protocol family 17
[4294695.784000] EXT3 FS on hda1, internal journal
[4294696.005000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294696.005000] md: bitmap version 4.39
[4294696.990000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294697.834000] cdrom: open failed.
[4294704.316000] CSLIP: code copyright 1989 Regents of the University of California
[4294704.322000] PPP generic driver version 2.4.2
[4294704.425000] NET: Registered protocol family 10
[4294704.426000] lo: Disabled Privacy Extensions
[4294704.426000] IPv6 over IPv4 tunneling driver
[4294704.800000] NET: Registered protocol family 24
[4294706.510000] ip_tables: (C) 2000-2002 Netfilter core team
[4294707.234000] ACPI: Power Button (FF) [PWRF]
[4294707.234000] ACPI: Power Button (CM) [PWRB]
[4294707.360000] ibm_acpi: ec object not found
[4294707.388000] pcc_acpi: loading...
[4294710.383000] ppdev: user-space parallel port driver
[4294710.904000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294710.905000] apm: overridden by ACPI.
[4294714.255000] Bluetooth: Core ver 2.8
[4294714.255000] NET: Registered protocol family 31
[4294714.255000] Bluetooth: HCI device and connection manager initialized
[4294714.255000] Bluetooth: HCI socket layer initialized
[4294714.353000] Bluetooth: L2CAP ver 2.8
[4294714.353000] Bluetooth: L2CAP socket layer initialized
[4294714.387000] Bluetooth: RFCOMM socket layer initialized
[4294714.387000] Bluetooth: RFCOMM TTY layer initialized
[4294714.387000] Bluetooth: RFCOMM ver 1.7
[4294715.300000] eth0: no IPv6 routers present
[4294718.235000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[4294718.236000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[4294718.236000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[4294718.531000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[4294718.531000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[4294718.531000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[4298616.019000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4298616.098000] ISOFS: changing to secondary root
[4338635.607000] usb 2-2: new full speed USB device using uhci_hcd and address 2
[4338636.072000] SCSI subsystem initialized
[4338636.110000] Initializing USB Mass Storage driver...
[4338636.111000] scsi0 : SCSI emulation for USB Mass Storage devices
[4338636.111000] usb-storage: device found at 2
[4338636.111000] usb-storage: waiting for device to settle before scanning
[4338636.111000] usbcore: registered new driver usb-storage
[4338636.111000] USB Mass Storage support registered.
[4338641.115000] Vendor: OLYMPUS Model: C765UZ Rev: 1.00
[4338641.115000] Type: Direct-Access ANSI SCSI revision: 02
[4338641.118000] usb-storage: device scan complete
[4338641.173000] Driver 'sd' needs updating - please use bus_type methods
[4338641.179000] SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
[4338641.182000] sda: Write Protect is off
[4338641.182000] sda: Mode Sense: 18 00 00 08
[4338641.182000] sda: assuming drive cache: write through
[4338641.191000] SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
[4338641.194000] sda: Write Protect is off
[4338641.194000] sda: Mode Sense: 18 00 00 08
[4338641.194000] sda: assuming drive cache: write through
[4338641.194000] sda: sda1
[4338641.208000] sd 0:0:0:0: Attached scsi removable disk sda
[4338641.227000] sd 0:0:0:0: Attached scsi generic sg0 type 0
|
|
|
|
|
|
|
|
laurivosandi
Moderaator
Vanus: 36
Liitunud: 08.07.2005
Postitused: 647
Asukoht: Tallinn
Distributsioon: Estobuntu, Debian
|
|
| tundub olevat kubuntu kamm..
|
|
|
|
|
|
|
 |
imre
Vana Pingviin
Liitunud: 16.08.2005
Postitused: 2648
Asukoht: Saku kant
Distributsioon: Ubuntu
|
|
Proovi külge ühendada see kaamera kui ROOT:
su mount -t vfat /dev/sda1 /kuhuiganes
Võid ju proovida ka gphoto2 ja gtkam kooslust.
KDE alla sobib vast paremini digikam.
Mina enda kaamerat ei saagi ülalnimetatud moel ühendada.
Ainuke lahendus on mulle gphoto2.
|
|
|
|
_________________
Enne teema püstitamist kasutage OTSINGUT
Küsi targalt: Infot siit!
Kui aru ei saa, siis küsi.
|
|
|
|
Ziim
Pingviini kasutaja
Vanus: 35
Liitunud: 08.07.2005
Postitused: 99
Distributsioon: bleedin' edge
|
|
siinpool töötab C-760UZ sellise FSTAB'i kirjega:
| Kood: | | /dev/sda1 /fotod msdos defaults,user,noauto 0 0 |
käsitsiühendamine mudugist.
samas see toimib Debian Woody peal. ja konkreetne kogemus HAL'i ja dbus'iga selle kaameraga puudub.
|
|
|
|
_________________
Debian | Ubuntu | GNOME | Firefox
|
|
|
|
karl
Pingviini aktivist
Vanus: 33
Liitunud: 04.12.2005
Postitused: 123
Distributsioon: Kubunutu 6.06
|
|
Tere! fotokaga ei jamanudgi, läksin sõbrsa juurde, aga nüüd vaja mp3 playerisse panna lugusid ja tuleb sama error. Playeriks Philips SA1100.
Et kas keegi saaks öelda täpse käsu kuidas ma saaksin playeri külge ühendada?
|
|
|
|
|
|
|
|
Ziim
Pingviini kasutaja
Vanus: 35
Liitunud: 08.07.2005
Postitused: 99
Distributsioon: bleedin' edge
|
|
kirjuta FSTAB'i vastav rida. "sudo gedit /etc/fstab"
tõenäoliselt on see /dev/sda ja failisüsteemiks vfat.
teed umbes sellise kirje sinna kohe teiste järgi:
/dev/sda /media/mp3 vfat rw,user 0 0
ja loo see /media/mp3 kataloog kah enne.
|
|
|
|
_________________
Debian | Ubuntu | GNOME | Firefox
|
|
|
|
karl
Pingviini aktivist
Vanus: 33
Liitunud: 04.12.2005
Postitused: 123
Distributsioon: Kubunutu 6.06
|
|
|
|
DeadMeat
Pingviini külastaja
Liitunud: 21.04.2006
Postitused: 32
Asukoht: Tartu
Distributsioon: gentoo
|
|
aga, kuidas teha nii, et kui kaamera taha ühendada, siis automaatselt moundib ära ? Praegu peab käsitsi mountima igakord, kuid väga tore oleks kui automaatselt ise teeks gentoo seda.
Selline rida on /etc/fstab'is muidu:
| Kood: | | /dev/sda1 /mnt/digicam vfat noauto,user,exec,sync 0 0 |
|
|
|
|
|
|
|
|
|
|
|
