Portaal Portaal Pingviini veeb foorumi pealeht
  Viki  |  IRC  |  Otsing  |  Küsimused ja vastused  |  Profiil  |  Privaatsõnumite vaatamiseks logi sisse  | Logi sisse või Registreeru
<empty>

Digi tv linuxis
Mine lehele Eelmine  1, 2, 3, 4, 5, 6, 7, 8  Järgmine 		Vaata järgmist teemat
Vaata eelmist teemat
Postita uus teemaVasta teemale Pingviini veeb foorumi pealeht » Linux » Linux - raud » Digi tv linuxis
Autor Sõnum
Indrekus
 Pingviini külastaja
Pingviini külastaja



Liitunud: 27.11.2009
Postitused: 31

Distributsioon: Linux Mint
 estonia.gif
postituspostitatud: 11.08.2012, 12:55  postituse pealkiri:  (teema puudub)  
No maolen proovinud sinu esimest linki ja http://linbay.blogspot.com/2012/05/hassle-almost-free-rtl2832u-linux.html seda linki, aga ma ei saa seda tööle. Ma vist teen midagi valesti, või ma ei tea
Kas ma üldse teen õigesti? Siin on siis see esimese õpetuse tegu.
Kood:

indrek@indrek-NF110-NF210-NF310:~$ sudo apt-get install linux-headers-`uname-r`
uname-r: command not found
[sudo] password for indrek:
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Virtual packages like 'linux-headers' can't be removed
0 uuendatud, 0 värskelt paigaldatud, 0 eemaldada ja 0 uuendamata.
indrek@indrek-NF110-NF210-NF310:~$ wget http://www.dfragkopoulos.gr/datasources/dvb/rtl2832u-3.0.tar.bz2
--2012-08-11 23:15:43--  http://www.dfragkopoulos.gr/datasources/dvb/rtl2832u-3.0.tar.bz2
Lahendan www.dfragkopoulos.gr (www.dfragkopoulos.gr)... 178.238.226.218
Loon ÃŒhendust serveriga www.dfragkopoulos.gr (www.dfragkopoulos.gr)|178.238.226.218|:80... ÃŒhendus loodud.
HTTP pÀring saadetud, ootan vastust... 200 OK
Pikkus: 258785 (253K) [application/octet-stream]
Salvestan: `rtl2832u-3.0.tar.bz2'

100%[=================================================================>] 258 785     46,0K/s   aeg 5,2s   

2012-08-11 23:15:49 (48,7 KB/s) - `rtl2832u-3.0.tar.bz2' salvestatud [258785/258785]

indrek@indrek-NF110-NF210-NF310:~$ tar xjf rt2832u-3.0.tar.bz2
tar (child): rt2832u-3.0.tar.bz2: open ei õnnestu: No such file or directory
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now
indrek@indrek-NF110-NF210-NF310:~$ cd rtl2832u-3.0
indrek@indrek-NF110-NF210-NF310:~/rtl2832u-3.0$ make
make -C /usr/src/linux-headers-`uname -r` SUBDIRS=/home/indrek/rtl2832u-3.0 modules
make[1]: Entering directory `/usr/src/linux-headers-3.2.0-29-generic-pae'
  CC [M]  /home/indrek/rtl2832u-3.0/demod_rtl2832.o
  CC [M]  /home/indrek/rtl2832u-3.0/dvbt_demod_base.o
  CC [M]  /home/indrek/rtl2832u-3.0/dvbt_nim_base.o
  CC [M]  /home/indrek/rtl2832u-3.0/foundation.o
  CC [M]  /home/indrek/rtl2832u-3.0/math_mpi.o
  CC [M]  /home/indrek/rtl2832u-3.0/nim_rtl2832_mxl5007t.o
  CC [M]  /home/indrek/rtl2832u-3.0/nim_rtl2832_fc2580.o
  CC [M]  /home/indrek/rtl2832u-3.0/nim_rtl2832_mt2266.o
  CC [M]  /home/indrek/rtl2832u-3.0/rtl2832u.o
  CC [M]  /home/indrek/rtl2832u-3.0/rtl2832u_fe.o
  CC [M]  /home/indrek/rtl2832u-3.0/rtl2832u_io.o
  CC [M]  /home/indrek/rtl2832u-3.0/tuner_mxl5007t.o
  CC [M]  /home/indrek/rtl2832u-3.0/tuner_fc2580.o
  CC [M]  /home/indrek/rtl2832u-3.0/tuner_mt2266.o
  CC [M]  /home/indrek/rtl2832u-3.0/tuner_tua9001.o
  CC [M]  /home/indrek/rtl2832u-3.0/nim_rtl2832_tua9001.o
  CC [M]  /home/indrek/rtl2832u-3.0/tuner_fc0012.o
  CC [M]  /home/indrek/rtl2832u-3.0/nim_rtl2832_fc0012.o
  CC [M]  /home/indrek/rtl2832u-3.0/demod_rtl2836.o
  CC [M]  /home/indrek/rtl2832u-3.0/dtmb_demod_base.o
  CC [M]  /home/indrek/rtl2832u-3.0/dtmb_nim_base.o
  CC [M]  /home/indrek/rtl2832u-3.0/nim_rtl2836_fc2580.o
  CC [M]  /home/indrek/rtl2832u-3.0/nim_rtl2836_mxl5007t.o
  CC [M]  /home/indrek/rtl2832u-3.0/tuner_e4000.o
  CC [M]  /home/indrek/rtl2832u-3.0/nim_rtl2832_e4000.o
  CC [M]  /home/indrek/rtl2832u-3.0/tuner_mt2063.o
/home/indrek/rtl2832u-3.0/tuner_mt2063.c: In function ‘MT2063_Open’:
/home/indrek/rtl2832u-3.0/tuner_mt2063.c:1363:13: warning: this decimal constant is unsigned only in ISO C90 [enabled by default]
/home/indrek/rtl2832u-3.0/tuner_mt2063.c: In function ‘MT2063_Close’:
/home/indrek/rtl2832u-3.0/tuner_mt2063.c:1462:5: warning: this decimal constant is unsigned only in ISO C90 [enabled by default]
/home/indrek/rtl2832u-3.0/tuner_mt2063.c: In function ‘IsSpurInBand’:
/home/indrek/rtl2832u-3.0/tuner_mt2063.c:4958:5: warning: this decimal constant is unsigned only in ISO C90 [enabled by default]
  CC [M]  /home/indrek/rtl2832u-3.0/demod_rtl2840.o
  CC [M]  /home/indrek/rtl2832u-3.0/tuner_max3543.o
/home/indrek/rtl2832u-3.0/tuner_max3543.c: In function ‘MAX3543_Init’:
/home/indrek/rtl2832u-3.0/tuner_max3543.c:648:2: warning: this decimal constant is unsigned only in ISO C90 [enabled by default]
  CC [M]  /home/indrek/rtl2832u-3.0/nim_rtl2832_mt2063.o
  CC [M]  /home/indrek/rtl2832u-3.0/nim_rtl2832_max3543.o
  CC [M]  /home/indrek/rtl2832u-3.0/nim_rtl2840_mt2063.o
  CC [M]  /home/indrek/rtl2832u-3.0/nim_rtl2840_max3543.o
  CC [M]  /home/indrek/rtl2832u-3.0/qam_demod_base.o
  CC [M]  /home/indrek/rtl2832u-3.0/qam_nim_base.o
  CC [M]  /home/indrek/rtl2832u-3.0/tuner_tda18272.o
  CC [M]  /home/indrek/rtl2832u-3.0/nim_rtl2832_tda18272.o
  CC [M]  /home/indrek/rtl2832u-3.0/rtl2832u_ioctl.o
  CC [M]  /home/indrek/rtl2832u-3.0/nim_rtl2832_fc0013.o
  CC [M]  /home/indrek/rtl2832u-3.0/tuner_fc0013.o
  LD [M]  /home/indrek/rtl2832u-3.0/dvb-usb-rtl2832u.o
  Building modules, stage 2.
  MODPOST 1 modules
WARNING: "__udivdi3" [/home/indrek/rtl2832u-3.0/dvb-usb-rtl2832u.ko] undefined!
WARNING: "__umoddi3" [/home/indrek/rtl2832u-3.0/dvb-usb-rtl2832u.ko] undefined!
WARNING: "__divdi3" [/home/indrek/rtl2832u-3.0/dvb-usb-rtl2832u.ko] undefined!
  CC      /home/indrek/rtl2832u-3.0/dvb-usb-rtl2832u.mod.o
  LD [M]  /home/indrek/rtl2832u-3.0/dvb-usb-rtl2832u.ko
make[1]: Leaving directory `/usr/src/linux-headers-3.2.0-29-generic-pae'
indrek@indrek-NF110-NF210-NF310:~/rtl2832u-3.0$ sudo make install
cp dvb-usb-rtl2832u.ko /lib/modules/`uname -r`/kernel/drivers/media/dvb/dvb-usb/
depmod -a
indrek@indrek-NF110-NF210-NF310:~/rtl2832u-3.0$

ja dmesg on siis hiljem:

Kood:

[    0.494855] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.494866] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.494876] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.494886] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.494897] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.494907] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.494918] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.494928] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.494939] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.494956] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.494967] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.494977] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.494988] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.494999] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.495010] pnp 00:00: [mem 0x80000000-0xf7ffffff window]
[    0.495020] pnp 00:00: [io  0x0d00-0xfdff window]
[    0.495030] pnp 00:00: [mem 0x00000000 window]
[    0.495040] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.495238] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.496090] pnp 00:01: [io  0x0010-0x001f]
[    0.496102] pnp 00:01: [io  0x0024-0x0025]
[    0.496111] pnp 00:01: [io  0x0028-0x0029]
[    0.496120] pnp 00:01: [io  0x002c-0x002d]
[    0.496129] pnp 00:01: [io  0x0030-0x0031]
[    0.496139] pnp 00:01: [io  0x0034-0x0035]
[    0.496148] pnp 00:01: [io  0x0038-0x0039]
[    0.496157] pnp 00:01: [io  0x003c-0x003d]
[    0.496167] pnp 00:01: [io  0x0072-0x0077]
[    0.496176] pnp 00:01: [io  0x0080]
[    0.496185] pnp 00:01: [io  0x0090-0x009f]
[    0.496195] pnp 00:01: [io  0x00a4-0x00a5]
[    0.496205] pnp 00:01: [io  0x00a8-0x00a9]
[    0.496214] pnp 00:01: [io  0x00ac-0x00ad]
[    0.496223] pnp 00:01: [io  0x00b0-0x00b5]
[    0.496232] pnp 00:01: [io  0x00b8-0x00b9]
[    0.496241] pnp 00:01: [io  0x00bc-0x00bd]
[    0.496251] pnp 00:01: [io  0x0800-0x080f]
[    0.496260] pnp 00:01: [io  0x1000-0x107f]
[    0.496270] pnp 00:01: [io  0x1180-0x11bf]
[    0.496279] pnp 00:01: [io  0x002e-0x002f]
[    0.496288] pnp 00:01: [io  0x04d0-0x04d1]
[    0.496297] pnp 00:01: [io  0xfe00]
[    0.496306] pnp 00:01: [io  0x164e-0x174c]
[    0.496316] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.496327] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.496336] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[    0.496346] pnp 00:01: [mem 0xfef00000-0xfeffffff]
[    0.496606] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.496620] system 00:01: [io  0x1000-0x107f] has been reserved
[    0.496632] system 00:01: [io  0x1180-0x11bf] has been reserved
[    0.496645] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.496656] system 00:01: [io  0xfe00] has been reserved
[    0.496668] system 00:01: [io  0x164e-0x174c] has been reserved
[    0.496682] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.496695] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.496707] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.496720] system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
[    0.496734] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.496782] pnp 00:02: [io  0x0000-0x000f]
[    0.496793] pnp 00:02: [io  0x0081-0x008f]
[    0.496802] pnp 00:02: [io  0x00c0-0x00df]
[    0.496812] pnp 00:02: [dma 4]
[    0.496943] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.496989] pnp 00:03: [io  0x00f0-0x00fe]
[    0.497016] pnp 00:03: [irq 13]
[    0.497136] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.497272] pnp 00:04: [io  0x0070-0x0071]
[    0.497294] pnp 00:04: [irq 8]
[    0.497417] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.497461] pnp 00:05: [io  0x0061]
[    0.497589] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.497692] pnp 00:06: [io  0x0060]
[    0.497703] pnp 00:06: [io  0x0064]
[    0.497722] pnp 00:06: [irq 1]
[    0.497847] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.497987] pnp 00:07: [irq 12]
[    0.498133] pnp 00:07: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[    0.498637] pnp 00:08: [mem 0xff800000-0xffffffff]
[    0.498776] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[    0.499954] pnp: PnP ACPI: found 9 devices
[    0.499967] ACPI: ACPI bus type pnp unregistered
[    0.499979] PnPBIOS: Disabled by ACPI PNP
[    0.545698] PCI: max bus depth: 1 pci_try_num: 2
[    0.545828] pci 0000:00:1c.3: BAR 14: assigned [mem 0x80000000-0x801fffff]
[    0.545847] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.545865] pci 0000:00:1c.3: BAR 13: assigned [io  0x3000-0x3fff]
[    0.545883] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.545900] pci 0000:00:1c.1: BAR 14: assigned [mem 0x80600000-0x807fffff]
[    0.545917] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80800000-0x809fffff 64bit pref]
[    0.545934] pci 0000:00:1c.1: BAR 13: assigned [io  0x4000-0x4fff]
[    0.545951] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80a00000-0x80bfffff 64bit pref]
[    0.545968] pci 0000:00:1c.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.545980] pci 0000:00:1c.0: PCI bridge to [bus 05-05]
[    0.545992] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.546007] pci 0000:00:1c.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.546021] pci 0000:00:1c.0:   bridge window [mem 0x80a00000-0x80bfffff 64bit pref]
[    0.546038] pci 0000:00:1c.1: PCI bridge to [bus 07-07]
[    0.546049] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.546064] pci 0000:00:1c.1:   bridge window [mem 0x80600000-0x807fffff]
[    0.546078] pci 0000:00:1c.1:   bridge window [mem 0x80800000-0x809fffff 64bit pref]
[    0.546095] pci 0000:00:1c.2: PCI bridge to [bus 09-09]
[    0.546106] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.546121] pci 0000:00:1c.2:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.546135] pci 0000:00:1c.2:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.546152] pci 0000:00:1c.3: PCI bridge to [bus 0b-0b]
[    0.546162] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.546177] pci 0000:00:1c.3:   bridge window [mem 0x80000000-0x801fffff]
[    0.546191] pci 0000:00:1c.3:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.546209] pci 0000:00:1e.0: PCI bridge to [bus 11-11]
[    0.546279] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.546295] pci 0000:00:1c.0: setting latency timer to 64
[    0.546313] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[    0.546341] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.546358] pci 0000:00:1c.1: setting latency timer to 64
[    0.546400] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.546416] pci 0000:00:1c.2: setting latency timer to 64
[    0.546435] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[    0.546463] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.546478] pci 0000:00:1c.3: setting latency timer to 64
[    0.546497] pci 0000:00:1e.0: setting latency timer to 64
[    0.546511] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.546521] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.546531] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
[    0.546541] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.546551] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.546561] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[    0.546571] pci_bus 0000:00: resource 10 [mem 0x80000000-0xf7ffffff]
[    0.546581] pci_bus 0000:00: resource 11 [io  0x0d00-0xfdff]
[    0.546591] pci_bus 0000:05: resource 0 [io  0x5000-0x5fff]
[    0.546601] pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff]
[    0.546612] pci_bus 0000:05: resource 2 [mem 0x80a00000-0x80bfffff 64bit pref]
[    0.546622] pci_bus 0000:07: resource 0 [io  0x4000-0x4fff]
[    0.546632] pci_bus 0000:07: resource 1 [mem 0x80600000-0x807fffff]
[    0.546642] pci_bus 0000:07: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[    0.546653] pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
[    0.546662] pci_bus 0000:09: resource 1 [mem 0xf0200000-0xf02fffff]
[    0.546673] pci_bus 0000:09: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.546683] pci_bus 0000:0b: resource 0 [io  0x3000-0x3fff]
[    0.546693] pci_bus 0000:0b: resource 1 [mem 0x80000000-0x801fffff]
[    0.546704] pci_bus 0000:0b: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.546714] pci_bus 0000:11: resource 4 [io  0x0000-0x0cf7]
[    0.546724] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
[    0.546734] pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
[    0.546744] pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.546754] pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.546764] pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
[    0.546774] pci_bus 0000:11: resource 10 [mem 0x80000000-0xf7ffffff]
[    0.546784] pci_bus 0000:11: resource 11 [io  0x0d00-0xfdff]
[    0.546896] NET: Registered protocol family 2
[    0.547127] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.547829] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.549124] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.549729] TCP: Hash tables configured (established 131072 bind 65536)
[    0.549738] TCP reno registered
[    0.549750] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.549777] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.550078] NET: Registered protocol family 1
[    0.550136] pci 0000:00:02.0: Boot video device
[    0.550222] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.550253] pci 0000:00:1d.0: PCI INT A disabled
[    0.550277] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.550305] pci 0000:00:1d.1: PCI INT B disabled
[    0.550327] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.550355] pci 0000:00:1d.2: PCI INT C disabled
[    0.550377] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.550404] pci 0000:00:1d.3: PCI INT D disabled
[    0.550428] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.550484] pci 0000:00:1d.7: PCI INT A disabled
[    0.550603] PCI: CLS 32 bytes, default 64
[    0.550616] Simple Boot Flag at 0x36 set to 0x1
[    0.552130] audit: initializing netlink socket (disabled)
[    0.552161] type=2000 audit(1344726441.548:1): initialized
[    0.624425] highmem bounce pool size: 64 pages
[    0.624445] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.643183] VFS: Disk quotas dquot_6.5.2
[    0.643410] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.645595] fuse init (API version 7.17)
[    0.645990] msgmni has been set to 1685
[    0.647370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.647479] io scheduler noop registered
[    0.647487] io scheduler deadline registered
[    0.647514] io scheduler cfq registered (default)
[    0.647881] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.647982] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.648207] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.648297] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.648454] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.648544] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.648714] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.648804] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.649062] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.649155] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.649395] intel_idle: MWAIT substates: 0x20220
[    0.649423] intel_idle: v0.4 model 0x1C
[    0.649430] intel_idle: lapic_timer_reliable_states 0x2
[    0.649974] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.650473] ACPI: AC Adapter [ADP1] (on-line)
[    0.650975] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.651184] ACPI: Lid Switch [LID0]
[    0.651355] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.651373] ACPI: Power Button [PWRB]
[    0.651568] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.651583] ACPI: Sleep Button [SLPB]
[    0.651746] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.651760] ACPI: Power Button [PWRF]
[    0.666612] thermal LNXTHERM:00: registered as thermal_zone0
[    0.666624] ACPI: Thermal Zone [TZ00] (28 C)
[    0.666714] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.666746] ACPI: Battery Slot [BAT1] (battery present)
[    0.666879] ERST: Table is not found!
[    0.666886] GHES: HEST is not enabled!
[    0.667268] isapnp: Scanning for PnP cards...
[    0.667312] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.675527] ACPI: Battery Slot [BAT1] (battery present)
[    1.021654] isapnp: No Plug & Play device found
[    1.110652] Freeing initrd memory: 13824k freed
[    1.248895] Linux agpgart interface v0.103
[    1.249083] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    1.249316] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    1.249646] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.249981] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.255427] brd: module loaded
[    1.258311] loop: module loaded
[    1.258678] ahci 0000:00:1f.2: version 3.0
[    1.258706] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.258810] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    1.258941] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.258951] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    1.258962] ahci 0000:00:1f.2: setting latency timer to 64
[    1.260554] scsi0 : ahci
[    1.260866] scsi1 : ahci
[    1.261145] scsi2 : ahci
[    1.261420] scsi3 : ahci
[    1.261796] ata1: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604500 irq 44
[    1.261806] ata2: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604580 irq 44
[    1.261815] ata3: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604600 irq 44
[    1.261823] ata4: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604680 irq 44
[    1.262997] Fixed MDIO Bus: probed
[    1.263056] tun: Universal TUN/TAP device driver, 1.6
[    1.263062] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.263278] PPP generic driver version 2.4.2
[    1.263675] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.263752] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.263795] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.263804] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.263975] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.264067] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.264086] ehci_hcd 0000:00:1d.7: debug port 1
[    1.267979] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.268041] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0604000
[    1.280063] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.280484] hub 1-0:1.0: USB hub found
[    1.280497] hub 1-0:1.0: 8 ports detected
[    1.280703] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.280746] uhci_hcd: USB Universal Host Controller Interface driver
[    1.280799] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.280818] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.280826] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.281006] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.281065] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    1.281482] hub 2-0:1.0: USB hub found
[    1.281495] hub 2-0:1.0: 2 ports detected
[    1.281645] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.281666] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.281674] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.281847] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.281921] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    1.282322] hub 3-0:1.0: USB hub found
[    1.282334] hub 3-0:1.0: 2 ports detected
[    1.282487] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.282504] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.282512] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.282685] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.282760] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    1.283170] hub 4-0:1.0: USB hub found
[    1.283182] hub 4-0:1.0: 2 ports detected
[    1.283336] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.283354] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.283362] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.283530] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.283602] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    1.284053] hub 5-0:1.0: USB hub found
[    1.284066] hub 5-0:1.0: 2 ports detected
[    1.284366] usbcore: registered new interface driver libusual
[    1.284471] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE1] at 0x60,0x64 irq 1,12
[    1.287796] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.287816] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.288303] mousedev: PS/2 mouse device common for all mice
[    1.289436] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.289490] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.289639] device-mapper: uevent: version 1.0.3
[    1.289902] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.290011] EISA: Probing bus 0 at eisa.0
[    1.290017] EISA: Cannot allocate resource for mainboard
[    1.290023] Cannot allocate resource for EISA slot 1
[    1.290029] Cannot allocate resource for EISA slot 2
[    1.290034] Cannot allocate resource for EISA slot 3
[    1.290039] Cannot allocate resource for EISA slot 4
[    1.290044] Cannot allocate resource for EISA slot 5
[    1.290050] Cannot allocate resource for EISA slot 6
[    1.290055] Cannot allocate resource for EISA slot 7
[    1.290060] Cannot allocate resource for EISA slot 8
[    1.290065] EISA: Detected 0 cards.
[    1.290084] cpufreq-nforce2: No nForce2 chipset.
[    1.290400] cpuidle: using governor ladder
[    1.290904] cpuidle: using governor menu
[    1.290911] EFI Variables Facility v0.08 2004-May-17
[    1.291555] TCP cubic registered
[    1.291878] NET: Registered protocol family 10
[    1.293274] NET: Registered protocol family 17
[    1.293288] Registering the dns_resolver key type
[    1.293340] Using IPI No-Shortcut mode
[    1.293814] PM: Hibernation image not present or could not be loaded.
[    1.293853] registered taskstats version 1
[    1.318967]   Magic number: 8:344:150
[    1.319009] bdi 1:2: hash matches
[    1.319066] acpi INT0800:00: hash matches
[    1.319157] rtc_cmos 00:04: setting system clock to 2012-08-11 23:07:23 UTC (1344726443)
[    1.320726] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.320732] EDD information not available.
[    1.323585] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.580203] ata2: SATA link down (SStatus 0 SControl 300)
[    1.580274] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.580340] ata3: SATA link down (SStatus 0 SControl 300)
[    1.580432] ata4: SATA link down (SStatus 0 SControl 300)
[    1.581519] ata1.00: ATA-8: Hitachi HTS543225A7A384, ESBOA60W, max UDMA/133
[    1.581529] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.582797] ata1.00: configured for UDMA/133
[    1.583201] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54322 ESBO PQ: 0 ANSI: 5
[    1.583673] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.583711] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.583890] sd 0:0:0:0: [sda] Write Protect is off
[    1.583899] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.584085] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.621191]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    1.622678] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.622954] Freeing unused kernel memory: 740k freed
[    1.623620] Write protecting the kernel text: 5816k
[    1.623692] Write protecting the kernel read-only data: 2376k
[    1.623699] NX-protecting the kernel data: 4424k
[    1.671396] udevd[103]: starting version 175
[    1.712129] usb 1-8: new high-speed USB device number 3 using ehci_hcd
[    1.815311] sky2: driver version 1.30
[    1.815506] sky2 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.815604] sky2 0000:09:00.0: setting latency timer to 64
[    1.815789] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
[    1.816774] sky2 0000:09:00.0: irq 45 for MSI/MSI-X
[    1.820902] sky2 0000:09:00.0: eth0: addr 00:24:54:e5:d3:d1
[    2.088140] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[    2.271249] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   13.933512] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.967434] udevd[328]: starting version 175
[   14.019880] lp: driver loaded but no devices found
[   14.088736] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   14.174156] lib80211: common routines for IEEE802.11 drivers
[   14.174167] lib80211_crypt: registered algorithm 'NULL'
[   14.191956] wl: module license 'MIXED/Proprietary' taints kernel.
[   14.191970] Disabling lock debugging due to kernel taint
[   14.201934] [drm] Initialized drm 1.1.0 20060810
[   14.250169] type=1400 audit(1344715656.427:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=426 comm="apparmor_parser"
[   14.251867] type=1400 audit(1344715656.427:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=426 comm="apparmor_parser"
[   14.252910] type=1400 audit(1344715656.431:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=426 comm="apparmor_parser"
[   14.262626] wl 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   14.262652] wl 0000:05:00.0: setting latency timer to 64
[   14.278230] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   14.278258] i915 0000:00:02.0: setting latency timer to 64
[   14.340434] lib80211_crypt: registered algorithm 'TKIP'
[   14.426939] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.38
[   14.434184] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[   14.434204] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   14.434212] [drm] Driver supports precise vblank timestamp query.
[   14.467709] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   14.500438] Bluetooth: Core ver 2.16
[   14.500518] NET: Registered protocol family 31
[   14.500527] Bluetooth: HCI device and connection manager initialized
[   14.500536] Bluetooth: HCI socket layer initialized
[   14.500544] Bluetooth: L2CAP socket layer initialized
[   14.500568] Bluetooth: SCO socket layer initialized
[   14.501682] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   14.510621] usbcore: registered new interface driver btusb
[   14.602003] Linux video capture interface: v2.00
[   14.604833] uvcvideo: Found UVC 1.00 device WebCam SCB-0385N (2232:1005)
[   14.608812] input: WebCam SCB-0385N as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input5
[   14.609358] usbcore: registered new interface driver uvcvideo
[   14.609368] USB Video Class driver (1.1.1)
[   14.721520] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.721531] Bluetooth: BNEP filters: protocol multicast
[   14.731258] ppdev: user-space parallel port driver
[   14.756157] Bluetooth: RFCOMM TTY layer initialized
[   14.756176] Bluetooth: RFCOMM socket layer initialized
[   14.756184] Bluetooth: RFCOMM ver 1.11
[   14.848244] [drm] initialized overlay support
[   14.893986] type=1400 audit(1344715657.071:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=640 comm="apparmor_parser"
[   14.896148] type=1400 audit(1344715657.075:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=640 comm="apparmor_parser"
[   14.937195] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x150b00)
[   14.943153] fbcon: inteldrmfb (fb0) is primary device
[   14.943331] Console: switching to colour frame buffer device 128x37
[   14.943417] fb0: inteldrmfb frame buffer device
[   14.943424] drm: registered panic notifier
[   14.945925] ACPI Warning: _BQC returned an invalid level (20110623/video-480)
[   14.947073] acpi device:04: registered as cooling_device4
[   14.947457] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[   14.950710] ACPI: Video Device [IGD0] (multi-head: yes  rom: no  post: no)
[   14.950991] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   14.951148] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   14.951325] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   14.951412] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   14.966127] samsung_laptop: enabled workaround for brightness stepping quirk
[   14.969062] ACPI: Failed to switch the brightness
[   14.981567] psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x14, 0x0a.
[   15.101940] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[   15.283049] init: failsafe main process (678) killed by TERM signal
[   15.712469] sky2 0000:09:00.0: eth0: enabling interface
[   15.714073] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.719740] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.799405] type=1400 audit(1344715657.975:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=817 comm="apparmor_parser"
[   15.800854] type=1400 audit(1344715657.979:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=818 comm="apparmor_parser"
[   15.802536] type=1400 audit(1344715657.979:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=818 comm="apparmor_parser"
[   15.803488] type=1400 audit(1344715657.979:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=818 comm="apparmor_parser"
[   15.810362] type=1400 audit(1344715657.987:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=821 comm="apparmor_parser"
[   16.045368] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   16.045897] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   16.598359] init: alsa-restore main process (866) terminated with status 99
[   17.316623] init: plymouth-stop pre-start process (1096) terminated with status 1
[   51.185229] CE: hpet increased min_delta_ns to 20113 nsec
[  232.944163] usb 1-3: new high-speed USB device number 4 using ehci_hcd
[ 1137.125416] usb 1-3: USB disconnect, device number 4
[ 1147.280299] usb 1-3: new high-speed USB device number 5 using ehci_hcd
[ 1147.476240] IR NEC protocol handler initialized
[ 1147.482191] dvb_usb_rtl2832u: Unknown symbol __divdi3 (err 0)
[ 1147.482274] dvb_usb_rtl2832u: Unknown symbol __umoddi3 (err 0)
[ 1147.482314] dvb_usb_rtl2832u: Unknown symbol __udivdi3 (err 0)
[ 1147.483306] IR RC5(x) protocol handler initialized
[ 1147.489242] IR RC6 protocol handler initialized
[ 1147.493495] IR JVC protocol handler initialized
[ 1147.498553] IR Sony protocol handler initialized
[ 1147.505105] IR MCE Keyboard/mouse protocol handler initialized
[ 1147.512913] lirc_dev: IR Remote Control driver registered, major 251
[ 1147.514869] IR LIRC bridge handler initialized
[ 1147.569958] dvb_usb_rtl2832u: Unknown symbol __divdi3 (err 0)
[ 1147.570044] dvb_usb_rtl2832u: Unknown symbol __umoddi3 (err 0)
[ 1147.570091] dvb_usb_rtl2832u: Unknown symbol __udivdi3 (err 0)
indrek@indrek-NF110-NF210-NF310:~$


obundra
 Vana Pingviin
Vana Pingviin


Vanus: 50
Liitunud: 04.08.2005
Postitused: 1213
Asukoht: 127.0.0.1
Distributsioon: RHEL, Solaris, Debian, Gentoo
 estonia.gif
postituspostitatud: 12.08.2012, 02:18  postituse pealkiri:  (teema puudub)  
Paar näpukat
Kood:
 sudo apt-get install linux-headers-`uname-r`

"uname-r" vahelt tühik puudu "uname -r"
Kood:
tar xjf rt2832u-3.0.tar.bz2

faili nimest l puudu, "rtl2832u-3.0.tar.bz2"
Proovi kasutada uusimat kernelit või paigata olemasolevat:
https://bugzilla.kernel.org/show_bug.cgi?id=41262

https://build.opensuse.org/package/view_file?file=0001-test-32bit-with-division-wrappers.patch&package=dvb-usb-rtl2832u&project=home%3Apolyconvex&rev=5c6df563ca4efaeef9f11f587c00465f

_________________
IT teenused
Indrekus
 Pingviini külastaja
Pingviini külastaja



Liitunud: 27.11.2009
Postitused: 31

Distributsioon: Linux Mint
 estonia.gif
postituspostitatud: 12.08.2012, 14:27  postituse pealkiri:  (teema puudub)  
Noh neid näpukaid ma enam ei teinud, aga ega sellest midagi ei muutunud ka. No ma ei tea, minu tavakasutajast aju ei suuda vist iseseisvalt seda asja lahendada ka. Saaks kuidagi puust ja punasest ette. http://linbay.blogspot.com/2012/05/hassle-almost-free-rtl2832u-linux.html Selle aadressi õpetuse järgi ma ei oska ühest kohast edasi minna.
$ vi Makefile (to make sure variable INCLUDE_EXTRA_DVB matches your kernel version)
Vot sellest kohast.

Võin õnnelikult tunnistada, et sain ikkagi sellest kohast üle ja pulk näitab pilti ka. Kõigest sellest minu pea nüüd valutab. Tänud neile kes püüdsid aidata. Very Happy


kernull
 Pingviini kasutaja
Pingviini kasutaja



Liitunud: 03.08.2008
Postitused: 58
Asukoht: Tallinn

 estonia.gif
postituspostitatud: 12.08.2012, 18:02  postituse pealkiri:  (teema puudub)  
Seal Makefile-s on kaks rida mainitud muutuja defineerimiseks. 12.04 jaoks on vaja esimese ette trell panna ja teise eest trell ära võtta. S.t. kernel on 3.2.0 variant.
Edasi läks mul libedalt, ja natuke teistsuguse pulgaga (E4000 tüüneriga) võttis korraks pildi ette (kehva signaali pärast ainult korraks)
Aga 1f4d oli ka kataloogist grep-i abil leitav, ja FC0012 tüüneri jaoks on ka failid olemas.


Indrekus
 Pingviini külastaja
Pingviini külastaja



Liitunud: 27.11.2009
Postitused: 31

Distributsioon: Linux Mint
 estonia.gif
postituspostitatud: 12.08.2012, 18:23  postituse pealkiri:  (teema puudub)  
Ma lõpuks sain sellest ise ka aru, et trellide asukoht vaja vahetada. Ma teadsin, et ma pean seal failis midagi muutma, aga ei teadnud, mida. Vot nii pisikese märgi taga mu probleem seisneski ainult. Ja kui kaua mul sellest aru saamiseks aega läks. Jube. Aga kuidas ma selle pildi kaffeines normaalseks saan?
Image


kernull
 Pingviini kasutaja
Pingviini kasutaja



Liitunud: 03.08.2008
Postitused: 58
Asukoht: Tallinn

 estonia.gif
postituspostitatud: 22.08.2012, 02:13  postituse pealkiri:  (teema puudub)  
Indrekus kirjutas:
Aga kuidas ma selle pildi kaffeines normaalseks saan?

Parandad xine-lib paketi ära. See on neil juba paar aastat katki. Paistab, et ta ei saa püstsihis värvi 2-kordse venitamise vajadusest aru (4:2:2 sämpling ilmselt). Võibolla on see ka meie digi-tv striimi eripära. VLC peaks korralikult näitama, mplayeril oli aasta tagasi mingeid muid pretensioone Levira striimile.


akbgf
 Vana Pingviin
Vana Pingviin



Liitunud: 07.10.2009
Postitused: 763
Asukoht: Tõravere
Distributsioon: OpenSUSE, Ubuntu
 estonia.gif
postituspostitatud: 22.08.2012, 07:58  postituse pealkiri:  (teema puudub)  
kernull kirjutas:
VLC peaks korralikult näitama, mplayeril oli aasta tagasi mingeid muid pretensioone Levira striimile.

VLC näitab jah.
Proovisin vist paar aastat tagasi juba ka mplayeriga ETV pilti ette saada, aga ei õnnestunud.
Kuivõrd VLC käib kenasti, siis pole mplayerit rohkem proovinud.


Indrekus
 Pingviini külastaja
Pingviini külastaja



Liitunud: 27.11.2009
Postitused: 31

Distributsioon: Linux Mint
 estonia.gif
postituspostitatud: 22.08.2012, 21:35  postituse pealkiri:  (teema puudub)  
VLC mängijaga on mul ainult see jama, et kui saate pildiformaat muutub 16:9 pealt 4:3 peale või vastupidi, siis mul pilt kinni jääb, aga heli läheb edasi.


Shadow
 Vana Pingviin
Vana Pingviin


Vanus: 50
Liitunud: 16.07.2006
Postitused: 453

Distributsioon: Gentoo
 estonia.gif
postituspostitatud: 23.08.2012, 06:26  postituse pealkiri:  (teema puudub)  
"see" on vist ainult Ubuntul katki. Pole kunagi näinud ei Kaffeinega ega ka VLC -ga eesti üle õhu tuleva digitv -ga anomaaliaid. See siis Gentoo ja FujitsuSiemens -i usb pulk.

_________________
Image
muhv
 Pingviini aktivist
Pingviini aktivist


Vanus: 50
Liitunud: 03.03.2009
Postitused: 248
Asukoht: Pärnu
Distributsioon: Debian+
 estonia.gif
postituspostitatud: 23.08.2012, 13:21  postituse pealkiri:  (teema puudub)  
"see" xine-lib on ka debianis katki. Mina sain endal Me-tv lõpuks normaalselt tööle installides getdeb (http://www.getdeb.net/updates/Ubuntu/11.10/?q=me-tv) paki. See versioon peaks kasutama mingit teist (kas oli vist vlc) lib-i video mängimiseks.


kernull
 Pingviini kasutaja
Pingviini kasutaja



Liitunud: 03.08.2008
Postitused: 58
Asukoht: Tallinn

 estonia.gif
postituspostitatud: 23.08.2012, 13:48  postituse pealkiri:  (teema puudub)  
Shadow kirjutas:
"see" on vist ainult Ubuntul katki. Pole kunagi näinud ei Kaffeinega ega ka VLC -ga eesti üle õhu tuleva digitv -ga anomaaliaid. See siis Gentoo ja FujitsuSiemens -i usb pulk.

SuSe-s on ka, juba hea mitu versiooni järjest.

Väga kasulik oleks teada selle Gentoo xine-lib teegi versiooni, mis toimib.


Shadow
 Vana Pingviin
Vana Pingviin


Vanus: 50
Liitunud: 16.07.2006
Postitused: 453

Distributsioon: Gentoo
 estonia.gif
postituspostitatud: 23.08.2012, 15:17  postituse pealkiri:  (teema puudub)  
Minul on mingi xine-lib-1.2.1-r1. Aga nagu teada Gentoo peal kompileeritakse soft, et sinna on Gentoo projekt lisanud pätsid nimega: ffmpeg-git.patch fix_dvb_crc_checking.patch freebsd.patch. Et äkki need parandavadki selle buugi.


kernull
 Pingviini kasutaja
Pingviini kasutaja



Liitunud: 03.08.2008
Postitused: 58
Asukoht: Tallinn

 estonia.gif
postituspostitatud: 25.08.2012, 02:58  postituse pealkiri:  (teema puudub)  
Shadow kirjutas:
Minul on mingi xine-lib-1.2.1-r1. Aga nagu teada Gentoo peal kompileeritakse soft, et sinna on Gentoo projekt lisanud pätsid nimega: ffmpeg-git.patch fix_dvb_crc_checking.patch freebsd.patch. Et äkki need parandavadki selle buugi.
See on hea uudis. Ilmselt on siis xine-lib-1.2.1 paiku asi korda tehtud. Archlinuxi 1.2.2 versiooniga mängib ka korralikult.
Proovisin Ubuntu 12.04-s libxine2-1.2.0 peale algtekstist kaffeine kompileerida, olles enne k6ik libxine1 osad välja rookinud. Kahjuks mängis see ikka pooleldi rohelist pilti.


Kakaduu
 Pingviini aktivist
Pingviini aktivist


Vanus: 79
Liitunud: 26.05.2008
Postitused: 117
Asukoht: Vändra mets

 estonia.gif
postituspostitatud: 18.09.2012, 16:05  postituse pealkiri:  (teema puudub)  
Ubuntu 12.10 all näitab Me-Tv suurepäraselt tavalisi õhulevi kanaleid.
Mul on Fujitsu DVB-T pulk, mille arvuti tunneb ära kui Synapticust on arvutisse laetud linux-firmware-nonfree.
Kanalite otsingu maana olen pannud Lithuania.


Indrekus
 Pingviini külastaja
Pingviini külastaja



Liitunud: 27.11.2009
Postitused: 31

Distributsioon: Linux Mint
 estonia.gif
postituspostitatud: 13.01.2013, 10:27  postituse pealkiri:  (teema puudub)  
Indrekus kirjutas:
VLC mängijaga on mul ainult see jama, et kui saate pildiformaat muutub 16:9 pealt 4:3 peale või vastupidi, siis mul pilt kinni jääb, aga heli läheb edasi.


Leidsin internetist ka ka sellele probleemile lahenduse. VLC mängijal videokoodekite all tuli ffmpeg threads panna 1. Nüüd enam pilt kinni ei jää kui muutub 16:9 pealt 4:3 peale ja vastupidi. Ilusti muudab kohe kuvasuhte ära. Vähemalt minul see töötab veel esialgu.


hirax
 Pingviini aktivist
Pingviini aktivist


Vanus: 54
Liitunud: 25.10.2013
Postitused: 266
Asukoht: maal ja merel
Distributsioon: KDE Neon 5.27, Linux Lite
 estonia.gif
postituspostitatud: 29.10.2013, 17:09  postituse pealkiri:  (teema puudub)  
kernull kirjutas:
Indrekus kirjutas:
Aga kuidas ma selle pildi kaffeines normaalseks saan?

Parandad xine-lib paketi ära. See on neil juba paar aastat katki. Paistab, et ta ei saa püstsihis värvi 2-kordse venitamise vajadusest aru (4:2:2 sämpling ilmselt). Võibolla on see ka meie digi-tv striimi eripära. VLC peaks korralikult näitama, mplayeril oli aasta tagasi mingeid muid pretensioone Levira striimile.

Tere,
Kuidas seda xine-lib paketti parandada ?
Mul Estobuntu 12.08 on pilt nii Kaffeine kui ka MeTV-ga selline ebanormaalne.
Üks iseärasus on see, et kanali France24 pilt on korralik ja Eesti kanalid kõik nässus.


muhv
 Pingviini aktivist
Pingviini aktivist


Vanus: 50
Liitunud: 03.03.2009
Postitused: 248
Asukoht: Pärnu
Distributsioon: Debian+
 estonia.gif
postituspostitatud: 30.10.2013, 11:41  postituse pealkiri:  (teema puudub)  
hirax kirjutas:
kernull kirjutas:
Indrekus kirjutas:
Aga kuidas ma selle pildi kaffeines normaalseks saan?

Parandad xine-lib paketi ära. See on neil juba paar aastat katki. Paistab, et ta ei saa püstsihis värvi 2-kordse venitamise vajadusest aru (4:2:2 sämpling ilmselt). Võibolla on see ka meie digi-tv striimi eripära. VLC peaks korralikult näitama, mplayeril oli aasta tagasi mingeid muid pretensioone Levira striimile.

Tere,
Kuidas seda xine-lib paketti parandada ?
Mul Estobuntu 12.08 on pilt nii Kaffeine kui ka MeTV-ga selline ebanormaalne.
Üks iseärasus on see, et kanali France24 pilt on korralik ja Eesti kanalid kõik nässus.


Me-tv Getdeb-i 2.0 versiooni alla laadida praegu ei õnnestunud. Võid ju proovida ise kokku klopsida libvlc teegil. Siis peaks me-tv-l roheline riba ära kaduma. Õpetus: http://verahill.blogspot.com/2012/05/compiling-me-tv-14-on-debian.html


hirax
 Pingviini aktivist
Pingviini aktivist


Vanus: 54
Liitunud: 25.10.2013
Postitused: 266
Asukoht: maal ja merel
Distributsioon: KDE Neon 5.27, Linux Lite
 estonia.gif
postituspostitatud: 30.10.2013, 15:51  postituse pealkiri:  (teema puudub)  
Tänan,
Mul ei õnnestu samuti GetDeb 2-e allalaadimine. Proovin hiljem veel.
Ise "kokku klopsimine" on mulle natuke võõras teema veel - ma selle jaoks liiga algaja. (alles poolteist nädalat "katsetan" linux-it Smile )
Muidu selle xine-lib kohta leidsin sellise õpetuse: http://www.xine-project.org/faq#building
See jutt ka väidetavalt algajatele, aga mulle ikkagi natuke keeruline veel.

Praegu sain DigiTV VLC-ga vaatamise tööle, aga sellega tundub pildikvaliteet mitte kõige parem olevat ja kipub reklaamide-saadete vahetuse momendil pildi kinni kiiluma. Korraks kanali vahetamine aitab, aga üsna tüütu on.

Siis veel üks küsimus seoses Fujitsu Slim Mobile digipulgaga seoses.
Vaatasin dmesg logi ja kas ma saan nendest kirjetest õigesti aru, et süsteem on ära tundnud ja on valmis selle Fujitsu pulga juhtimiseks puldiga ??
Väljavõte dmesg-ist:
Tsitaat:
[ 24.972339] Registered IR keymap rc-empty
[ 24.972427] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2.2/rc/rc0/input12
[ 24.972981] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2.2/rc/rc0
[ 24.972985] dvb-usb: schedule remote query interval to 500 msecs.
[ 24.972990] dvb-usb: Fujitsu-Siemens Slim Mobile USB DVB-T successfully initialized and connected.
[ 24.981952] usbcore: registered new interface driver dvb_usb_af9015


muhv
 Pingviini aktivist
Pingviini aktivist


Vanus: 50
Liitunud: 03.03.2009
Postitused: 248
Asukoht: Pärnu
Distributsioon: Debian+
 estonia.gif
postituspostitatud: 30.10.2013, 18:04  postituse pealkiri:  (teema puudub)  
Kokku klopsimine on põhimõtteliselt õpetuse järgi terminali käskude copy paste tegemine.
Aga võid prooviks lisada ka arendusrepo ( https://launchpad.net/~me-tv-development/+archive/ppa?field.series_filter=precise ). Käsk terminalis:

sudo add-apt-repository ppa:me-tv-development/ppa

ja selle kaudu uuendada . Seal peaks olema juba 1.4 versioon.


kdrk1
 Pingviini kasutaja
Pingviini kasutaja


Vanus: 35
Liitunud: 11.03.2009
Postitused: 37

Distributsioon: Ubuntu
 estonia.gif
postituspostitatud: 30.10.2013, 18:55  postituse pealkiri:  (teema puudub)  
hirax kirjutas:

Praegu sain DigiTV VLC-ga vaatamise tööle, aga sellega tundub pildikvaliteet mitte kõige parem olevat ja kipub reklaamide-saadete vahetuse momendil pildi kinni kiiluma. Korraks kanali vahetamine aitab, aga üsna tüütu on.

Tools -> Preferences -> Show setting - All -> Input/Codecs -> Video codecs -> FFmpeg -> Threads = 1
Siis ei peaks enam pilt "kinni kiiluma"


Näita (aja järgi):      
Postita uus teemaVasta teemale Pingviini veeb foorumi pealeht » Linux » Linux - raud » Digi tv linuxis
Mine lehele Eelmine  1, 2, 3, 4, 5, 6, 7, 8  Järgmine

Vaata järgmist teemat
Vaata eelmist teemat

Powered by phpBB2 Plus based on phpBB © 2001/7 phpBB Group