Portaal Portaal Pingviini veeb foorumi pealeht
  Viki  |  IRC  |  Otsing  |  Küsimused ja vastused  |  Profiil  |  Privaatsõnumite vaatamiseks logi sisse  | Logi sisse või Registreeru
<empty>
Vaata järgmist teemat
Vaata eelmist teemat

Postita uus teemaVasta teemale
Autor Sõnum
bbad
Pingviini kasutaja
Pingviini kasutaja


Vanus: 46
Liitunud: 16.02.2007
Postitused: 53
Asukoht: Ida-Virumaa
Distributsioon: openSuse 11.4
estonia.gif
postituspostitatud: 28.06.2011, 22:11  postituse pealkiri:  USB netipulga installimine  

Tere!
Tekkis tõrge Elisa mint netipulga installimisega (loe: ei saa hakkama)
Süsteemiks openSuse 11.4
Netipulgaks Huawei E153
Nii palju ma leidsin, et mul on vaja järgnevaid programme, mis sai ka tar.bz2 tõmmatud:
usb-modeswitch-data
usb-modeswitch
libusb
Siinkohal tekkiski tõrge, et kuidas need nüüd ilusti ja kenasti saaks ära installitud...


Skorzeny
Pingviini aktivist
Pingviini aktivist



Liitunud: 30.06.2007
Postitused: 357

Distributsioon: /LinuxMint Mate19.3/Kali Linux
burkinafaso.gif
postituspostitatud: 28.06.2011, 22:21  postituse pealkiri:  Re: USB netipulga installimine  

bbad kirjutas:
Tere!
Tekkis tõrge Elisa mint netipulga installimisega (loe: ei saa hakkama)
Süsteemiks openSuse 11.4
Netipulgaks Huawei E153
Nii palju ma leidsin, et mul on vaja järgnevaid programme, mis sai ka tar.bz2 tõmmatud:
usb-modeswitch-data
usb-modeswitch
libusb
Siinkohal tekkiski tõrge, et kuidas need nüüd ilusti ja kenasti saaks ära installitud...

Kas on mingi erilne põhjus ,et sa Yast'i ei kasuta ja üritad ise kompileerida?

_________________
Image

mihkel
Vana Pingviin
Vana Pingviin



Liitunud: 16.04.2006
Postitused: 1284

Distributsioon: Fedora/Centos
estonia.gif
postituspostitatud: 28.06.2011, 22:24  postituse pealkiri:  (teema puudub)  

Tõenäoliselt tirisid alla lähtekoodi. Selleks, et neid paigaldada, pead nad kompileerima. Parem ürita need pakid YAST-i kaudu installida või käsurealt kasutades zypperit.
zypper install usb-modeswitch


bbad
Pingviini kasutaja
Pingviini kasutaja


Vanus: 46
Liitunud: 16.02.2007
Postitused: 53
Asukoht: Ida-Virumaa
Distributsioon: openSuse 11.4
estonia.gif
postituspostitatud: 29.06.2011, 09:08  postituse pealkiri:  (teema puudub)  

Yastiga see mure, et millegipärast ei lähe suse automaatselt kaabliga netti ja ta ei saa asju netist tõmmata. Ma ei kujuta ette, miks ta netti ei lähe, teiste linuxitega pole sellist probleemi nagu täheldanud


mihkel
Vana Pingviin
Vana Pingviin



Liitunud: 16.04.2006
Postitused: 1284

Distributsioon: Fedora/Centos
estonia.gif
postituspostitatud: 29.06.2011, 11:21  postituse pealkiri:  (teema puudub)  

Oot-oot. Linuxiga sa ei saa nettigi? Siis lahenda kõigepealt interneti probleem ära.
Alustuseks võid pajatada, mismoodi sul internet masinasse tuleb, mis ISP, on mingi ruuter vahel.
Siis võid anda järgmiste käskude väljundid:
# ifconfig -a
# dhclient eth0

# - tähendab juurkasutajana


bbad
Pingviini kasutaja
Pingviini kasutaja


Vanus: 46
Liitunud: 16.02.2007
Postitused: 53
Asukoht: Ida-Virumaa
Distributsioon: openSuse 11.4
estonia.gif
postituspostitatud: 29.06.2011, 12:16  postituse pealkiri:  (teema puudub)  

Ei ole modemit, kaabel tuleb tuppa trepikojast Smile

ISP: Elion Enterprises Limited
Connection: Broadband
Proxy: None Detected
Assignment: Static IP

Nii palju infot oskan öelda

linux-mltw:/home/bbad # ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:90:F5:8F:94:11
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:19 Base address:0xdead

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:122 errors:0 dropped:0 overruns:0 frame:0
TX packets:122 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:10447 (10.2 Kb) TX bytes:10447 (10.2 Kb)

wlan0 Link encap:Ethernet HWaddr 00:22:43:0E:9D:5E
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

linux-mltw:/home/bbad # dhclient eth0
ls: cannot access /var/run/netconfig/eth0/: No such file or directory


mihkel
Vana Pingviin
Vana Pingviin



Liitunud: 16.04.2006
Postitused: 1284

Distributsioon: Fedora/Centos
estonia.gif
postituspostitatud: 29.06.2011, 12:37  postituse pealkiri:  (teema puudub)  

Anna lspci väljund ka.

-e
Kui juba, siis juba
Anna ka lsmod ja dmesg, kui kaabel on taga ja pane kogu info code täägide vahele.


bbad
Pingviini kasutaja
Pingviini kasutaja


Vanus: 46
Liitunud: 16.02.2007
Postitused: 53
Asukoht: Ida-Virumaa
Distributsioon: openSuse 11.4
estonia.gif
postituspostitatud: 29.06.2011, 12:58  postituse pealkiri:  (teema puudub)  

ispci ja ismod peale ütles terminal a la command-not-found
dmesg tuli välja küll:
Kood:

linux-mltw:/home/bbad # dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37.1-1.2-desktop (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP PREEMPT 2011-02-21 10:34:10 +0100
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bef90000 (usable)
[ 0.000000] BIOS-e820: 00000000bef90000 - 00000000bef9b000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bef9b000 - 00000000bef9c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bef9c000 - 00000000bf000000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: clevo M7x0S /M7x0S , BIOS 6.00 10/02/0892
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FE0000000 write-back
[ 0.000000] 3 base 120000000 mask FF0000000 write-back
[ 0.000000] 4 base 130000000 mask FF8000000 write-back
[ 0.000000] 5 base 0BFE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bfe00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00f8040] f8040
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] initial memory mapped : 0 - 01000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000371fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00371fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 371fe000 @ ff6000-1000000
[ 0.000000] RAMDISK: 37573000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 36781000 - 371fd7de
[ 0.000000] Move RAMDISK from 0000000037573000 - 0000000037fef7dd to 36781000 - 371fd7dd
[ 0.000000] ACPI: RSDP 000f7f90 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT bef928cd 00084 (v01 PTLTD XSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP bef9ae72 000F4 (v03 SiS 671MX 06040000 PTL 000F4240)
[ 0.000000] ACPI: DSDT bef9691c 044E2 (v01 PTLTD 671 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS bef9bfc0 00040
[ 0.000000] ACPI: APIC bef9af66 0005E (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG bef9afc4 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT bef941f5 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT bef9414f 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT bef940a9 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT bef94003 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT bef93f5d 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT bef93eb7 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT bef93e11 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT bef93d6b 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT bef92951 0141A (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] could not find any ACPI SRAT memory areas.
[ 0.000000] failed to get NUMA memory information from SRAT table
[ 0.000000] NUMA - single node, flat memory mode
[ 0.000000] Node: 0, start_pfn: 0, end_pfn: 138000
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 5c000 60000 64000 68000 6c000 70000 74000 78000 7c000 80000 84000 88000 8c000 90000 94000 98000 9c000 a0000 a4000 a8000 ac000 b0000 b4000 b8000 bc000 c0000 c4000 c8000 cc000 d0000 d4000 d8000 dc000 e0000 e4000 e8000 ec000 f0000 f4000 f8000 fc000 100000 104000 108000 10c000 110000 114000 118000 11c000 120000 124000 128000 12c000 130000 134000
[ 0.000000] node 0 pfn: [0 - 138000]
[ 0.000000] Reserving 10240 pages of KVA for lmem_map of node 0 at 135800
[ 0.000000] Reserving total of 2800 pages for numa KVA remap
[ 0.000000] kva_start_pfn ~ 33e00 max_low_pfn ~ 371fe
[ 0.000000] max_pfn = 138000
[ 0.000000] 4110MB HIGHMEM available.
[ 0.000000] 881MB LOWMEM available.
[ 0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe
[ 0.000000] Low memory ends at vaddr f71fe000
[ 0.000000] node 0 will remap to vaddr f3e00000 - f6600000
[ 0.000000] allocate_pgdat: node 0 NODE_DATA f3e00000
[ 0.000000] remap_numa_kva: node 0
[ 0.000000] remap_numa_kva: f3e00000 to pfn 00135800
[ 0.000000] remap_numa_kva: f4000000 to pfn 00135a00
[ 0.000000] remap_numa_kva: f4200000 to pfn 00135c00
[ 0.000000] remap_numa_kva: f4400000 to pfn 00135e00
[ 0.000000] remap_numa_kva: f4600000 to pfn 00136000
[ 0.000000] remap_numa_kva: f4800000 to pfn 00136200
[ 0.000000] remap_numa_kva: f4a00000 to pfn 00136400
[ 0.000000] remap_numa_kva: f4c00000 to pfn 00136600
[ 0.000000] remap_numa_kva: f4e00000 to pfn 00136800
[ 0.000000] remap_numa_kva: f5000000 to pfn 00136a00
[ 0.000000] remap_numa_kva: f5200000 to pfn 00136c00
[ 0.000000] remap_numa_kva: f5400000 to pfn 00136e00
[ 0.000000] remap_numa_kva: f5600000 to pfn 00137000
[ 0.000000] remap_numa_kva: f5800000 to pfn 00137200
[ 0.000000] remap_numa_kva: f5a00000 to pfn 00137400
[ 0.000000] remap_numa_kva: f5c00000 to pfn 00137600
[ 0.000000] remap_numa_kva: f5e00000 to pfn 00137800
[ 0.000000] remap_numa_kva: f6000000 to pfn 00137a00
[ 0.000000] remap_numa_kva: f6200000 to pfn 00137c00
[ 0.000000] remap_numa_kva: f6400000 to pfn 00137e00
[ 0.000000] High memory starts at vaddr f71fe000
[ 0.000000] mapped low ram: 0 - 371fe000
[ 0.000000] low ram: 0 - 371fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000371fe
[ 0.000000] HighMem 0x000371fe -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000bef90
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] On node 0 totalpages: 1011485
[ 0.000000] free_area_init_node: node 0, pgdat f3e00000, node_mem_map f3e02200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1732 pages used for memmap
[ 0.000000] Normal zone: 219962 pages, LIFO batch:31
[ 0.000000] HighMem zone: 8221 pages used for memmap
[ 0.000000] HighMem zone: 777589 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:8
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f3c00000 s28160 r0 d20992 u1048576
[ 0.000000] pcpu-alloc: s28160 r0 d20992 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1001500
[ 0.000000] Policy zone: HighMem
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-FUJITSU_MHY2200BH_K43BT872FWEE-part6 resume=/dev/disk/by-id/ata-FUJITSU_MHY2200BH_K43BT872FWEE-part5 splash=silent quiet vga=0x317
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 25558720 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000371fe:00138000)
[ 0.000000] Memory: 3917624k/5111808k available (4699k kernel code, 87356k reserved, 3490k data, 452k init, 3102280k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff5b4000 - 0xfffff000 (10540 kB)
[ 0.000000] pkmap : 0xff200000 - 0xff400000 (2048 kB)
[ 0.000000] vmalloc : 0xf79fe000 - 0xff1fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf71fe000 ( 881 MB)
[ 0.000000] .init : 0xc0a00000 - 0xc0a71000 ( 452 kB)
[ 0.000000] .data : 0xc0696c5d - 0xc09ff508 (3490 kB)
[ 0.000000] .text : 0xc0200000 - 0xc0696c5d (4699 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:8448 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f1c0c000 soft=f1c0e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1833.616 MHz processor.
[ 0.001015] Calibrating delay loop (skipped), value calculated using timer frequency.. 3667.23 BogoMIPS (lpj=1833616)
[ 0.001024] pid_max: default: 32768 minimum: 301
[ 0.001132] Security Framework initialized
[ 0.001174] AppArmor: AppArmor initialized
[ 0.001310] Mount-cache hash table entries: 512
[ 0.001609] Initializing cgroup subsys ns
[ 0.001616] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.001622] Initializing cgroup subsys cpuacct
[ 0.001631] Initializing cgroup subsys memory
[ 0.001659] Initializing cgroup subsys devices
[ 0.001665] Initializing cgroup subsys freezer
[ 0.001670] Initializing cgroup subsys net_cls
[ 0.001675] Initializing cgroup subsys blkio
[ 0.002075] CPU: Physical Processor ID: 0
[ 0.002079] CPU: Processor Core ID: 0
[ 0.002085] mce: CPU supports 6 MCE banks
[ 0.002102] CPU0: Thermal monitoring enabled (TM1)
[ 0.002112] using mwait in idle threads.
[ 0.002134] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.002146] PEBS disabled due to CPU errata.
[ 0.002154] ... version: 2
[ 0.002156] ... bit width: 40
[ 0.002160] ... generic registers: 2
[ 0.002162] ... value mask: 000000ffffffffff
[ 0.002166] ... max period: 000000007fffffff
[ 0.002167] ... fixed-purpose events: 3
[ 0.002171] ... event mask: 0000000700000003
[ 0.003176] ACPI: Core revision 20101013
[ 0.022119] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.023015] Mapping cpu 0 to node 0
[ 0.023180] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.033189] CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d
[ 0.036049] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.040021] CPU 1 irqstacks, hard=f1cc0000 soft=f1cc2000
[ 0.040026] Booting Node 0, Processors #1 Ok.
[ 0.001999] Initializing CPU#1
[ 0.001999] Mapping cpu 1 to node 0
[ 0.112042] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.113010] Brought up 2 CPUs
[ 0.113013] Total of 2 processors activated (7334.04 BogoMIPS).
[ 0.113559] devtmpfs: initialized
[ 0.114032] regulator: core version 0.5
[ 0.114095] regulator: dummy:
[ 0.114115] Time: 13:48:34 Date: 06/29/11
[ 0.114188] NET: Registered protocol family 16
[ 0.114445] ACPI: bus type pci registered
[ 0.114560] PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xe0000000-0xe02fffff] (base 0xe0000000)
[ 0.114564] PCI: MMCONFIG at [mem 0xe0000000-0xe02fffff] reserved in E820
[ 0.114566] PCI: Using MMCONFIG for extended config space
[ 0.114568] PCI: Using configuration type 1 for base access
[ 0.115645] bio: create slab <bio-0> at 0
[ 0.117412] ACPI: EC: Look up EC in DSDT
[ 0.122301] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.124036] ACPI: SSDT bef94d0f 00258 (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.124391] ACPI: Dynamic OEM Table Load:
[ 0.124395] ACPI: SSDT (null) 00258 (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.125486] ACPI: SSDT bef94454 00518 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 0.125898] ACPI: Dynamic OEM Table Load:
[ 0.125902] ACPI: SSDT (null) 00518 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 0.126731] ACPI: SSDT bef94f67 001A9 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.127088] ACPI: Dynamic OEM Table Load:
[ 0.127092] ACPI: SSDT (null) 001A9 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.127467] ACPI: SSDT bef9496c 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 0.127793] ACPI: Dynamic OEM Table Load:
[ 0.127797] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 0.131067] ACPI: Interpreter enabled
[ 0.131081] ACPI: (supports S0 S3 S4 S5)
[ 0.131108] ACPI: Using IOAPIC for interrupt routing
[ 0.139518] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.139555] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.139590] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.139625] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.139660] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.139695] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.139730] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.139765] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.140029] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.140242] ACPI: No dock devices found.
[ 0.140249] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.141154] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.142936] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.142940] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.142943] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.142947] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffedffff] (ignored)
[ 0.142950] pci_root PNP0A03:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)
[ 0.142953] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.142956] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.142959] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.142962] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
[ 0.142982] pci 0000:00:00.0: [1039:0671] type 0 class 0x000600
[ 0.142995] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff]
[ 0.143062] pci 0000:00:01.0: [1039:0003] type 1 class 0x000604
[ 0.143107] pci 0000:00:02.0: [1039:0968] type 0 class 0x000601
[ 0.143197] pci 0000:00:02.5: [1039:5513] type 0 class 0x000101
[ 0.143220] pci 0000:00:02.5: reg 10: [io 0x01f0-0x01f7]
[ 0.143231] pci 0000:00:02.5: reg 14: [io 0x03f4-0x03f7]
[ 0.143242] pci 0000:00:02.5: reg 18: [io 0x0170-0x0177]
[ 0.143254] pci 0000:00:02.5: reg 1c: [io 0x0374-0x0377]
[ 0.143265] pci 0000:00:02.5: reg 20: [io 0x1080-0x108f]
[ 0.143304] pci 0000:00:02.5: PME# supported from D3cold
[ 0.143309] pci 0000:00:02.5: PME# disabled
[ 0.143328] pci 0000:00:03.0: [1039:7001] type 0 class 0x000c03
[ 0.143343] pci 0000:00:03.0: reg 10: [mem 0xd8104000-0xd8104fff]
[ 0.143410] pci 0000:00:03.1: [1039:7001] type 0 class 0x000c03
[ 0.143424] pci 0000:00:03.1: reg 10: [mem 0xd8105000-0xd8105fff]
[ 0.143497] pci 0000:00:03.3: [1039:7002] type 0 class 0x000c03
[ 0.143515] pci 0000:00:03.3: reg 10: [mem 0xd8106000-0xd8106fff]
[ 0.143585] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.143590] pci 0000:00:03.3: PME# disabled
[ 0.143613] pci 0000:00:04.0: [1039:0191] type 0 class 0x000200
[ 0.143632] pci 0000:00:04.0: reg 10: [mem 0xd8307000-0xd830707f]
[ 0.143643] pci 0000:00:04.0: reg 14: [io 0x1000-0x107f]
[ 0.143705] pci 0000:00:04.0: supports D1 D2
[ 0.143708] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.143713] pci 0000:00:04.0: PME# disabled
[ 0.143732] pci 0000:00:05.0: [1039:1183] type 0 class 0x000101
[ 0.143750] pci 0000:00:05.0: reg 10: [io 0x10c8-0x10cf]
[ 0.143761] pci 0000:00:05.0: reg 14: [io 0x10bc-0x10bf]
[ 0.143772] pci 0000:00:05.0: reg 18: [io 0x10c0-0x10c7]
[ 0.143783] pci 0000:00:05.0: reg 1c: [io 0x10b8-0x10bb]
[ 0.143794] pci 0000:00:05.0: reg 20: [io 0x10a0-0x10af]
[ 0.143833] pci 0000:00:05.0: PME# supported from D3cold
[ 0.143838] pci 0000:00:05.0: PME# disabled
[ 0.143861] pci 0000:00:06.0: [1039:000a] type 1 class 0x000604
[ 0.143935] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.143940] pci 0000:00:06.0: PME# disabled
[ 0.143972] pci 0000:00:07.0: [1039:000a] type 1 class 0x000604
[ 0.144049] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.144054] pci 0000:00:07.0: PME# disabled
[ 0.144082] pci 0000:00:09.0: [1524:0730] type 0 class 0x000501
[ 0.144102] pci 0000:00:09.0: reg 10: [mem 0x00007400-0x0000747f]
[ 0.144174] pci 0000:00:09.0: supports D1 D2
[ 0.144177] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot
[ 0.144182] pci 0000:00:09.0: PME# disabled
[ 0.144201] pci 0000:00:09.1: [1524:0750] type 0 class 0x000805
[ 0.144221] pci 0000:00:09.1: reg 10: [mem 0x00000000-0x000000ff]
[ 0.144293] pci 0000:00:09.1: supports D1 D2
[ 0.144296] pci 0000:00:09.1: PME# supported from D0 D1 D2 D3hot
[ 0.144301] pci 0000:00:09.1: PME# disabled
[ 0.144321] pci 0000:00:09.3: [1524:0751] type 0 class 0x000501
[ 0.144340] pci 0000:00:09.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.144412] pci 0000:00:09.3: supports D1 D2
[ 0.144415] pci 0000:00:09.3: PME# supported from D0 D1 D2 D3hot
[ 0.144420] pci 0000:00:09.3: PME# disabled
[ 0.144452] pci 0000:00:0f.0: [1039:7502] type 0 class 0x000403
[ 0.144471] pci 0000:00:0f.0: reg 10: [mem 0xd8100000-0xd8103fff]
[ 0.144543] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
[ 0.144548] pci 0000:00:0f.0: PME# disabled
[ 0.144601] pci 0000:01:00.0: [1039:6351] type 0 class 0x000300
[ 0.144618] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.144627] pci 0000:01:00.0: reg 14: [mem 0xd8000000-0xd801ffff]
[ 0.144636] pci 0000:01:00.0: reg 18: [io 0x9000-0x907f]
[ 0.144681] pci 0000:01:00.0: supports D1 D2
[ 0.144721] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.144726] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.144731] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xd80fffff]
[ 0.144736] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff pref]
[ 0.144795] pci 0000:00:06.0: PCI bridge to [bus 09-0a]
[ 0.144803] pci 0000:00:06.0: bridge window [io 0x3000-0x4fff]
[ 0.144808] pci 0000:00:06.0: bridge window [mem 0xdc000000-0xdfffffff]
[ 0.144816] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.144874] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 0.144882] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.144887] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.144895] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.144916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.155851] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11)
[ 0.155965] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11)
[ 0.156082] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 9 10 11)
[ 0.156192] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11)
[ 0.156334] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11)
[ 0.156444] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11)
[ 0.156553] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *7 9 10 11)
[ 0.156663] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[ 0.156722] HEST: Table is not found!
[ 0.156991] SCSI subsystem initialized
[ 0.157027] libata version 3.00 loaded.
[ 0.157119] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.157122] vgaarb: loaded
[ 0.157160] usbcore: registered new interface driver usbfs
[ 0.157183] usbcore: registered new interface driver hub
[ 0.157193] usbcore: registered new device driver usb
[ 0.157193] PCI: Using ACPI for IRQ routing
[ 0.157193] PCI: pci_cache_line_size set to 64 bytes
[ 0.157193] pci 0000:00:09.0: address space collision: [mem 0x00007400-0x0000747f] conflicts with reserved [mem 0x00000000-0x0000ffff]
[ 0.157193] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.157193] reserve RAM buffer: 00000000bef90000 - 00000000bfffffff
[ 0.157258] NetLabel: Initializing
[ 0.157260] NetLabel: domain hash size = 128
[ 0.157262] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.157277] NetLabel: unlabeled traffic allowed by default
[ 0.157297] Switching to clocksource tsc
[ 0.158831] AppArmor: AppArmor Filesystem Enabled
[ 0.158840] pnp: PnP ACPI init
[ 0.158863] ACPI: bus type pnp registered
[ 0.160183] pnp 00:00: [bus 00-ff]
[ 0.160187] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.160193] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.160196] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.160199] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.160202] pnp 00:00: [mem 0xc0000000-0xffedffff window]
[ 0.160205] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.160208] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.160211] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.160214] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.160217] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.160220] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.160223] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.160226] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.160229] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.160232] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.160235] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.160238] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.160307] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.160633] pnp 00:01: [io 0x0000-0x000f]
[ 0.160636] pnp 00:01: [io 0x0081-0x008f]
[ 0.160639] pnp 00:01: [io 0x00c0-0x00df]
[ 0.160641] pnp 00:01: [io 0x0480-0x048f]
[ 0.160645] pnp 00:01: [dma 4]
[ 0.160699] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.160747] pnp 00:02: [io 0x0070-0x0071]
[ 0.160806] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.160820] pnp 00:03: [io 0x0061]
[ 0.160874] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.160965] pnp 00:04: [io 0x8000-0x80be]
[ 0.160968] pnp 00:04: [io 0x8100-0x812f]
[ 0.160971] pnp 00:04: [io 0x0080]
[ 0.160973] pnp 00:04: [io 0x04d0-0x04d1]
[ 0.160976] pnp 00:04: [io 0xfe00]
[ 0.160978] pnp 00:04: [io 0x002e]
[ 0.160981] pnp 00:04: [io 0x002f]
[ 0.160983] pnp 00:04: [io 0x0092]
[ 0.160986] pnp 00:04: [io 0x0072-0x0073]
[ 0.160988] pnp 00:04: [io 0x0078-0x0079]
[ 0.160991] pnp 00:04: [io 0x004e-0x004f]
[ 0.160993] pnp 00:04: [io 0x0068]
[ 0.160996] pnp 00:04: [io 0x006c]
[ 0.160998] pnp 00:04: [io 0x0261]
[ 0.161001] pnp 00:04: [io 0x0200-0x020f]
[ 0.161003] pnp 00:04: [io 0x0400-0x040f]
[ 0.161006] pnp 00:04: [mem 0xe0000000-0xefffffff]
[ 0.161009] pnp 00:04: [mem 0xfec00000-0xfecfffff]
[ 0.161012] pnp 00:04: [mem 0xfee00000-0xfeefffff]
[ 0.161015] pnp 00:04: [mem 0xffb80000-0xffbfffff]
[ 0.161017] pnp 00:04: [mem 0xffc00000-0xffc00fff]
[ 0.161020] pnp 00:04: [mem 0xffe00000-0xffe00fff]
[ 0.161023] pnp 00:04: [mem 0xffe80000-0xffefffff]
[ 0.161119] pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.161144] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.161158] pnp 00:05: [irq 13]
[ 0.161216] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.161250] pnp 00:06: [irq 12]
[ 0.161306] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.161321] pnp 00:07: [mem 0xfec00000-0xfecfffff]
[ 0.161324] pnp 00:07: [mem 0xfee00000-0xfeefffff]
[ 0.161327] pnp 00:07: [mem 0xffc00000-0xffc00fff]
[ 0.161330] pnp 00:07: [mem 0xffe00000-0xffe00fff]
[ 0.161394] pnp 00:07: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.161531] pnp 00:08: [irq 0 disabled]
[ 0.161537] pnp 00:08: [irq 8]
[ 0.161540] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.161600] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.161616] pnp 00:09: [io 0x0060]
[ 0.161620] pnp 00:09: [io 0x0064]
[ 0.161626] pnp 00:09: [irq 1]
[ 0.161683] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.161935] pnp: PnP ACPI: found 10 devices
[ 0.161938] ACPI: ACPI bus type pnp unregistered
[ 0.161952] system 00:04: [io 0x8000-0x80be] has been reserved
[ 0.161956] system 00:04: [io 0x8100-0x812f] has been reserved
[ 0.161959] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.161963] system 00:04: [io 0xfe00] has been reserved
[ 0.161967] system 00:04: [io 0x0261] has been reserved
[ 0.161970] system 00:04: [io 0x0200-0x020f] has been reserved
[ 0.161973] system 00:04: [io 0x0400-0x040f] has been reserved
[ 0.161978] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.161982] system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.161985] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.161989] system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.161993] system 00:04: [mem 0xffc00000-0xffc00fff] has been reserved
[ 0.161996] system 00:04: [mem 0xffe00000-0xffe00fff] has been reserved
[ 0.162000] system 00:04: [mem 0xffe80000-0xffefffff] has been reserved
[ 0.199313] pci 0000:00:06.0: BAR 15: assigned [mem 0xd8400000-0xd85fffff 64bit pref]
[ 0.199321] pci 0000:00:07.0: BAR 14: assigned [mem 0xd8600000-0xd87fffff]
[ 0.199329] pci 0000:00:07.0: BAR 15: assigned [mem 0xd8800000-0xd89fffff 64bit pref]
[ 0.199334] pci 0000:00:07.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.199341] pci 0000:00:09.1: BAR 0: assigned [mem 0xd8107000-0xd81070ff]
[ 0.199348] pci 0000:00:09.1: BAR 0: set to [mem 0xd8107000-0xd81070ff] (PCI address [0xd8107000-0xd81070ff])
[ 0.199355] pci 0000:00:09.3: BAR 0: assigned [mem 0xd8107100-0xd81071ff]
[ 0.199361] pci 0000:00:09.3: BAR 0: set to [mem 0xd8107100-0xd81071ff] (PCI address [0xd8107100-0xd81071ff])
[ 0.199369] pci 0000:00:09.0: BAR 0: assigned [mem 0xd8107200-0xd810727f]
[ 0.199375] pci 0000:00:09.0: BAR 0: set to [mem 0xd8107200-0xd810727f] (PCI address [0xd8107200-0xd810727f])
[ 0.199379] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.199383] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.199389] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xd80fffff]
[ 0.199394] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff pref]
[ 0.199402] pci 0000:00:06.0: PCI bridge to [bus 09-0a]
[ 0.199409] pci 0000:00:06.0: bridge window [io 0x3000-0x4fff]
[ 0.199416] pci 0000:00:06.0: bridge window [mem 0xdc000000-0xdfffffff]
[ 0.199421] pci 0000:00:06.0: bridge window [mem 0xd8400000-0xd85fffff 64bit pref]
[ 0.199428] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 0.199432] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 0.199438] pci 0000:00:07.0: bridge window [mem 0xd8600000-0xd87fffff]
[ 0.199444] pci 0000:00:07.0: bridge window [mem 0xd8800000-0xd89fffff 64bit pref]
[ 0.199459] pci 0000:00:01.0: setting latency timer to 64
[ 0.199473] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.199479] pci 0000:00:06.0: setting latency timer to 64
[ 0.199486] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.199491] pci 0000:00:07.0: setting latency timer to 64
[ 0.199496] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.199499] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.199502] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.199505] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd80fffff]
[ 0.199508] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff pref]
[ 0.199511] pci_bus 0000:09: resource 0 [io 0x3000-0x4fff]
[ 0.199514] pci_bus 0000:09: resource 1 [mem 0xdc000000-0xdfffffff]
[ 0.199517] pci_bus 0000:09: resource 2 [mem 0xd8400000-0xd85fffff 64bit pref]
[ 0.199520] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.199523] pci_bus 0000:03: resource 1 [mem 0xd8600000-0xd87fffff]
[ 0.199526] pci_bus 0000:03: resource 2 [mem 0xd8800000-0xd89fffff 64bit pref]
[ 0.199615] NET: Registered protocol family 2
[ 0.199717] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.200079] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.200923] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.201339] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.201341] TCP reno registered
[ 0.201344] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.201360] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.201517] NET: Registered protocol family 1
[ 0.201634] pci 0000:01:00.0: Boot video device
[ 0.201639] PCI: CLS 16 bytes, default 64
[ 0.201727] Unpacking initramfs...
[ 0.487224] Freeing initrd memory: 10740k freed
[ 0.494794] Scanning for low memory corruption every 60 seconds
[ 0.495184] audit: initializing netlink socket (disabled)
[ 0.495211] type=2000 audit(1309355313.493:1): initialized
[ 0.507909] highmem bounce pool size: 64 pages
[ 0.507918] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.508162] VFS: Disk quotas dquot_6.5.2
[ 0.508211] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.508430] msgmni has been set to 403
[ 0.508670] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.508675] io scheduler noop registered
[ 0.508677] io scheduler deadline registered
[ 0.508701] io scheduler cfq registered (default)
[ 0.509603] vesafb: framebuffer at 0xc0000000, mapped to 0xf7a80000, using 3072k, total 131072k
[ 0.509606] vesafb: mode is 1024x768x16, linelength=2048, pages=4
[ 0.509609] vesafb: protected mode interface info at cd12:0008
[ 0.509612] vesafb: pmi: set display start = c00cd152, set palette = c00cd19f
[ 0.509614] vesafb: scrolling: redraw
[ 0.509617] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.510077] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 0.510079] bootsplash: silentjpeg size 172445 bytes
[ 0.525733] bootsplash: ...found (1024x768, 90335 bytes, v3).
[ 0.608308] Console: switching to colour frame buffer device 124x44
[ 0.690157] fb0: VESA VGA frame buffer device
[ 0.690223] intel_idle: MWAIT substates: 0x22220
[ 0.690226] intel_idle: does not run on family 6 model 15
[ 0.690258] ERST: Table is not found!
[ 0.690739] hpet_acpi_add: no address or irqs in _CRS
[ 0.690794] Non-volatile memory driver v1.3
[ 0.690796] Linux agpgart interface v0.103
[ 0.690943] agpgart-sis 0000:00:00.0: SiS chipset [1039/0671]
[ 0.700214] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 0.700281] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.732756] Fixed MDIO Bus: probed
[ 0.732763] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.732798] ehci_hcd 0000:00:03.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.732817] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 0.732847] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 0.734380] ehci_hcd 0000:00:03.3: cache line size of 16 is not supported
[ 0.734402] ehci_hcd 0000:00:03.3: irq 22, io mem 0xd8106000
[ 0.740347] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 0.740378] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.740381] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.740384] usb usb1: Product: EHCI Host Controller
[ 0.740387] usb usb1: Manufacturer: Linux 2.6.37.1-1.2-desktop ehci_hcd
[ 0.740389] usb usb1: SerialNumber: 0000:00:03.3
[ 0.740534] hub 1-0:1.0: USB hub found
[ 0.740540] hub 1-0:1.0: 8 ports detected
[ 0.740652] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.740671] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.740683] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 0.740693] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 0.744364] ohci_hcd 0000:00:03.0: irq 20, io mem 0xd8104000
[ 0.801365] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.801368] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.801371] usb usb2: Product: OHCI Host Controller
[ 0.801373] usb usb2: Manufacturer: Linux 2.6.37.1-1.2-desktop ohci_hcd
[ 0.801376] usb usb2: SerialNumber: 0000:00:03.0
[ 0.801502] hub 2-0:1.0: USB hub found
[ 0.801510] hub 2-0:1.0: 4 ports detected
[ 0.801606] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.801620] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 0.801630] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 0.805354] ohci_hcd 0000:00:03.1: irq 21, io mem 0xd8105000
[ 0.858355] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.858359] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.858361] usb usb3: Product: OHCI Host Controller
[ 0.858364] usb usb3: Manufacturer: Linux 2.6.37.1-1.2-desktop ohci_hcd
[ 0.858366] usb usb3: SerialNumber: 0000:00:03.1
[ 0.858493] hub 3-0:1.0: USB hub found
[ 0.858500] hub 3-0:1.0: 4 ports detected
[ 0.858597] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.858633] Initializing USB Mass Storage driver...
[ 0.858664] usbcore: registered new interface driver usb-storage
[ 0.858666] USB Mass Storage support registered.
[ 0.858681] usbcore: registered new interface driver ums-alauda
[ 0.858694] usbcore: registered new interface driver ums-cypress
[ 0.858707] usbcore: registered new interface driver ums-datafab
[ 0.858720] usbcore: registered new interface driver ums-freecom
[ 0.858733] usbcore: registered new interface driver ums-isd200
[ 0.858746] usbcore: registered new interface driver ums-jumpshot
[ 0.858759] usbcore: registered new interface driver ums-karma
[ 0.858771] usbcore: registered new interface driver ums-onetouch
[ 0.858785] usbcore: registered new interface driver ums-sddr09
[ 0.858798] usbcore: registered new interface driver ums-sddr55
[ 0.858811] usbcore: registered new interface driver ums-usbat
[ 0.858879] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.863006] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.865609] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.865616] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.865620] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.865623] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.865627] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.865738] mice: PS/2 mouse device common for all mice
[ 0.870329] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.870351] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.870366] cpuidle: using governor ladder
[ 0.870368] cpuidle: using governor menu
[ 0.870703] usbcore: registered new interface driver usbhid
[ 0.870706] usbhid: USB HID core driver
[ 0.871022] TCP cubic registered
[ 0.871111] NET: Registered protocol family 10
[ 0.871556] lo: Disabled Privacy Extensions
[ 0.871843] lib80211: common routines for IEEE802.11 drivers
[ 0.871847] lib80211_crypt: registered algorithm 'NULL'
[ 0.871849] Registering the dns_resolver key type
[ 0.871896] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5)
[ 0.871908] Using IPI No-Shortcut mode
[ 0.872028] PM: Checking hibernation image partition /dev/disk/by-id/ata-FUJITSU_MHY2200BH_K43BT872FWEE-part5
[ 1.042241] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 1.163589] usb 1-2: New USB device found, idVendor=0bda, idProduct=8189
[ 1.163592] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.163595] usb 1-2: Product: RTL8187B_WLAN_Adapter
[ 1.163598] usb 1-2: Manufacturer: Manufacturer_Realtek
[ 1.163601] usb 1-2: SerialNumber: 00e04c000001
[ 1.538868] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04711/0x202000/0x0
[ 1.577666] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input0
[ 1.616759] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.812667] PM: Hibernation image not present or could not be loaded.
[ 1.812683] registered taskstats version 1
[ 1.812912] Magic number: 15:345:838
[ 1.812987] rtc_cmos 00:02: setting system clock to 2011-06-29 13:48:35 UTC (1309355315)
[ 1.813100] Freeing unused kernel memory: 452k freed
[ 1.813324] Write protecting the kernel text: 4700k
[ 1.813440] Write protecting the kernel read-only data: 3188k
[ 1.868925] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.868937] ACPI: Thermal Zone [THRM] (36 C)
[ 1.872446] pata_sis 0000:00:02.5: version 0.5.2
[ 1.872467] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.872963] scsi0 : pata_sis
[ 1.873126] scsi1 : pata_sis
[ 1.873597] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1080 irq 14
[ 1.873601] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1088 irq 15
[ 2.062235] ata1.00: ATAPI: SlimtypeDVD A DS8A1P, CX12, max UDMA/33
[ 2.103229] ata1.00: configured for UDMA/33
[ 2.107051] scsi 0:0:0:0: CD-ROM Slimtype DVD A DS8A1P CX12 PQ: 0 ANSI: 5
[ 2.107272] ata2: port disabled. ignoring.
[ 2.110611] sata_sis 0000:00:05.0: version 1.0
[ 2.110636] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.110642] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
[ 2.111146] scsi2 : sata_sis
[ 2.111237] scsi3 : sata_sis
[ 2.111964] ata3: PATA max UDMA/133 cmd 0x10c8 ctl 0x10bc bmdma 0x10a0 irq 17
[ 2.111968] ata4: PATA max UDMA/133 cmd 0x10c0 ctl 0x10b8 bmdma 0x10a8 irq 17
[ 2.266219] ata3.00: ATA-8: FUJITSU MHY2200BH, 0081000D, max UDMA/100
[ 2.266223] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.272215] ata3.00: configured for UDMA/100
[ 2.272344] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHY2200B 0081 PQ: 0 ANSI: 5
[ 2.272520] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 2.272581] sd 2:0:0:0: [sda] Write Protect is off
[ 2.272585] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.272611] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.335822] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 2.336234] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.443529] ACPI: acpi_idle registered with cpuidle
[ 2.446321] Monitor-Mwait will be used to enter C-1 state
[ 2.446350] Monitor-Mwait will be used to enter C-2 state
[ 2.446358] Marking TSC unstable due to TSC halts in idle
[ 2.446396] Switching to clocksource acpi_pm
[ 2.456076] udev[88]: starting version 166
[ 3.265425] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[ 3.265432] PM: Basic memory bitmaps created
[ 3.314370] PM: Basic memory bitmaps freed
[ 3.381109] PM: Starting manual resume from disk
[ 3.381114] PM: Hibernation image partition 8:5 present
[ 3.381116] PM: Looking for hibernation image.
[ 3.381407] PM: Image not found (code -22)
[ 3.381412] PM: Hibernation image not present or could not be loaded.
[ 3.581242] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 3.662140] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr
[ 5.408658] preloadtrace: systemtap: 1.4/0.149, base: f7f0a000, memory: 30data/39text/13ctx/13net/268alloc kb, probes: 34
[ 6.137596] udev[333]: starting version 166
[ 6.253422] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 6.253508] ACPI: Power Button [PWRB]
[ 6.253578] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 6.253628] ACPI: Sleep Button [SLPB]
[ 6.253692] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 6.255071] ACPI: Lid Switch [LID]
[ 6.255173] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.255229] ACPI: Power Button [PWRF]
[ 6.293125] ACPI: Battery Slot [BAT0] (battery present)
[ 6.495361] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.537928] ACPI: AC Adapter [AC] (on-line)
[ 6.680046] wmi: Mapper loaded
[ 6.732937] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.808454] sdhci: Secure Digital Host Controller Interface driver
[ 6.808458] sdhci: Copyright(c) Pierre Ossman
[ 6.811025] sdhci-pci 0000:00:09.1: SDHCI controller found [1524:0750] (rev 0)
[ 6.811044] sdhci-pci 0000:00:09.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.811258] 0000:00:09.1 supply vmmc not found, using dummy regulator
[ 6.811308] Registered led device: mmc0::
[ 6.811366] mmc0: SDHCI controller on PCI [0000:00:09.1] using PIO
[ 6.811379] sdhci-pci 0000:00:09.3: SDHCI controller found [1524:0751] (rev 0)
[ 6.811391] sdhci-pci 0000:00:09.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.811411] 0000:00:09.3 supply vmmc not found, using dummy regulator
[ 6.811453] Registered led device: mmc1::
[ 6.811499] mmc1: SDHCI controller on PCI [0000:00:09.3] using PIO
[ 6.831116] sis190: sis190 Gigabit Ethernet driver 1.4 loaded
[ 6.831146] sis190 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 6.831161] sis190 0000:00:04.0: setting latency timer to 64
[ 6.831180] sis190: 0000:00:04.0: Read MAC address from EEPROM
[ 6.853062] sis190: 0000:00:04.0: Realtek PHY RTL8201 transceiver at address 1
[ 6.890402] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 6.890459] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 6.900315] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.900324] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.900564] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 6.984059] sis190: 0000:00:04.0: Using transceiver at address 1 as default
[ 6.992668] sis190 0000:00:04.0: eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f84c8000 (IRQ: 19), 00:90:f5:8f:94:11
[ 6.992673] sis190 0000:00:04.0: eth0: GMII mode.
[ 6.992818] sis190 0000:00:04.0: eth0: Enabling Auto-negotiation
[ 7.001211] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.048805] acpi device:0e: registered as cooling_device2
[ 7.048926] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0c/LNXVIDEO:00/input/input7
[ 7.049003] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 7.581954] cfg80211: Calling CRDA to update world regulatory domain
[ 7.804420] HDA Intel 0000:00:0f.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7.804728] HDA Intel 0000:00:0f.0: setting latency timer to 64
[ 7.903846] ALSA patch_realtek.c:1524: SKU: Nid=0x1d sku_cfg=0x40158a0d
[ 7.903853] ALSA patch_realtek.c:1526: SKU: port_connectivity=0x1
[ 7.903856] ALSA patch_realtek.c:1527: SKU: enable_pcbeep=0x1
[ 7.903859] ALSA patch_realtek.c:1528: SKU: check_sum=0x00000005
[ 7.903863] ALSA patch_realtek.c:1529: SKU: customization=0x0000008a
[ 7.903866] ALSA patch_realtek.c:1530: SKU: external_amp=0x1
[ 7.903869] ALSA patch_realtek.c:1531: SKU: platform_type=0x1
[ 7.903872] ALSA patch_realtek.c:1532: SKU: swap=0x0
[ 7.903875] ALSA patch_realtek.c:1533: SKU: override=0x1
[ 7.904057] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 7.904064] ALSA hda_codec.c:4633: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 7.904068] ALSA hda_codec.c:4637: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.904074] ALSA hda_codec.c:4641: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.904078] ALSA hda_codec.c:4642: mono: mono_out=0x0
[ 7.904081] ALSA hda_codec.c:4645: dig-out=0x1e/0x0
[ 7.904084] ALSA hda_codec.c:4646: inputs:
[ 7.904087] ALSA hda_codec.c:4652:
[ 7.905268] ALSA patch_realtek.c:1581: realtek: No valid SSID, checking pincfg 0x40158a0d for NID 0x1d
[ 7.905272] ALSA patch_realtek.c:1597: realtek: Enabling init ASM_ID=0x8a0d CODEC_ID=10ec0662
[ 7.928613] input: HDA SIS966 Mic as /devices/pci0000:00/0000:00:0f.0/sound/card0/input8
[ 7.928710] input: HDA SIS966 Headphone as /devices/pci0000:00/0000:00:0f.0/sound/card0/input9
[ 8.022035] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.022779] ieee80211 phy0: hwaddr 00:22:43:0e:9d:5e, RTL8187BvE V0 + rtl8225z2, rfkill mask 2
[ 8.044463] rtl8187: Customer ID is 0x00
[ 8.044545] Registered led device: rtl8187-phy0::radio
[ 8.044599] Registered led device: rtl8187-phy0::tx
[ 8.044672] Registered led device: rtl8187-phy0::rx
[ 8.045702] rtl8187: wireless switch is on
[ 8.045770] usbcore: registered new interface driver rtl8187
[ 8.134133] cfg80211: World regulatory domain updated:
[ 8.134137] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.134141] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.134144] (2457


mihkel
Vana Pingviin
Vana Pingviin



Liitunud: 16.04.2006
Postitused: 1284

Distributsioon: Fedora/Centos
estonia.gif
postituspostitatud: 29.06.2011, 13:05  postituse pealkiri:  (teema puudub)  

dmesg väljund on poolik ja teised käsud olid lspci ja lsmod mitte ispci ning ismod. L versus I

lspci on vajalik selleks, et tuvastada, mis kiviga võrgukaart masinas on ja lsmod on vajalik selleks, et tuvastada, kas vajalik moodul (draiver) on laetud. dmesg väljundist on ehk võimalik mingi veateade välja lugeda.


bbad
Pingviini kasutaja
Pingviini kasutaja


Vanus: 46
Liitunud: 16.02.2007
Postitused: 53
Asukoht: Ida-Virumaa
Distributsioon: openSuse 11.4
estonia.gif
postituspostitatud: 29.06.2011, 13:24  postituse pealkiri:  (teema puudub)  

Kood:
 
linux-mltw:/home/bbad # lspci                                                                                                                 
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX                                                                                   
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge)                                                 
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter (rev 02)
00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03)
00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:09.0 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller
00:09.1 SD Host controller: ENE Technology Inc ENE PCI SmartMedia / xD Card Reader Controller
00:09.3 FLASH memory: ENE Technology Inc ENE PCI Secure Digital / MMC Card Reader Controller
00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10)

Kood:

 linux-mltw:/home/bbad # lsmod
Module                  Size  Used by
nls_iso8859_1           3329  0
nls_cp437               4999  0
vfat                   10644  0
fat                    52552  1 vfat
ip6t_LOG                7940  5
xt_tcpudp               3052  2
xt_pkttype               960  3
ipt_LOG                 7845  5
xt_limit                1753  10
edd                     8752  0
ip6t_REJECT             4192  3
nf_conntrack_ipv6       8286  3
nf_defrag_ipv6          9434  1 nf_conntrack_ipv6
ip6table_raw            1203  1
xt_NOTRACK               864  4
ipt_REJECT              2200  3
iptable_raw             1294  1
iptable_filter          1466  1
ip6table_mangle         1636  0
nf_conntrack_netbios_ns     1366  0
nf_conntrack_ipv4       8584  3
nf_defrag_ipv4          1281  1 nf_conntrack_ipv4
ip_tables              13128  2 iptable_raw,iptable_filter
xt_conntrack            2480  6
nf_conntrack           75967  5 nf_conntrack_ipv6,xt_NOTRACK,nf_conntrack_netbios_ns,nf_conntrack_ipv4,xt_conntrack
ip6table_filter         1375  1
ip6_tables             13404  4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter
x_tables               18727  16 ip6t_LOG,xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,ip6table_raw,xt_NOTRACK,ipt_REJECT,iptable_raw,iptable_filter,ip6table_mangle,ip_tables,xt_conntrack,ip6table_filter,ip6_tables
snd_pcm_oss            48271  0
snd_mixer_oss          17521  1 snd_pcm_oss
snd_seq                57777  0
snd_seq_device          6678  1 snd_seq
cpufreq_conservative    10080  0
cpufreq_userspace       2631  0
cpufreq_powersave        930  0
acpi_cpufreq            7519  0
mperf                   1271  1 acpi_cpufreq
fuse                   71688  3
dm_mod                 76266  0
arc4                    1329  2
ecb                     2015  2
snd_hda_codec_si3054     4052  1
snd_hda_codec_realtek   272713  1
snd_hda_intel          25104  2
rtl8187                56735  0
snd_hda_codec          95891  3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel
mac80211              266082  1 rtl8187
cfg80211              155017  2 rtl8187,mac80211
rfkill                 17926  1 cfg80211
snd_hwdep               6198  1 snd_hda_codec
eeprom_93cx6            1477  1 rtl8187
snd_pcm                88841  4 snd_pcm_oss,snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec
snd_timer              22055  2 snd_seq,snd_pcm
snd                    67246  15 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
shpchp                 27427  0
sg                     28446  0
sr_mod                 15048  0
cdrom                  38437  1 sr_mod
sis190                 17978  0
sdhci_pci               7669  0
sdhci                  21156  1 sdhci_pci
soundcore               7270  1 snd
pci_hotplug            28814  1 shpchp
mmc_core               84459  1 sdhci
snd_page_alloc          8121  2 snd_hda_intel,snd_pcm
wmi                     9657  0
video                  14434  0
ac                      3227  0
pcspkr                  1662  0
joydev                  9578  0
serio_raw               4378  0
battery                10066  0
button                  5497  0
ext4                  373729  2
jbd2                   78939  1 ext4
crc16                   1419  1 ext4
fan                     2575  0
processor              36507  3 acpi_cpufreq
ata_generic             3015  0
sata_sis                3604  4
pata_sis                9562  1 sata_sis
thermal                13154  0
thermal_sys            14790  4 video,fan,processor,thermal

[code:1:5c40e1e15b]
linux-mltw:/home/bbad # dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37.1-1.2-desktop (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP PREEMPT 2011-02-21 10:34:10 +0100
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bef90000 (usable)
[ 0.000000] BIOS-e820: 00000000bef90000 - 00000000bef9b000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bef9b000 - 00000000bef9c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bef9c000 - 00000000bf000000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: clevo M7x0S /M7x0S , BIOS 6.00 10/02/0892
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FE0000000 write-back
[ 0.000000] 3 base 120000000 mask FF0000000 write-back
[ 0.000000] 4 base 130000000 mask FF8000000 write-back
[ 0.000000] 5 base 0BFE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bfe00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00f8040] f8040
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] initial memory mapped : 0 - 01000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000371fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00371fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 371fe000 @ ff6000-1000000
[ 0.000000] RAMDISK: 37573000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 36781000 - 371fd7de
[ 0.000000] Move RAMDISK from 0000000037573000 - 0000000037fef7dd to 36781000 - 371fd7dd
[ 0.000000] ACPI: RSDP 000f7f90 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT bef928cd 00084 (v01 PTLTD XSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP bef9ae72 000F4 (v03 SiS 671MX 06040000 PTL 000F4240)
[ 0.000000] ACPI: DSDT bef9691c 044E2 (v01 PTLTD 671 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS bef9bfc0 00040
[ 0.000000] ACPI: APIC bef9af66 0005E (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG bef9afc4 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT bef941f5 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT bef9414f 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT bef940a9 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT bef94003 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT bef93f5d 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT bef93eb7 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT bef93e11 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT bef93d6b 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT bef92951 0141A (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] could not find any ACPI SRAT memory areas.
[ 0.000000] failed to get NUMA memory information from SRAT table
[ 0.000000] NUMA - single node, flat memory mode
[ 0.000000] Node: 0, start_pfn: 0, end_pfn: 138000
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 5c000 60000 64000 68000 6c000 70000 74000 78000 7c000 80000 84000 88000 8c000 90000 94000 98000 9c000 a0000 a4000 a8000 ac000 b0000 b4000 b8000 bc000 c0000 c4000 c8000 cc000 d0000 d4000 d8000 dc000 e0000 e4000 e8000 ec000 f0000 f4000 f8000 fc000 100000 104000 108000 10c000 110000 114000 118000 11c000 120000 124000 128000 12c000 130000 134000
[ 0.000000] node 0 pfn: [0 - 138000]
[ 0.000000] Reserving 10240 pages of KVA for lmem_map of node 0 at 135800
[ 0.000000] Reserving total of 2800 pages for numa KVA remap
[ 0.000000] kva_start_pfn ~ 33e00 max_low_pfn ~ 371fe
[ 0.000000] max_pfn = 138000
[ 0.000000] 4110MB HIGHMEM available.
[ 0.000000] 881MB LOWMEM available.
[ 0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe
[ 0.000000] Low memory ends at vaddr f71fe000
[ 0.000000] node 0 will remap to vaddr f3e00000 - f6600000
[ 0.000000] allocate_pgdat: node 0 NODE_DATA f3e00000
[ 0.000000] remap_numa_kva: node 0
[ 0.000000] remap_numa_kva: f3e00000 to pfn 00135800
[ 0.000000] remap_numa_kva: f4000000 to pfn 00135a00
[ 0.000000] remap_numa_kva: f4200000 to pfn 00135c00
[ 0.000000] remap_numa_kva: f4400000 to pfn 00135e00
[ 0.000000] remap_numa_kva: f4600000 to pfn 00136000
[ 0.000000] remap_numa_kva: f4800000 to pfn 00136200
[ 0.000000] remap_numa_kva: f4a00000 to pfn 00136400
[ 0.000000] remap_numa_kva: f4c00000 to pfn 00136600
[ 0.000000] remap_numa_kva: f4e00000 to pfn 00136800
[ 0.000000] remap_numa_kva: f5000000 to pfn 00136a00
[ 0.000000] remap_numa_kva: f5200000 to pfn 00136c00
[ 0.000000] remap_numa_kva: f5400000 to pfn 00136e00
[ 0.000000] remap_numa_kva: f5600000 to pfn 00137000
[ 0.000000] remap_numa_kva: f5800000 to pfn 00137200
[ 0.000000] remap_numa_kva: f5a00000 to pfn 00137400
[ 0.000000] remap_numa_kva: f5c00000 to pfn 00137600
[ 0.000000] remap_numa_kva: f5e00000 to pfn 00137800
[ 0.000000] remap_numa_kva: f6000000 to pfn 00137a00
[ 0.000000] remap_numa_kva: f6200000 to pfn 00137c00
[ 0.000000] remap_numa_kva: f6400000 to pfn 00137e00
[ 0.000000] High memory starts at vaddr f71fe000
[ 0.000000] mapped low ram: 0 - 371fe000
[ 0.000000] low ram: 0 - 371fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000371fe
[ 0.000000] HighMem 0x000371fe -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000bef90
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] On node 0 totalpages: 1011485
[ 0.000000] free_area_init_node: node 0, pgdat f3e00000, node_mem_map f3e02200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1732 pages used for memmap
[ 0.000000] Normal zone: 219962 pages, LIFO batch:31
[ 0.000000] HighMem zone: 8221 pages used for memmap
[ 0.000000] HighMem zone: 777589 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:8
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f3c00000 s28160 r0 d20992 u1048576
[ 0.000000] pcpu-alloc: s28160 r0 d20992 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1001500
[ 0.000000] Policy zone: HighMem
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-FUJITSU_MHY2200BH_K43BT872FWEE-part6 resume=/dev/disk/by-id/ata-FUJITSU_MHY2200BH_K43BT872FWEE-part5 splash=silent quiet vga=0x317
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 25558720 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000371fe:00138000)
[ 0.000000] Memory: 3917624k/5111808k available (4699k kernel code, 87356k reserved, 3490k data, 452k init, 3102280k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff5b4000 - 0xfffff000 (10540 kB)
[ 0.000000] pkmap : 0xff200000 - 0xff400000 (2048 kB)
[ 0.000000] vmalloc : 0xf79fe000 - 0xff1fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf71fe000 ( 881 MB)
[ 0.000000] .init : 0xc0a00000 - 0xc0a71000 ( 452 kB)
[ 0.000000] .data : 0xc0696c5d - 0xc09ff508 (3490 kB)
[ 0.000000] .text : 0xc0200000 - 0xc0696c5d (4699 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:8448 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f1c0c000 soft=f1c0e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1833.616 MHz processor.
[ 0.001015] Calibrating delay loop (skipped), value calculated using timer frequency.. 3667.23 BogoMIPS (lpj=1833616)
[ 0.001024] pid_max: default: 32768 minimum: 301
[ 0.001132] Security Framework initialized
[ 0.001174] AppArmor: AppArmor initialized
[ 0.001310] Mount-cache hash table entries: 512
[ 0.001609] Initializing cgroup subsys ns
[ 0.001616] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.001622] Initializing cgroup subsys cpuacct
[ 0.001631] Initializing cgroup subsys memory
[ 0.001659] Initializing cgroup subsys devices
[ 0.001665] Initializing cgroup subsys freezer
[ 0.001670] Initializing cgroup subsys net_cls
[ 0.001675] Initializing cgroup subsys blkio
[ 0.002075] CPU: Physical Processor ID: 0
[ 0.002079] CPU: Processor Core ID: 0
[ 0.002085] mce: CPU supports 6 MCE banks
[ 0.002102] CPU0: Thermal monitoring enabled (TM1)
[ 0.002112] using mwait in idle threads.
[ 0.002134] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.002146] PEBS disabled due to CPU errata.
[ 0.002154] ... version: 2
[ 0.002156] ... bit width: 40
[ 0.002160] ... generic registers: 2
[ 0.002162] ... value mask: 000000ffffffffff
[ 0.002166] ... max period: 000000007fffffff
[ 0.002167] ... fixed-purpose events: 3
[ 0.002171] ... event mask: 0000000700000003
[ 0.003176] ACPI: Core revision 20101013
[ 0.022119] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.023015] Mapping cpu 0 to node 0
[ 0.023180] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.033189] CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d
[ 0.036049] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.040021] CPU 1 irqstacks, hard=f1cc0000 soft=f1cc2000
[ 0.040026] Booting Node 0, Processors #1 Ok.
[ 0.001999] Initializing CPU#1
[ 0.001999] Mapping cpu 1 to node 0
[ 0.112042] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.113010] Brought up 2 CPUs
[ 0.113013] Total of 2 processors activated (7334.04 BogoMIPS).
[ 0.113559] devtmpfs: initialized
[ 0.114032] regulator: core version 0.5
[ 0.114095] regulator: dummy:
[ 0.114115] Time: 13:48:34 Date: 06/29/11
[ 0.114188] NET: Registered protocol family 16
[ 0.114445] ACPI: bus type pci registered
[ 0.114560] PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xe0000000-0xe02fffff] (base 0xe0000000)
[ 0.114564] PCI: MMCONFIG at [mem 0xe0000000-0xe02fffff] reserved in E820
[ 0.114566] PCI: Using MMCONFIG for extended config space
[ 0.114568] PCI: Using configuration type 1 for base access
[ 0.115645] bio: create slab <bio-0> at 0
[ 0.117412] ACPI: EC: Look up EC in DSDT
[ 0.122301] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.124036] ACPI: SSDT bef94d0f 00258 (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.124391] ACPI: Dynamic OEM Table Load:
[ 0.124395] ACPI: SSDT (null) 00258 (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.125486] ACPI: SSDT bef94454 00518 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 0.125898] ACPI: Dynamic OEM Table Load:
[ 0.125902] ACPI: SSDT (null) 00518 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 0.126731] ACPI: SSDT bef94f67 001A9 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.127088] ACPI: Dynamic OEM Table Load:
[ 0.127092] ACPI: SSDT (null) 001A9 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.127467] ACPI: SSDT bef9496c 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 0.127793] ACPI: Dynamic OEM Table Load:
[ 0.127797] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 0.131067] ACPI: Interpreter enabled
[ 0.131081] ACPI: (supports S0 S3 S4 S5)
[ 0.131108] ACPI: Using IOAPIC for interrupt routing
[ 0.139518] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.139555] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.139590] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.139625] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.139660] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.139695] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.139730] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.139765] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-743)
[ 0.140029] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.140242] ACPI: No dock devices found.
[ 0.140249] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.141154] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.142936] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.142940] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.142943] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.142947] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffedffff] (ignored)
[ 0.142950] pci_root PNP0A03:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)
[ 0.142953] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.142956] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.142959] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.142962] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
[ 0.142982] pci 0000:00:00.0: [1039:0671] type 0 class 0x000600
[ 0.142995] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff]
[ 0.143062] pci 0000:00:01.0: [1039:0003] type 1 class 0x000604
[ 0.143107] pci 0000:00:02.0: [1039:0968] type 0 class 0x000601
[ 0.143197] pci 0000:00:02.5: [1039:5513] type 0 class 0x000101
[ 0.143220] pci 0000:00:02.5: reg 10: [io 0x01f0-0x01f7]
[ 0.143231] pci 0000:00:02.5: reg 14: [io 0x03f4-0x03f7]
[ 0.143242] pci 0000:00:02.5: reg 18: [io 0x0170-0x0177]
[ 0.143254] pci 0000:00:02.5: reg 1c: [io 0x0374-0x0377]
[ 0.143265] pci 0000:00:02.5: reg 20: [io 0x1080-0x108f]
[ 0.143304] pci 0000:00:02.5: PME# supported from D3cold
[ 0.143309] pci 0000:00:02.5: PME# disabled
[ 0.143328] pci 0000:00:03.0: [1039:7001] type 0 class 0x000c03
[ 0.143343] pci 0000:00:03.0: reg 10: [mem 0xd8104000-0xd8104fff]
[ 0.143410] pci 0000:00:03.1: [1039:7001] type 0 class 0x000c03
[ 0.143424] pci 0000:00:03.1: reg 10: [mem 0xd8105000-0xd8105fff]
[ 0.143497] pci 0000:00:03.3: [1039:7002] type 0 class 0x000c03
[ 0.143515] pci 0000:00:03.3: reg 10: [mem 0xd8106000-0xd8106fff]
[ 0.143585] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.143590] pci 0000:00:03.3: PME# disabled
[ 0.143613] pci 0000:00:04.0: [1039:0191] type 0 class 0x000200
[ 0.143632] pci 0000:00:04.0: reg 10: [mem 0xd8307000-0xd830707f]
[ 0.143643] pci 0000:00:04.0: reg 14: [io 0x1000-0x107f]
[ 0.143705] pci 0000:00:04.0: supports D1 D2
[ 0.143708] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.143713] pci 0000:00:04.0: PME# disabled
[ 0.143732] pci 0000:00:05.0: [1039:1183] type 0 class 0x000101
[ 0.143750] pci 0000:00:05.0: reg 10: [io 0x10c8-0x10cf]
[ 0.143761] pci 0000:00:05.0: reg 14: [io 0x10bc-0x10bf]
[ 0.143772] pci 0000:00:05.0: reg 18: [io 0x10c0-0x10c7]
[ 0.143783] pci 0000:00:05.0: reg 1c: [io 0x10b8-0x10bb]
[ 0.143794] pci 0000:00:05.0: reg 20: [io 0x10a0-0x10af]
[ 0.143833] pci 0000:00:05.0: PME# supported from D3cold
[ 0.143838] pci 0000:00:05.0: PME# disabled
[ 0.143861] pci 0000:00:06.0: [1039:000a] type 1 class 0x000604
[ 0.143935] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.143940] pci 0000:00:06.0: PME# disabled
[ 0.143972] pci 0000:00:07.0: [1039:000a] type 1 class 0x000604
[ 0.144049] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.144054] pci 0000:00:07.0: PME# disabled
[ 0.144082] pci 0000:00:09.0: [1524:0730] type 0 class 0x000501
[ 0.144102] pci 0000:00:09.0: reg 10: [mem 0x00007400-0x0000747f]
[ 0.144174] pci 0000:00:09.0: supports D1 D2
[ 0.144177] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot
[ 0.144182] pci 0000:00:09.0: PME# disabled
[ 0.144201] pci 0000:00:09.1: [1524:0750] type 0 class 0x000805
[ 0.144221] pci 0000:00:09.1: reg 10: [mem 0x00000000-0x000000ff]
[ 0.144293] pci 0000:00:09.1: supports D1 D2
[ 0.144296] pci 0000:00:09.1: PME# supported from D0 D1 D2 D3hot
[ 0.144301] pci 0000:00:09.1: PME# disabled
[ 0.144321] pci 0000:00:09.3: [1524:0751] type 0 class 0x000501
[ 0.144340] pci 0000:00:09.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.144412] pci 0000:00:09.3: supports D1 D2
[ 0.144415] pci 0000:00:09.3: PME# supported from D0 D1 D2 D3hot
[ 0.144420] pci 0000:00:09.3: PME# disabled
[ 0.144452] pci 0000:00:0f.0: [1039:7502] type 0 class 0x000403
[ 0.144471] pci 0000:00:0f.0: reg 10: [mem 0xd8100000-0xd8103fff]
[ 0.144543] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
[ 0.144548] pci 0000:00:0f.0: PME# disabled
[ 0.144601] pci 0000:01:00.0: [1039:6351] type 0 class 0x000300
[ 0.144618] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.144627] pci 0000:01:00.0: reg 14: [mem 0xd8000000-0xd801ffff]
[ 0.144636] pci 0000:01:00.0: reg 18: [io 0x9000-0x907f]
[ 0.144681] pci 0000:01:00.0: supports D1 D2
[ 0.144721] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.144726] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.144731] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xd80fffff]
[ 0.144736] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff pref]
[ 0.144795] pci 0000:00:06.0: PCI bridge to [bus 09-0a]
[ 0.144803] pci 0000:00:06.0: bridge window [io 0x3000-0x4fff]
[ 0.144808] pci 0000:00:06.0: bridge window [mem 0xdc000000-0xdfffffff]
[ 0.144816] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.144874] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 0.144882] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.144887] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.144895] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.144916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.155851] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11)
[ 0.155965] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11)
[ 0.156082] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 9 10 11)
[ 0.156192] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11)
[ 0.156334] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11)
[ 0.156444] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11)
[ 0.156553] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *7 9 10 11)
[ 0.156663] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[ 0.156722] HEST: Table is not found!
[ 0.156991] SCSI subsystem initialized
[ 0.157027] libata version 3.00 loaded.
[ 0.157119] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.157122] vgaarb: loaded
[ 0.157160] usbcore: registered new interface driver usbfs
[ 0.157183] usbcore: registered new interface driver hub
[ 0.157193] usbcore: registered new device driver usb
[ 0.157193] PCI: Using ACPI for IRQ routing
[ 0.157193] PCI: pci_cache_line_size set to 64 bytes
[ 0.157193] pci 0000:00:09.0: address space collision: [mem 0x00007400-0x0000747f] conflicts with reserved [mem 0x00000000-0x0000ffff]
[ 0.157193] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.157193] reserve RAM buffer: 00000000bef90000 - 00000000bfffffff
[ 0.157258] NetLabel: Initializing
[ 0.157260] NetLabel: domain hash size = 128
[ 0.157262] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.157277] NetLabel: unlabeled traffic allowed by default
[ 0.157297] Switching to clocksource tsc
[ 0.158831] AppArmor: AppArmor Filesystem Enabled
[ 0.158840] pnp: PnP ACPI init
[ 0.158863] ACPI: bus type pnp registered
[ 0.160183] pnp 00:00: [bus 00-ff]
[ 0.160187] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.160193] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.160196] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.160199] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.160202] pnp 00:00: [mem 0xc0000000-0xffedffff window]
[ 0.160205] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.160208] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.160211] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.160214] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.160217] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.160220] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.160223] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.160226] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.160229] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.160232] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.160235] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.160238] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.160307] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.160633] pnp 00:01: [io 0x0000-0x000f]
[ 0.160636] pnp 00:01: [io 0x0081-0x008f]
[ 0.160639] pnp 00:01: [io 0x00c0-0x00df]
[ 0.160641] pnp 00:01: [io 0x0480-0x048f]
[ 0.160645] pnp 00:01: [dma 4]
[ 0.160699] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.160747] pnp 00:02: [io 0x0070-0x0071]
[ 0.160806] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.160820] pnp 00:03: [io 0x0061]
[ 0.160874] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.160965] pnp 00:04: [io 0x8000-0x80be]
[ 0.160968] pnp 00:04: [io 0x8100-0x812f]
[ 0.160971] pnp 00:04: [io 0x0080]
[ 0.160973] pnp 00:04: [io 0x04d0-0x04d1]
[ 0.160976] pnp 00:04: [io 0xfe00]
[ 0.160978] pnp 00:04: [io 0x002e]
[ 0.160981] pnp 00:04: [io 0x002f]
[ 0.160983] pnp 00:04: [io 0x0092]
[ 0.160986] pnp 00:04: [io 0x0072-0x0073]
[ 0.160988] pnp 00:04: [io 0x0078-0x0079]
[ 0.160991] pnp 00:04: [io 0x004e-0x004f]
[ 0.160993] pnp 00:04: [io 0x0068]
[ 0.160996] pnp 00:04: [io 0x006c]
[ 0.160998] pnp 00:04: [io 0x0261]
[ 0.161001] pnp 00:04: [io 0x0200-0x020f]
[ 0.161003] pnp 00:04: [io 0x0400-0x040f]
[ 0.161006] pnp 00:04: [mem 0xe0000000-0xefffffff]
[ 0.161009] pnp 00:04: [mem 0xfec00000-0xfecfffff]
[ 0.161012] pnp 00:04: [mem 0xfee00000-0xfeefffff]
[ 0.161015] pnp 00:04: [mem 0xffb80000-0xffbfffff]
[ 0.161017] pnp 00:04: [mem 0xffc00000-0xffc00fff]
[ 0.161020] pnp 00:04: [mem 0xffe00000-0xffe00fff]
[ 0.161023] pnp 00:04: [mem 0xffe80000-0xffefffff]
[ 0.161119] pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.161144] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.161158] pnp 00:05: [irq 13]
[ 0.161216] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.161250] pnp 00:06: [irq 12]
[ 0.161306] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.161321] pnp 00:07: [mem 0xfec00000-0xfecfffff]
[ 0.161324] pnp 00:07: [mem 0xfee00000-0xfeefffff]
[ 0.161327] pnp 00:07: [mem 0xffc00000-0xffc00fff]
[ 0.161330] pnp 00:07: [mem 0xffe00000-0xffe00fff]
[ 0.161394] pnp 00:07: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.161531] pnp 00:08: [irq 0 disabled]
[ 0.161537] pnp 00:08: [irq 8]
[ 0.161540] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.161600] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.161616] pnp 00:09: [io 0x0060]
[ 0.161620] pnp 00:09: [io 0x0064]
[ 0.161626] pnp 00:09: [irq 1]
[ 0.161683] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.161935] pnp: PnP ACPI: found 10 devices
[ 0.161938] ACPI: ACPI bus type pnp unregistered
[ 0.161952] system 00:04: [io 0x8000-0x80be] has been reserved
[ 0.161956] system 00:04: [io 0x8100-0x812f] has been reserved
[ 0.161959] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.161963] system 00:04: [io 0xfe00] has been reserved
[ 0.161967] system 00:04: [io 0x0261] has been reserved
[ 0.161970] system 00:04: [io 0x0200-0x020f] has been reserved
[ 0.161973] system 00:04: [io 0x0400-0x040f] has been reserved
[ 0.161978] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.161982] system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.161985] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.161989] system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.161993] system 00:04: [mem 0xffc00000-0xffc00fff] has been reserved
[ 0.161996] system 00:04: [mem 0xffe00000-0xffe00fff] has been reserved
[ 0.162000] system 00:04: [mem 0xffe80000-0xffefffff] has been reserved
[ 0.199313] pci 0000:00:06.0: BAR 15: assigned [mem 0xd8400000-0xd85fffff 64bit pref]
[ 0.199321] pci 0000:00:07.0: BAR 14: assigned [mem 0xd8600000-0xd87fffff]
[ 0.199329] pci 0000:00:07.0: BAR 15: assigned [mem 0xd8800000-0xd89fffff 64bit pref]
[ 0.199334] pci 0000:00:07.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.199341] pci 0000:00:09.1: BAR 0: assigned [mem 0xd8107000-0xd81070ff]
[ 0.199348] pci 0000:00:09.1: BAR 0: set to [mem 0xd8107000-0xd81070ff] (PCI address [0xd8107000-0xd81070ff])
[ 0.199355] pci 0000:00:09.3: BAR 0: assigned [mem 0xd8107100-0xd81071ff]
[ 0.199361] pci 0000:00:09.3: BAR 0: set to [mem 0xd8107100-0xd81071ff] (PCI address [0xd8107100-0xd81071ff])
[ 0.199369] pci 0000:00:09.0: BAR 0: assigned [mem 0xd8107200-0xd810727f]
[ 0.199375] pci 0000:00:09.0: BAR 0: set to [mem 0xd8107200-0xd810727f] (PCI address [0xd8107200-0xd810727f])
[ 0.199379] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.199383] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.199389] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xd80fffff]
[ 0.199394] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff pref]
[ 0.199402] pci 0000:00:06.0: PCI bridge to [bus 09-0a]
[ 0.199409] pci 0000:00:06.0: bridge window [io 0x3000-0x4fff]
[ 0.199416] pci 0000:00:06.0: bridge window [mem 0xdc000000-0xdfffffff]
[ 0.199421] pci 0000:00:06.0: bridge window [mem 0xd8400000-0xd85fffff 64bit pref]
[ 0.199428] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 0.199432] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 0.199438] pci 0000:00:07.0: bridge window [mem 0xd8600000-0xd87fffff]
[ 0.199444] pci 0000:00:07.0: bridge window [mem 0xd8800000-0xd89fffff 64bit pref]
[ 0.199459] pci 0000:00:01.0: setting latency timer to 64
[ 0.199473] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.199479] pci 0000:00:06.0: setting latency timer to 64
[ 0.199486] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.199491] pci 0000:00:07.0: setting latency timer to 64
[ 0.199496] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.199499] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.199502] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.199505] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd80fffff]
[ 0.199508] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff pref]
[ 0.199511] pci_bus 0000:09: resource 0 [io 0x3000-0x4fff]
[ 0.199514] pci_bus 0000:09: resource 1 [mem 0xdc000000-0xdfffffff]
[ 0.199517] pci_bus 0000:09: resource 2 [mem 0xd8400000-0xd85fffff 64bit pref]
[ 0.199520] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.199523] pci_bus 0000:03: resource 1 [mem 0xd8600000-0xd87fffff]
[ 0.199526] pci_bus 0000:03: resource 2 [mem 0xd8800000-0xd89fffff 64bit pref]
[ 0.199615] NET: Registered protocol family 2
[ 0.199717] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.200079] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.200923] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.201339] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.201341] TCP reno registered
[ 0.201344] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.201360] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.201517] NET: Registered protocol family 1
[ 0.201634] pci 0000:01:00.0: Boot video device
[ 0.201639] PCI: CLS 16 bytes, default 64
[ 0.201727] Unpacking initramfs...
[ 0.487224] Freeing initrd memory: 10740k freed
[ 0.494794] Scanning for low memory corruption every 60 seconds
[ 0.495184] audit: initializing netlink socket (disabled)
[ 0.495211] type=2000 audit(1309355313.493:1): initialized
[ 0.507909] highmem bounce pool size: 64 pages
[ 0.507918] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.508162] VFS: Disk quotas dquot_6.5.2
[ 0.508211] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.508430] msgmni has been set to 403
[ 0.508670] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.508675] io scheduler noop registered
[ 0.508677] io scheduler deadline registered
[ 0.508701] io scheduler cfq registered (default)
[ 0.509603] vesafb: framebuffer at 0xc0000000, mapped to 0xf7a80000, using 3072k, total 131072k
[ 0.509606] vesafb: mode is 1024x768x16, linelength=2048, pages=4
[ 0.509609] vesafb: protected mode interface info at cd12:0008
[ 0.509612] vesafb: pmi: set display start = c00cd152, set palette = c00cd19f
[ 0.509614] vesafb: scrolling: redraw
[ 0.509617] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.510077] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 0.510079] bootsplash: silentjpeg size 172445 bytes
[ 0.525733] bootsplash: ...found (1024x768, 90335 bytes, v3).
[ 0.608308] Console: switching to colour frame buffer device 124x44
[ 0.690157] fb0: VESA VGA frame buffer device
[ 0.690223] intel_idle: MWAIT substates: 0x22220
[ 0.690226] intel_idle: does not run on family 6 model 15
[ 0.690258] ERST: Table is not found!
[ 0.690739] hpet_acpi_add: no address or irqs in _CRS
[ 0.690794] Non-volatile memory driver v1.3
[ 0.690796] Linux agpgart interface v0.103
[ 0.690943] agpgart-sis 0000:00:00.0: SiS chipset [1039/0671]
[ 0.700214] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 0.700281] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.732756] Fixed MDIO Bus: probed
[ 0.732763] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.732798] ehci_hcd 0000:00:03.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.732817] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 0.732847] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 0.734380] ehci_hcd 0000:00:03.3: cache line size of 16 is not supported
[ 0.734402] ehci_hcd 0000:00:03.3: irq 22, io mem 0xd8106000
[ 0.740347] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 0.740378] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.740381] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.740384] usb usb1: Product: EHCI Host Controller
[ 0.740387] usb usb1: Manufacturer: Linux 2.6.37.1-1.2-desktop ehci_hcd
[ 0.740389] usb usb1: SerialNumber: 0000:00:03.3
[ 0.740534] hub 1-0:1.0: USB hub found
[ 0.740540] hub 1-0:1.0: 8 ports detected
[ 0.740652] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.740671] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.740683] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 0.740693] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 0.744364] ohci_hcd 0000:00:03.0: irq 20, io mem 0xd8104000
[ 0.801365] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.801368] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.801371] usb usb2: Product: OHCI Host Controller
[ 0.801373] usb usb2: Manufacturer: Linux 2.6.37.1-1.2-desktop ohci_hcd
[ 0.801376] usb usb2: SerialNumber: 0000:00:03.0
[ 0.801502] hub 2-0:1.0: USB hub found
[ 0.801510] hub 2-0:1.0: 4 ports detected
[ 0.801606] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.801620] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 0.801630] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 0.805354] ohci_hcd 0000:00:03.1: irq 21, io mem 0xd8105000
[ 0.858355] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.858359] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.858361] usb usb3: Product: OHCI Host Controller
[ 0.858364] usb usb3: Manufacturer: Linux 2.6.37.1-1.2-desktop ohci_hcd
[ 0.858366] usb usb3: SerialNumber: 0000:00:03.1
[ 0.858493] hub 3-0:1.0: USB hub found
[ 0.858500] hub 3-0:1.0: 4 ports detected
[ 0.858597] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.858633] Initializing USB Mass Storage driver...
[ 0.858664] usbcore: registered new interface driver usb-storage
[ 0.858666] USB Mass Storage support registered.
[ 0.858681] usbcore: registered new interface driver ums-alauda
[ 0.858694] usbcore: registered new interface driver ums-cypress
[ 0.858707] usbcore: registered new interface driver ums-datafab
[ 0.858720] usbcore: registered new interface driver ums-freecom
[ 0.858733] usbcore: registered new interface driver ums-isd200
[ 0.858746] usbcore: registered new interface driver ums-jumpshot
[ 0.858759] usbcore: registered new interface driver ums-karma
[ 0.858771] usbcore: registered new interface driver ums-onetouch
[ 0.858785] usbcore: registered new interface driver ums-sddr09
[ 0.858798] usbcore: registered new interface driver ums-sddr55
[ 0.858811] usbcore: registered new interface driver ums-usbat
[ 0.858879] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.863006] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.865609] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.865616] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.865620] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.865623] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.865627] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.865738] mice: PS/2 mouse device common for all mice
[ 0.870329] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.870351] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.870366] cpuidle: using governor ladder
[ 0.870368] cpuidle: using governor menu
[ 0.870703] usbcore: registered new interface driver usbhid
[ 0.870706] usbhid: USB HID core driver
[ 0.871022] TCP cubic registered
[ 0.871111] NET: Registered protocol family 10
[ 0.871556] lo: Disabled Privacy Extensions
[ 0.871843] lib80211: common routines for IEEE802.11 drivers
[ 0.871847] lib80211_crypt: registered algorithm 'NULL'
[ 0.871849] Registering the dns_resolver key type
[ 0.871896] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5)
[ 0.871908] Using IPI No-Shortcut mode
[ 0.872028] PM: Checking hibernation image partition /dev/disk/by-id/ata-FUJITSU_MHY2200BH_K43BT872FWEE-part5
[ 1.042241] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 1.163589] usb 1-2: New USB device found, idVendor=0bda, idProduct=8189
[ 1.163592] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.163595] usb 1-2: Product: RTL8187B_WLAN_Adapter
[ 1.163598] usb 1-2: Manufacturer: Manufacturer_Realtek
[ 1.163601] usb 1-2: SerialNumber: 00e04c000001
[ 1.538868] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04711/0x202000/0x0
[ 1.577666] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input0
[ 1.616759] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.812667] PM: Hibernation image not present or could not be loaded.
[ 1.812683] registered taskstats version 1
[ 1.812912] Magic number: 15:345:838
[ 1.812987] rtc_cmos 00:02: setting system clock to 2011-06-29 13:48:35 UTC (1309355315)
[ 1.813100] Freeing unused kernel memory: 452k freed
[ 1.813324] Write protecting the kernel text: 4700k
[ 1.813440] Write protecting the kernel read-only data: 3188k
[ 1.868925] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.868937] ACPI: Thermal Zone [THRM] (36 C)
[ 1.872446] pata_sis 0000:00:02.5: version 0.5.2
[ 1.872467] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.872963] scsi0 : pata_sis
[ 1.873126] scsi1 : pata_sis
[ 1.873597] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1080 irq 14
[ 1.873601] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1088 irq 15
[ 2.062235] ata1.00: ATAPI: SlimtypeDVD A DS8A1P, CX12, max UDMA/33
[ 2.103229] ata1.00: configured for UDMA/33
[ 2.107051] scsi 0:0:0:0: CD-ROM Slimtype DVD A DS8A1P CX12 PQ: 0 ANSI: 5
[ 2.107272] ata2: port disabled. ignoring.
[ 2.110611] sata_sis 0000:00:05.0: version 1.0
[ 2.110636] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.110642] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
[ 2.111146] scsi2 : sata_sis
[ 2.111237] scsi3 : sata_sis
[ 2.111964] ata3: PATA max UDMA/133 cmd 0x10c8 ctl 0x10bc bmdma 0x10a0 irq 17
[ 2.111968] ata4: PATA max UDMA/133 cmd 0x10c0 ctl 0x10b8 bmdma 0x10a8 irq 17
[ 2.266219] ata3.00: ATA-8: FUJITSU MHY2200BH, 0081000D, max UDMA/100
[ 2.266223] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.272215] ata3.00: configured for UDMA/100
[ 2.272344] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHY2200B 0081 PQ: 0 ANSI: 5
[ 2.272520] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 2.272581] sd 2:0:0:0: [sda] Write Protect is off
[ 2.272585] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.272611] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.335822] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 2.336234] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.443529] ACPI: acpi_idle registered with cpuidle
[ 2.446321] Monitor-Mwait will be used to enter C-1 state
[ 2.446350] Monitor-Mwait will be used to enter C-2 state
[ 2.446358] Marking TSC unstable due to TSC halts in idle
[ 2.446396] Switching to clocksource acpi_pm
[ 2.456076] udev[88]: starting version 166
[ 3.265425] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[ 3.265432] PM: Basic memory bitmaps created
[ 3.314370] PM: Basic memory bitmaps freed
[ 3.381109] PM: Starting manual resume from disk
[ 3.381114] PM: Hibernation image partition 8:5 present
[ 3.381116] PM: Looking for hibernation image.
[ 3.381407] PM: Image not found (code -22)
[ 3.381412] PM: Hibernation image not present or could not be loaded.
[ 3.581242] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 3.662140] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr
[ 5.408658] preloadtrace: systemtap: 1.4/0.149, base: f7f0a000, memory: 30data/39text/13ctx/13net/268alloc kb, probes: 34
[ 6.137596] udev[333]: starting version 166
[ 6.253422] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 6.253508] ACPI: Power Button [PWRB]
[ 6.253578] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 6.253628] ACPI: Sleep Button [SLPB]
[ 6.253692] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 6.255071] ACPI: Lid Switch [LID]
[ 6.255173] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.255229] ACPI: Power Button [PWRF]
[ 6.293125] ACPI: Battery Slot [BAT0] (battery present)
[ 6.495361] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.537928] ACPI: AC Adapter [AC] (on-line)
[ 6.680046] wmi: Mapper loaded
[ 6.732937] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.808454] sdhci: Secure Digital Host Controller Interface driver
[ 6.808458] sdhci: Copyright(c) Pierre Ossman
[ 6.811025] sdhci-pci 0000:00:09.1: SDHCI controller found [1524:0750] (rev 0)
[ 6.811044] sdhci-pci 0000:00:09.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.811258] 0000:00:09.1 supply vmmc not found, using dummy regulator
[ 6.811308] Registered led device: mmc0::
[ 6.811366] mmc0: SDHCI controller on PCI [0000:00:09.1] using PIO
[ 6.811379] sdhci-pci 0000:00:09.3: SDHCI controller found [1524:0751] (rev 0)
[ 6.811391] sdhci-pci 0000:00:09.3: PCI INT




Viimati muutis bbad 29.06.2011, 13:42; muudetud 1 kord
mihkel
Vana Pingviin
Vana Pingviin



Liitunud: 16.04.2006
Postitused: 1284

Distributsioon: Fedora/Centos
estonia.gif
postituspostitatud: 29.06.2011, 13:41  postituse pealkiri:  (teema puudub)  

Google näitab, et sis190'ga on probleeme enam, kui küll. Kas sa dualbuudid masniat windowsi ja linuxiga?


bbad
Pingviini kasutaja
Pingviini kasutaja


Vanus: 46
Liitunud: 16.02.2007
Postitused: 53
Asukoht: Ida-Virumaa
Distributsioon: openSuse 11.4
estonia.gif
postituspostitatud: 29.06.2011, 13:44  postituse pealkiri:  (teema puudub)  

ma ei saa seda viimast pikka koodi panna foorum vist ei luba, jätab asja poolikuks jne
mõlemas on jah nii win kui linux


mihkel
Vana Pingviin
Vana Pingviin



Liitunud: 16.04.2006
Postitused: 1284

Distributsioon: Fedora/Centos
estonia.gif
postituspostitatud: 29.06.2011, 13:54  postituse pealkiri:  (teema puudub)  

Üks lahendus, mis ma Internetist leidsin, ütleb, et windows topib võrgukaardi "sügavasse unne" ja linux ei suuda kaarti unest üles äratada. Lahenduseks on windowsi all kaardi draiverite seadedest Wake on Lan võimaldamine
http://www.ehow.com/how_5612950_enable-wake-lan-windows-xp.html

Tundub kahtlane, aga võid proovida.


bbad
Pingviini kasutaja
Pingviini kasutaja


Vanus: 46
Liitunud: 16.02.2007
Postitused: 53
Asukoht: Ida-Virumaa
Distributsioon: openSuse 11.4
estonia.gif
postituspostitatud: 29.06.2011, 16:07  postituse pealkiri:  (teema puudub)  

Tänan aitamast, aga kahjuks ei aidanud see ka.
Aga pole hullu, juhatan selle Suse arvutist välja ja proovin mageiat, varem mandrivaga pole probleeme olnud, loodetavasti ei ole ka nüüd


akbgf
Vana Pingviin
Vana Pingviin



Liitunud: 07.10.2009
Postitused: 763
Asukoht: Tõravere
Distributsioon: OpenSUSE, Ubuntu
estonia.gif
postituspostitatud: 30.06.2011, 07:42  postituse pealkiri:  (teema puudub)  

mihkel kirjutas:
Google näitab, et sis190'ga on probleeme enam, kui küll.
[..]
windows topib võrgukaardi "sügavasse unne" ja linux ei suuda kaarti unest üles äratada.

Imelikul kombel on mu OpenSUSE-11.4-l probleeme ka emaplaadile integreeritud RTL8111/8168B gigabit kontrolleriga.
Mõnikord on olnud kontaktne, aga sagedamini ei ole.
Mingit Windowsi pole kunagi masinas olnud.
Kuivõrd kapis oli RTL-8029, panin selle kõrvale ja see töötab.

See, kui SUSE ei suuda kaarti äratada, et siis mõni teine Linux suudab paremini, tundub kahtlane.


Taux007
Pingviini aktivist
Pingviini aktivist



Liitunud: 25.05.2007
Postitused: 204

Distributsioon: Ubuntu 14.04
estonia.gif
postituspostitatud: 01.07.2011, 18:34  postituse pealkiri:  (teema puudub)  

Seade: Huawei E173
Peale installeeritud usb-modeswitch, usb-modeswitch-data ning ka libusb.

Kuidas on nüüd võimalik, et ta üles seadme leiaks ja mulle seda pakuks?

lsusb väljavõte:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0c45:63e0 Microdia Sonix Integrated Webcam
Bus 002 Device 013: ID 12d1:1436 Huawei Technologies Co., Ltd.
Bus 005 Device 004: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse (M-BT58)
Bus 002 Device 014: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 017: ID 19d2:1365 ONDA Communication S.p.A.
Bus 002 Device 016: ID 07ca:8150 AVerMedia Technologies, Inc.

_________________
Look at the dead outside my window..

Näita (aja järgi):      
Postita uus teemaVasta teemale


Vaata järgmist teemat
Vaata eelmist teemat
Powered by phpBB2 Plus based on phpBB © 2001/7 phpBB Group