| Autor |
Sõnum |
hinkus
Pingviini aktivist
Vanus: 53
Liitunud: 07.10.2009
Postitused: 137
Distributsioon: mint 12
|
|
Kas keegi oskab mulle ära seletada milles on minu micro sd kaardiga lahti.
Nimelt lugu järgmine:Mul oli telefonis 8 gb mälukaart,kõik toimis pildid,filmid jne.mõni päev tagasi ostsin 32 gb mälukaardi.Tegin 8gb -sest täieliku koopia ja tõstsin kogu kubatuse 32 gb-sele lisaks lisasin sinna veel peaaegu 20 gb filme. jama on selles,et need filmid kaovad iseenesest 32 selt ise ära, paar tundi ja läinud nad ongi,kaasa arvatud pildid. Muidugi piltidega oli ka oma ette lugu pildistan on kõik pildid alles,paaritunnipärast on pooled pildid vigased ja veel paaritunnipärast olid nad üldse kadunud.
Arvutis kontrollisin veel üle,et kas on ikka 32gb näitab,et on ja telefon näitab ka,et on 32 gb.
Nii palju veel,et need andmed mis olid 8 gb-sel need jäid 32g kaardile alles aga kõik mida hiljem panen need kaovad.
telefoniks siis LG optimus black.
|
|
|
|
|
|
|
    |
imre
Vana Pingviin
Liitunud: 16.08.2005
Postitused: 2648
Asukoht: Saku kant
Distributsioon: Ubuntu
|
|
Pakun välja, et tegu on defektse kaardiga.
Muud mõistliku lahendust pakkuda ei oska.
|
|
|
|
_________________
Enne teema püstitamist kasutage OTSINGUT
Küsi targalt: Infot siit!
Kui aru ei saa, siis küsi.
|
|
|
|
natsa
Vana Pingviin
Vanus: 79
Liitunud: 25.03.2009
Postitused: 536
Asukoht: Kärdla
Distributsioon: LMDE-2 Mate 64-bit
|
|
| Kas sa kaardi telefonis ära formaatisid (vormindasid)?
|
|
|
|
_________________
Kõige parem asi on töötav asi.
|
|
|
|
hinkus
Pingviini aktivist
Vanus: 53
Liitunud: 07.10.2009
Postitused: 137
Distributsioon: mint 12
|
|
telefonis ei formattind,aga arvutis küll.
Aga kas selle kaardi töökorrasolekut saab ka kuidagi arvutis kontrollida,nt. ühendan ta läbi adapteri arvutiga ja kirjutan midagi terminali (kuigi ma ei tea mida)?
|
|
|
|
|
|
|
|
v6lur
Vana Pingviin
Vanus: 37
Liitunud: 08.07.2005
Postitused: 667
Asukoht: Kopenhaagen/Tartu
Distributsioon: Arch
|
|
| Tõenäoliselt vigane kaart. Võid proovida arvutis andmeid kaardile tõsta ja siis näiteks dmesg'i väljundit uurida.
|
|
|
|
_________________
"Sleep, she is for the weak."
|
|
|
|
natsa
Vana Pingviin
Vanus: 79
Liitunud: 25.03.2009
Postitused: 536
Asukoht: Kärdla
Distributsioon: LMDE-2 Mate 64-bit
|
|
| Tsitaat: | | telefonis ei formattind,aga arvutis küll. |
Telefonis vormindamine "tutvustab" kaarti telefonile, praegu on telefon "tuttav" ainult 8 GB-ga.
Kuna teised ütlevad, et kaart on nässus, siis proovida ju ikka võid. 
|
|
|
|
_________________
Kõige parem asi on töötav asi.
|
|
|
|
hinkus
Pingviini aktivist
Vanus: 53
Liitunud: 07.10.2009
Postitused: 137
Distributsioon: mint 12
|
|
| Natsa ma proovin kohe järgi ja annan päevapeale teada.
|
|
|
|
|
|
|
|
Tom
Pingviini aktivist
Vanus: 51
Liitunud: 28.08.2007
Postitused: 222
Distributsioon: Mint, Puppy, Estobuntu 14.04
|
|
| Kas telefon toetab nii suurt kaarti?
|
|
|
|
_________________
dumbuser
|
|
|
|
imre
Vana Pingviin
Liitunud: 16.08.2005
Postitused: 2648
Asukoht: Saku kant
Distributsioon: Ubuntu
|
|
| microSD, up to 32GB toetab see telefon.
|
|
|
|
_________________
Enne teema püstitamist kasutage OTSINGUT
Küsi targalt: Infot siit!
Kui aru ei saa, siis küsi.
|
|
|
|
hinkus
Pingviini aktivist
Vanus: 53
Liitunud: 07.10.2009
Postitused: 137
Distributsioon: mint 12
|
|
no-nii formattisin siis kaardi telefonis ära, tõstsin peale umbes 15 filmi ja mp3.muusikat. tulemus oli siis selline,et mp3 sid ei jäänud ühtegi alles ja filmidest oli võimeline näitama umbes 4.
Juu siis on ikkagi pekkis kaart.
Aga tänud ikkagi kõigile sain jälle mõnekohapealt targemaks.
|
|
|
|
|
|
|
|
Shadow
Vana Pingviin
Vanus: 50
Liitunud: 16.07.2006
Postitused: 453
Distributsioon: Gentoo
|
|
Kui ainult 4 filmi näitas - siis on ju ok ? Teisi äkki ei kopinud lõpuni. Sama mp3 -ga. Äkki kuskilt windooze masin võtta ja proovida.
Filmidega: äkki telefon ikke kõike formaate ei toeta. Näituseks reso liiga suur telefoni jaoks. Või miskine imekoodeks. Kui mkv -sid ei mängi - siis see peaks olema normaalne.
Lapsepõlvest mäletan, et Linuxil oli mingi imelik omadus kopeerida mälupulgale algul ( mis muud ta arvuti jaoks on ) mingisse "puhvrisse". Ja alles siis kui paned paremkliki ja eemalda. Alles siis algab reaalne kopeerimine. Parandab mind kindlasti keegi kui eksin...
|
|
|
|
|
|
|
|
hinkus
Pingviini aktivist
Vanus: 53
Liitunud: 07.10.2009
Postitused: 137
Distributsioon: mint 12
|
|
Tundub,et ikka on kaardi viga sellepärast,et ma panin 8 kb kaardi tagasi ja kõik töötab perfektselt.
aga nagu võlur soovitas siis terminal näitab sihukest asja
[ 0.160876] pnp 00:08: [mem 0xfed20000-0xfed8ffff]
[ 0.160883] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[ 0.161058] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.161067] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.161075] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.161084] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.161093] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.161101] system 00:08: [mem 0xffb00000-0xffbfffff] could not be reserved
[ 0.161111] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.161263] pnp 00:09: [mem 0xffb80000-0xffbfffff]
[ 0.161271] pnp 00:09: [mem 0xfff80000-0xffffffff]
[ 0.161354] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.161485] pnp 00:0a: [mem 0xffc00000-0xfff7ffff]
[ 0.161604] system 00:0a: [mem 0xffc00000-0xfff7ffff] has been reserved
[ 0.161613] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.161849] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.161856] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.161978] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.161987] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.161996] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.162023] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 0.162140] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.162149] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.162588] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.162596] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[ 0.162602] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 0.162609] pnp 00:0d: [mem 0x00100000-0x1f7fffff]
[ 0.162616] pnp 00:0d: [mem 0x00000000-0xffffffff disabled]
[ 0.162761] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.162770] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.162779] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.162787] system 00:0d: [mem 0x00100000-0x1f7fffff] could not be reserved
[ 0.162796] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.163175] pnp: PnP ACPI: found 14 devices
[ 0.163180] ACPI: ACPI bus type pnp unregistered
[ 0.163189] PnPBIOS: Disabled by ACPI PNP
[ 0.202869] pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
[ 0.202882] pci 0000:01:05.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
[ 0.202894] pci 0000:01:05.0: BAR 16: assigned [mem 0x24000000-0x27ffffff]
[ 0.202902] pci 0000:01:05.0: BAR 0: assigned [mem 0xfbf00000-0xfbf00fff]
[ 0.202915] pci 0000:01:05.0: BAR 0: set to [mem 0xfbf00000-0xfbf00fff] (PCI address [0xfbf00000-0xfbf00fff])
[ 0.202924] pci 0000:01:05.0: BAR 13: assigned [io 0xe000-0xe0ff]
[ 0.202931] pci 0000:01:05.0: BAR 14: assigned [io 0xe400-0xe4ff]
[ 0.202939] pci 0000:01:05.0: CardBus bridge to [bus 02-05]
[ 0.202945] pci 0000:01:05.0: bridge window [io 0xe000-0xe0ff]
[ 0.202955] pci 0000:01:05.0: bridge window [io 0xe400-0xe4ff]
[ 0.202965] pci 0000:01:05.0: bridge window [mem 0x20000000-0x23ffffff pref]
[ 0.202975] pci 0000:01:05.0: bridge window [mem 0x24000000-0x27ffffff]
[ 0.202985] pci 0000:00:1e.0: PCI bridge to [bus 01-02]
[ 0.202992] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.203002] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.203012] pci 0000:00:1e.0: bridge window [mem 0x20000000-0x23ffffff pref]
[ 0.203033] pci 0000:00:1e.0: setting latency timer to 64
[ 0.203067] pci 0000:01:05.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.203079] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.203086] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.203094] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.203101] pci_bus 0000:01: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.203108] pci_bus 0000:01: resource 2 [mem 0x20000000-0x23ffffff pref]
[ 0.203116] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.203122] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
[ 0.203130] pci_bus 0000:02: resource 0 [io 0xe000-0xe0ff]
[ 0.203137] pci_bus 0000:02: resource 1 [io 0xe400-0xe4ff]
[ 0.203144] pci_bus 0000:02: resource 2 [mem 0x20000000-0x23ffffff pref]
[ 0.203151] pci_bus 0000:02: resource 3 [mem 0x24000000-0x27ffffff]
[ 0.203248] NET: Registered protocol family 2
[ 0.203406] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.203864] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.204081] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.204275] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.204281] TCP reno registered
[ 0.204288] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.204305] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.204475] NET: Registered protocol family 1
[ 0.204504] pci 0000:00:02.0: Boot video device
[ 0.204623] PCI: CLS 32 bytes, default 64
[ 0.204936] cpufreq-nforce2: No nForce2 chipset.
[ 0.205271] audit: initializing netlink socket (disabled)
[ 0.205299] type=2000 audit(1309073680.200:1): initialized
[ 0.230960] Trying to unpack rootfs image as initramfs...
[ 0.268189] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.273378] VFS: Disk quotas dquot_6.5.2
[ 0.273534] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.281137] fuse init (API version 7.16)
[ 0.281404] msgmni has been set to 950
[ 0.288191] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.288254] io scheduler noop registered
[ 0.288260] io scheduler deadline registered
[ 0.288303] io scheduler cfq registered (default)
[ 0.288638] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.288706] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.289050] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.289177] ACPI: AC Adapter [ADP1] (on-line)
[ 0.289377] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.289391] ACPI: Power Button [PWRB]
[ 0.289523] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.289594] ACPI: Lid Switch [LID0]
[ 0.289723] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.289733] ACPI: Sleep Button [SLPB]
[ 0.289863] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.289873] ACPI: Power Button [PWRF]
[ 0.290304] ACPI: acpi_idle registered with cpuidle
[ 0.306700] ACPI: Invalid active0 threshold
[ 0.320304] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.320312] ACPI: Thermal Zone [THRM] (31 C)
[ 0.320376] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.320542] ERST: Table is not found!
[ 0.320705] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.323876] serial 0000:00:1e.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 0.323890] serial 0000:00:1e.3: PCI INT B disabled
[ 0.328655] isapnp: Scanning for PnP cards...
[ 0.337818] Linux agpgart interface v0.103
[ 0.337973] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 0.338082] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 0.338975] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.339202] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.346862] brd: module loaded
[ 0.401078] loop: module loaded
[ 0.401307] i2c-core: driver [adp5520] using legacy suspend method
[ 0.401314] i2c-core: driver [adp5520] using legacy resume method
[ 0.401547] ata_piix 0000:00:1f.1: version 2.13
[ 0.401589] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.401657] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.404301] scsi0 : ata_piix
[ 0.413147] scsi1 : ata_piix
[ 0.424940] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.424949] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.426031] Fixed MDIO Bus: probed
[ 0.426144] PPP generic driver version 2.4.2
[ 0.426257] tun: Universal TUN/TAP device driver, 1.6
[ 0.426263] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.426487] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.426532] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.426569] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.426639] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.426654] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.426662] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.426777] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.426836] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
[ 0.427168] hub 1-0:1.0: USB hub found
[ 0.427180] hub 1-0:1.0: 2 ports detected
[ 0.427334] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.427347] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.427354] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.427454] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 0.427506] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
[ 0.427815] hub 2-0:1.0: USB hub found
[ 0.427826] hub 2-0:1.0: 2 ports detected
[ 0.427973] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.427985] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.427993] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.432233] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 0.432286] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
[ 0.432594] hub 3-0:1.0: USB hub found
[ 0.432605] hub 3-0:1.0: 2 ports detected
[ 0.432775] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.432789] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.432796] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.432899] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 0.432955] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
[ 0.433261] hub 4-0:1.0: USB hub found
[ 0.433272] hub 4-0:1.0: 2 ports detected
[ 0.433612] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.491046] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.498622] i8042: Detected active multiplexing controller, rev 1.1
[ 0.508300] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.508317] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.508408] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.508490] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.508564] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.508899] mousedev: PS/2 mouse device common for all mice
[ 0.512158] rtc_cmos 00:03: RTC can wake from S4
[ 0.512275] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.512312] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.512549] device-mapper: uevent: version 1.0.3
[ 0.512785] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 0.517250] device-mapper: multipath: version 1.2.0 loaded
[ 0.517258] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.517463] EISA: Probing bus 0 at eisa.0
[ 0.517507] EISA: Detected 0 cards.
[ 0.522323] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.522659] cpuidle: using governor ladder
[ 0.522665] cpuidle: using governor menu
[ 0.523325] TCP cubic registered
[ 0.523693] NET: Registered protocol family 10
[ 0.525113] NET: Registered protocol family 17
[ 0.525154] Registering the dns_resolver key type
[ 0.525228] Using IPI No-Shortcut mode
[ 0.525452] PM: Hibernation image not present or could not be loaded.
[ 0.525476] registered taskstats version 1
[ 0.525873] Magic number: 15:722:572
[ 0.526024] rtc_cmos 00:03: setting system clock to 2011-06-26 07:34:41 UTC (1309073681)
[ 0.526032] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.526037] EDD information not available.
[ 0.744815] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 0.772466] ata1.00: ATA-7: SAMSUNG MP0603H, UD100-19, max UDMA/100
[ 0.772476] ata1.00: 117304992 sectors, multi 16: LBA48
[ 0.772491] ata1.01: ATAPI: PHILIPS DVD+/-RW SDVD8441, PX41, max UDMA/33
[ 0.783833] ata1.00: configured for UDMA/100
[ 0.833766] ata1.01: configured for UDMA/33
[ 0.939960] isapnp: No Plug & Play device found
[ 0.967515] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0603H UD10 PQ: 0 ANSI: 5
[ 0.967988] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.969646] sd 0:0:0:0: [sda] 117304992 512-byte logical blocks: (60.0 GB/55.9 GiB)
[ 0.970814] scsi 0:0:1:0: CD-ROM PHILIPS DVD+-RW SDVD8441 PX41 PQ: 0 ANSI: 5
[ 0.975273] sr0: scsi3-mmc drive: 12x/24x writer cd/rw xa/form2 cdda tray
[ 0.975282] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.975577] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 0.975903] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 0.978206] sd 0:0:0:0: [sda] Write Protect is off
[ 0.978215] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.978283] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.027044] sda: sda1 sda2 < sda5 >
[ 1.027797] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.128607] ACPI: Battery Slot [BAT1] (battery present)
[ 1.204548] Refined TSC clocksource calibration: 798.238 MHz.
[ 1.204560] Switching to clocksource tsc
[ 1.609159] Freeing initrd memory: 12520k freed
[ 1.623698] Freeing unused kernel memory: 700k freed
[ 1.624626] Write protecting the kernel text: 5192k
[ 1.624732] Write protecting the kernel read-only data: 2148k
[ 1.677494] <30>udev[65]: starting version 167
[ 2.167732] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.167781] 8139cp 0000:01:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 2.181500] sdhci: Secure Digital Host Controller Interface driver
[ 2.181507] sdhci: Copyright(c) Pierre Ossman
[ 2.239555] sdhci-pci 0000:01:05.2: SDHCI controller found [1217:7120] (rev 1)
[ 2.239586] sdhci-pci 0000:01:05.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.239631] mmc0: Unknown controller version (16). You may experience problems.
[ 2.239649] mmc0: no vmmc regulator found
[ 2.239721] Registered led device: mmc0::
[ 2.276276] mmc0: SDHCI controller on PCI [0000:01:05.2] using PIO
[ 2.307914] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 2.308029] 8139too 0000:01:03.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.355531] 8139too 0000:01:03.0: eth0: RealTek RTL8139 at 0xe800, 00:13:d3:af:0f:5b, IRQ 22
[ 2.355692] firewire_ohci 0000:01:05.4: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.395559] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.409889] firewire_ohci: Added fw-ohci device 0000:01:05.4, OHCI v1.10, 8 IR + 8 IT contexts, quirks 0x0
[ 2.410925] input: MLK SPEEDLINK as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input5
[ 2.416736] generic-usb 0003:04FC:05DA.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MLK SPEEDLINK] on usb-0000:00:1d.0-1/input0
[ 2.417106] usbcore: registered new interface driver usbhid
[ 2.417113] usbhid: USB HID core driver
[ 2.908259] firewire_core: created device fw0: GUID 00dc10009a2ed900, S400
[ 25.682740] Adding 1466364k swap on /dev/sda5. Priority:-1 extents:1 across:1466364k
[ 25.784550] <30>udev[272]: starting version 167
[ 25.923881] lp: driver loaded but no devices found
[ 25.929128] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 26.742430] type=1400 audit(1309073707.711:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=468 comm="apparmor_parser"
[ 26.767097] type=1400 audit(1309073707.735:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=468 comm="apparmor_parser"
[ 26.785753] type=1400 audit(1309073707.755:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=468 comm="apparmor_parser"
[ 27.285016] eth0: link up, 100Mbps, full-duplex, lpa 0x43E1
[ 27.412062] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 27.422508] ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no)
[ 27.559801] intel_rng: FWH not detected
[ 27.562783] lib80211: common routines for IEEE802.11 drivers
[ 27.562792] lib80211_crypt: registered algorithm 'NULL'
[ 28.333621] type=1400 audit(1309073709.303:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=632 comm="apparmor_parser"
[ 28.356418] type=1400 audit(1309073709.327:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=633 comm="apparmor_parser"
[ 28.358500] type=1400 audit(1309073709.327:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=633 comm="apparmor_parser"
[ 28.359825] type=1400 audit(1309073709.327: : apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=633 comm="apparmor_parser"
[ 28.456215] type=1400 audit(1309073709.427:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=634 comm="apparmor_parser"
[ 28.567704] type=1400 audit(1309073709.535:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=634 comm="apparmor_parser"
[ 28.628193] type=1400 audit(1309073709.599:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=634 comm="apparmor_parser"
[ 28.856478] yenta_cardbus 0000:01:05.0: CardBus bridge found [1462:0121]
[ 28.856506] yenta_cardbus 0000:01:05.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
[ 28.992574] yenta_cardbus 0000:01:05.0: ISA IRQ mask 0x0cb8, PCI irq 19
[ 28.992584] yenta_cardbus 0000:01:05.0: Socket status: 30000006
[ 28.992594] pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #02 to #05
[ 28.992623] yenta_cardbus 0000:01:05.0: pcmcia: parent PCI bridge window: [io 0xe000-0xefff]
[ 28.992633] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xe000-0xefff: excluding 0xe000-0xe0ff 0xe400-0xe4ff 0xe800-0xe8ff
[ 29.297334] yenta_cardbus 0000:01:05.0: pcmcia: parent PCI bridge window: [mem 0xfbf00000-0xfbffffff]
[ 29.297345] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfbf00000-0xfbffffff: excluding 0xfbf00000-0xfbf0ffff 0xfbfe0000-0xfbffffff
[ 29.297377] yenta_cardbus 0000:01:05.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x23ffffff pref]
[ 29.297385] pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x23ffffff: excluding 0x20000000-0x23ffffff
[ 29.561404] [drm] Initialized drm 1.1.0 20060810
[ 29.611826] cfg80211: Calling CRDA to update world regulatory domain
[ 29.629550] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa56eb1, caps: 0x804713/0x0/0x0
[ 29.629867] libipw: 802.11 data/management/control stack, git-1.1.13
[ 29.629874] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 29.672959] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 29.673985] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 29.678814] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 29.680654] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x400-0x41f 0x480-0x4bf 0x4d0-0x4d7
[ 29.681141] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: excluding 0x820-0x87f
[ 29.681524] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 29.682108] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xe0000-0xfffff
[ 29.704872] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 29.705018] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 29.705175] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 29.771170] cfg80211: World regulatory domain updated:
[ 29.771180] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 29.771188] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.771197] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 29.771205] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 29.771212] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.771220] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.157765] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 30.157776] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 30.157991] ipw2200 0000:01:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 30.180540] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 30.607837] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 30.607852] i915 0000:00:02.0: setting latency timer to 64
[ 30.700644] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 30.700653] [drm] Driver supports precise vblank timestamp query.
[ 30.829161] ipw2200: Radio Frequency Kill Switch is On:
[ 30.829168] Kill switch must be turned off for wireless networking to work.
[ 30.892255] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 30.892265] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 30.892273] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 30.892281] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 30.892288] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 30.892296] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 30.892302] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 30.892310] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 30.892317] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 30.892325] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 30.892332] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 30.892340] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 30.892347] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 30.892355] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 30.892362] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 30.892369] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 30.892376] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 30.892384] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 30.892391] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 30.892399] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 30.892406] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 30.892414] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 30.892420] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 30.892428] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 30.892435] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 30.892443] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 30.892450] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 30.892458] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 30.898085] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[ 31.025300] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 31.026583] [drm] initialized overlay support
[ 31.482309] Console: switching to colour frame buffer device 160x50
[ 31.482406] fb0: inteldrmfb frame buffer device
[ 31.482411] drm: registered panic notifier
[ 31.482780] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 31.484428] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 31.484480] Intel ICH 0000:00:1e.2: setting latency timer to 64
[ 31.684108] fixme: max PWM is zero.
[ 32.336024] intel8x0_measure_ac97_clock: measured 55321 usecs (2665 samples)
[ 32.336033] intel8x0: clocking to 48000
[ 33.622303] ppdev: user-space parallel port driver
[ 33.677854] audit_printk_skb: 21 callbacks suppressed
[ 33.677864] type=1400 audit(1309073714.647:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1142 comm="apparmor_parser"
[ 33.692360] type=1400 audit(1309073714.663:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1142 comm="apparmor_parser"
[ 37.226168] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 37.536009] eth0: no IPv6 routers present
[ 38.291816] ipw2200: Failed to send POWER_MODE: Command timed out.
[ 42.882478] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 43.960026] ipw2200: Failed to send POWER_MODE: Command timed out.
[14249.248032] usb 2-1: new full speed USB device using uhci_hcd and address 2
[14252.190131] usbcore: registered new interface driver uas
[14252.354235] Initializing USB Mass Storage driver...
[14252.358036] scsi2 : usb-storage 2-1:1.0
[14252.360533] usbcore: registered new interface driver usb-storage
[14252.360541] USB Mass Storage support registered.
[14253.375275] scsi 2:0:0:0: Direct-Access ChipsBnk SD/MMCReader 4081 PQ: 0 ANSI: 2
[14253.376427] sd 2:0:0:0: Attached scsi generic sg2 type 0
[14253.386249] sd 2:0:0:0: [sdb] 65458176 512-byte logical blocks: (33.5 GB/31.2 GiB)
[14253.389426] sd 2:0:0:0: [sdb] Write Protect is off
[14253.389436] sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[14253.395228] sd 2:0:0:0: [sdb] No Caching mode page present
[14253.395238] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[14253.412571] sd 2:0:0:0: [sdb] No Caching mode page present
[14253.412581] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[14253.419312] sdb: sdb1
[14253.437233] sd 2:0:0:0: [sdb] No Caching mode page present
[14253.437244] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[14253.437253] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[14419.632074] usb 2-1: USB disconnect, address 2
[14432.768030] usb 1-2: new full speed USB device using uhci_hcd and address 3
[14432.940075] scsi3 : usb-storage 1-2:1.0
[14433.950442] scsi 3:0:0:0: Direct-Access ChipsBnk SD/MMCReader 4081 PQ: 0 ANSI: 2
[14433.951578] sd 3:0:0:0: Attached scsi generic sg2 type 0
[14433.961407] sd 3:0:0:0: [sdb] 65458176 512-byte logical blocks: (33.5 GB/31.2 GiB)
[14433.964395] sd 3:0:0:0: [sdb] Write Protect is off
[14433.964405] sd 3:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[14433.970388] sd 3:0:0:0: [sdb] No Caching mode page present
[14433.970398] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[14433.986383] sd 3:0:0:0: [sdb] No Caching mode page present
[14433.986393] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[14433.993816] sdb: sdb1
[14434.012389] sd 3:0:0:0: [sdb] No Caching mode page present
[14434.012400] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[14434.012408] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[14536.440061] usb 1-2: USB disconnect, address 3
[14568.672029] usb 1-2: new full speed USB device using uhci_hcd and address 4
[14568.846476] scsi4 : usb-storage 1-2:1.0
[14569.857938] scsi 4:0:0:0: Direct-Access ChipsBnk SD/MMCReader 4081 PQ: 0 ANSI: 2
[14569.859066] sd 4:0:0:0: Attached scsi generic sg2 type 0
[14569.869924] sd 4:0:0:0: [sdb] 65458176 512-byte logical blocks: (33.5 GB/31.2 GiB)
[14569.872885] sd 4:0:0:0: [sdb] Write Protect is off
[14569.872895] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[14569.878939] sd 4:0:0:0: [sdb] No Caching mode page present
[14569.878950] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[14569.894885] sd 4:0:0:0: [sdb] No Caching mode page present
[14569.894895] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[14569.901308] sdb: sdb1
[14569.919884] sd 4:0:0:0: [sdb] No Caching mode page present
[14569.919895] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[14569.919903] sd 4:0:0:0: [sdb] Attached SCSI removable disk
|
|
|
|
|
|
|
|
erku
Vana Pingviin
Vanus: 55
Liitunud: 12.09.2008
Postitused: 559
Asukoht: Tallinn, Järvamaa
Distributsioon: Mint/Debian _32bit
|
|
Mure kaardiga: SD 4GB (MicroSD/SD). Kaart on kirjutuskaitstud. Hetkel saab kaardile faile lisada, aga kustutada ja formaatida kaarti ei saa.
Proovitud on: erinevaid adaptereid (SD, USB), internetist leiduvat teavet kasutades formaatida terminali abil, GParted, DiskUtility,... Proovitud erinevaid OP süsteeme (Linux, XP, Win7) ja nende võimalusi.
Oli kahtlus et kaart on riknenud, kuid üks võõras arvuti oli võimeline seda formaatima, kuid tulem pole mulle sobilik ning "kirjutuskaitstus" säilis.
Kaart on 4GB, kaardil on MBR, alguses 4MB allutamata ala ja järel 3,69GB FAT32.
Vaja on ilma MBR-ita tühja ketast, mis ei ole kirjutuskaitstud (tehaseseaded).
| Kood: | | [ 6.839834] sd 6:0:0:0: [sdc] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
[ 6.842833] sd 6:0:0:0: [sdc] Write Protect is on |
Terminalis "Write Protect is off" saavutamine, ei muuda aga reaalselt ketast formaaditavaks.
Midagi tõhusat on seega vaja; arvamusi?
|
|
|
|
_________________
Mõttetera: Kui tarkvara ei meeldi või ei sobi, tuleb valida teine tarkvara.
|
|
|
|
spott
Admin
Vanus: 43
Liitunud: 04.06.2005
Postitused: 8857
Distributsioon: Ubuntu
|
|
| kas kaardil riistvaralist lukku pole - või äkki on see üldse küljest ära tulnud?
|
|
|
|
_________________
Tellige endale sünnipäevaks, sõbrapäevaks või muuks tähtpäevaks kingitus: Kingitused internetist - NetiKink.eu
|
|
|
|
erku
Vana Pingviin
Vanus: 55
Liitunud: 12.09.2008
Postitused: 559
Asukoht: Tallinn, Järvamaa
Distributsioon: Mint/Debian _32bit
|
|
MicroSD-l pole lukku, lukk on ainult SD adapteril. Samas on ka proovitud USB adapteris ning tulemus ei muutu.
|
|
|
|
_________________
Mõttetera: Kui tarkvara ei meeldi või ei sobi, tuleb valida teine tarkvara.
|
|
|
|
spott
Admin
Vanus: 43
Liitunud: 04.06.2005
Postitused: 8857
Distributsioon: Ubuntu
|
|
mis selles teises arvutis teistsugust oli, et seal töötas?
Kas usb adapter oli usb2 oma ja panid ka usb2 pesasse?
|
|
|
|
_________________
Tellige endale sünnipäevaks, sõbrapäevaks või muuks tähtpäevaks kingitus: Kingitused internetist - NetiKink.eu
|
|
|
|
sadiini
Vana Pingviin
Vanus: 53
Liitunud: 28.12.2007
Postitused: 1456
Asukoht: Otsige mind kolmandalt planeedilt...
Distributsioon: Lubuntu, Bodhi, Feren OS
|
|
Aga kui pisut nullida?
| Kood: | | dd if=/dev/zero of=/dev/SD/Card/Path |
|
|
|
|
_________________
Hea tarkvara kuulab kasutaja sõna 
|
|
|
|
erku
Vana Pingviin
Vanus: 55
Liitunud: 12.09.2008
Postitused: 559
Asukoht: Tallinn, Järvamaa
Distributsioon: Mint/Debian _32bit
|
|
Mis selles ühes arvutis teisiti, ei oska öelda, aga suutis nagu kaarti käidelda.
On USB2 kõikjal
Nullimine ei õnnestu..
| Kood: | | # dd if=/dev/zero of=/dev/sdc1
dd: kirjutan faili `/dev/sdc1': Operation not permitted
1+0 kirjet sisse
0+0 kirjet välja
0 baiti (0 B) kopeeritud, 0,00090772 s, 0,0 kB/s
# dd if=/dev/zero of=/dev/sdc
dd: avan `/dev/sdc': Read-only file system |
|
|
|
|
_________________
Mõttetera: Kui tarkvara ei meeldi või ei sobi, tuleb valida teine tarkvara.
|
|
|
|
imre
Vana Pingviin
Liitunud: 16.08.2005
Postitused: 2648
Asukoht: Saku kant
Distributsioon: Ubuntu
|
|
Mina ässitaks testdisk'i kallale sellele kaardile.
Vaataks mis seal kaardil üldse on eriti kui MBR'i kasutatud selle peal.
Kui kaardi sisu vaja pole, siis püüa testdiski abil sealt info minema pühkida ja siis nullidega üle lasta.
|
|
|
|
_________________
Enne teema püstitamist kasutage OTSINGUT
Küsi targalt: Infot siit!
Kui aru ei saa, siis küsi.
|
|
|
|
natsa
Vana Pingviin
Vanus: 79
Liitunud: 25.03.2009
Postitused: 536
Asukoht: Kärdla
Distributsioon: LMDE-2 Mate 64-bit
|
|
| erku kirjutas: | | Mis selles ühes arvutis teisiti, ei oska öelda, aga suutis nagu kaarti käidelda. |
Võib-olla mingi mobla tarkvara?
|
|
|
|
_________________
Kõige parem asi on töötav asi.
|
|
|
|
|
|
|
