| sander85 kirjutas: |
| countrymees kirjutas: | Jah...sai. Seni pole enam teadet ilmunud.(loodan, et nii jääbki  )..vara tänasin...hakkas aga jälle teatama, et helikaart ei ole aktiivne... |
Kas dmesg ei näita mingit veidrat käitumist? |
# dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38.7-desktop-1.mga (iurt@ecosse.mageia.org) (gcc version 4.5.2 (GCC) ) #1 SMP Sun May 22 12:29:42 UTC 2011
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002ffc0000 (usable)
BIOS-e820: 000000002ffc0000 - 000000002ffce000 (ACPI data)
BIOS-e820: 000000002ffce000 - 000000002fff0000 (ACPI NVS)
BIOS-e820: 000000002fff0000 - 0000000030000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.3 present.
DMI: ECS K8T890-A/K8T890-A, BIOS 080011 09/28/2005
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x2ffc0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FFE0000000 write-back
1 base 0020000000 mask FFF0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [c00ff780] ff780
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-000000002ffc0000
0000000000 - 0000400000 page 4k
0000400000 - 002fc00000 page 2M
002fc00000 - 002ffc0000 page 4k
kernel direct mapping tables up to 2ffc0000 @ bfa000-c00000
RAMDISK: 2fb75000 - 2ffb0000
ACPI: RSDP 000f87c0 00014 (v00 ACPIAM)
ACPI: RSDT 2ffc0000 00034 (v01 A M I OEMRSDT 09000528 MSFT 00000097)
ACPI: FACP 2ffc0200 00084 (v02 A M I OEMFACP 09000528 MSFT 00000097)
ACPI: DSDT 2ffc0440 045ED (v01 12345 12345123 00000123 INTL 02002026)
ACPI: FACS 2ffce000 00040
ACPI: APIC 2ffc0390 00068 (v01 A M I OEMAPIC 09000528 MSFT 00000097)
ACPI: MCFG 2ffc0400 0003C (v01 A M I OEMMCFG 09000528 MSFT 00000097)
ACPI: OEMB 2ffce040 00046 (v01 A M I AMI_OEM 09000528 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
767MB LOWMEM available.
mapped low ram: 0 - 2ffc0000
low ram: 0 - 2ffc0000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0002ffc0
HighMem empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0002ffc0
On node 0 totalpages: 196431
free_area_init_node: node 0, pgdat c069f200, node_mem_map ef575200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1504 pages used for memmap
Normal zone: 190944 pages, LIFO batch:31
Using APIC driver default
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 30000000:b0000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @ef000000 s27904 r0 d21248 u2097152
pcpu-alloc: s27904 r0 d21248 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194895
Kernel command line: BOOT_IMAGE=linux root=UUID=def84f10-8532-487d-95e3-2986a4894865 nokmsboot resume=UUID=bd6c589e-b3de-466c-8020-751dc3cd85c2 splash=silent vga=788
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 3930560 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00000000:00000000)
Memory: 763452k/786176k available (3557k kernel code, 22272k reserved, 2239k data, 556k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffab5000 - 0xfffff000 (5416 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf07c0000 - 0xff3fe000 ( 236 MB)
lowmem : 0xc0000000 - 0xeffc0000 ( 767 MB)
.init : 0xc06aa000 - 0xc0735000 ( 556 kB)
.data : 0xc047941d - 0xc06a9040 (2239 kB)
.text : 0xc0100000 - 0xc047941d (3557 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
NR_IRQS:2304
CPU 0 irqstacks, hard=ee824000 soft=ee826000
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1800.385 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.77 BogoMIPS (lpj=1800385)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
mce: CPU supports 5 MCE banks
SMP alternatives: switching to UP code
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20110112
ftrace: allocating 15950 entries in 32 pages
Enabling APIC mode: Flat. Using 2 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD Sempron(tm) Processor 3000+ stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
MCE: In-kernel MCE decoding enabled.
Brought up 1 CPUs
Total of 1 processors activated (3600.77 BogoMIPS).
devtmpfs: initialized
Time: 5:32:30 Date: 06/19/11
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 0000000030000000 aka 768M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [30000000, ffffffff]
bus: [00, ff] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0x30000000-0xffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x30000000-0xfff7ffff] (ignored)
pci 0000:00:00.0: [1106:0238] type 0 class 0x000600
pci 0000:00:00.0: reg 10: [mem 0xcc000000-0xcfffffff pref]
pci 0000:00:00.1: [1106:1238] type 0 class 0x000600
pci 0000:00:00.2: [1106:2238] type 0 class 0x000600
pci 0000:00:00.3: [1106:3238] type 0 class 0x000600
pci 0000:00:00.4: [1106:4238] type 0 class 0x000600
pci 0000:00:00.5: [1106:5238] type 0 class 0x000800
pci 0000:00:00.7: [1106:7238] type 0 class 0x000600
pci 0000:00:01.0: [1106:b188] type 1 class 0x000604
pci 0000:00:01.0: supports D1
pci 0000:00:02.0: [1106:a238] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: [1106:c238] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.1: [1106:d238] type 1 class 0x000604
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: PME# disabled
pci 0000:00:03.2: [1106:e238] type 1 class 0x000604
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:03.3: [1106:f238] type 1 class 0x000604
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:08.0: [1412:1724] type 0 class 0x000401
pci 0000:00:08.0: reg 10: [io 0xd400-0xd41f]
pci 0000:00:08.0: reg 14: [io 0xd000-0xd07f]
pci 0000:00:08.0: supports D2
pci 0000:00:0f.0: [1106:3149] type 0 class 0x000104
pci 0000:00:0f.0: reg 10: [io 0xec00-0xec07]
pci 0000:00:0f.0: reg 14: [io 0xe800-0xe803]
pci 0000:00:0f.0: reg 18: [io 0xe400-0xe407]
pci 0000:00:0f.0: reg 1c: [io 0xe000-0xe003]
pci 0000:00:0f.0: reg 20: [io 0xdc00-0xdc0f]
pci 0000:00:0f.0: reg 24: [io 0xd800-0xd8ff]
pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f]
pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.0: reg 20: [io 0xcc00-0xcc1f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.1: reg 20: [io 0xc800-0xc81f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.2: reg 20: [io 0xc400-0xc41f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.3: reg 20: [io 0xc000-0xc01f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
pci 0000:00:10.4: reg 10: [mem 0xfebffc00-0xfebffcff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
pci 0000:00:11.0: [1106:3227] type 0 class 0x000601
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
pci 0000:00:12.0: reg 10: [io 0xb800-0xb8ff]
pci 0000:00:12.0: reg 14: [mem 0xfebff800-0xfebff8ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
PCI: peer root bus 00 res updated from pci conf
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: [10de:06e4] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:02:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0xac00-0xac7f]
pci 0000:02:00.0: reg 30: [mem 0xfeae0000-0xfeafffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
pci 0000:00:02.0: bridge window [mem 0xf8a00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xa7e00000-0xc7efffff pref]
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.1: PCI bridge to [bus 04-04]
pci 0000:00:03.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:03.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.2: PCI bridge to [bus 05-05]
pci 0000:00:03.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:03.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.3: PCI bridge to [bus 06-06]
pci 0000:00:03.3: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:03.3: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP3._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000002ffc0000 - 000000002fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x30000000-0xfff7ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io 0x0000-0x000f]
pnp 00:01: [io 0x0081-0x0083]
pnp 00:01: [io 0x0087]
pnp 00:01: [io 0x0089-0x008b]
pnp 00:01: [io 0x008f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x0070-0x0071]
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io 0x0060]
pnp 00:03: [io 0x0064]
pnp 00:03: [irq 1]
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x03f0-0x03f5]
pnp 00:06: [io 0x03f7]
pnp 00:06: [irq 6]
pnp 00:06: [dma 2]
pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:07: [io 0x0378-0x037f]
pnp 00:07: [io 0x0778-0x077f]
pnp 00:07: [irq 7]
pnp 00:07: [dma 3]
pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:08: [io 0x0000-0xffffffff disabled]
pnp 00:08: [io 0x0a00-0x0a0f]
pnp 00:08: [io 0x0290-0x029f]
pnp 00:08: [io 0x0a20-0x0a2f]
pnp 00:08: [io 0x0a30-0x0a3f]
pnp 00:08: [io 0x0a40-0x0a4f]
system 00:08: [io 0x0a00-0x0a0f] has been reserved
system 00:08: [io 0x0290-0x029f] has been reserved
system 00:08: [io 0x0a20-0x0a2f] has been reserved
system 00:08: [io 0x0a30-0x0a3f] has been reserved
system 00:08: [io 0x0a40-0x0a4f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0022-0x003f]
pnp 00:09: [io 0x0044-0x005f]
pnp 00:09: [io 0x0062-0x0063]
pnp 00:09: [io 0x0065-0x006f]
pnp 00:09: [io 0x0072-0x007f]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x0084-0x0086]
pnp 00:09: [io 0x0088]
pnp 00:09: [io 0x008c-0x008e]
pnp 00:09: [io 0x0090-0x009f]
pnp 00:09: [io 0x00a2-0x00bf]
pnp 00:09: [io 0x00e0-0x00ef]
pnp 00:09: [io 0x03e0-0x03e7]
pnp 00:09: [mem 0xffb80000-0xffbfffff]
pnp 00:09: [mem 0xfff00000-0xfff7fffe]
pnp 00:09: [io 0x04d0-0x04d1]
pnp 00:09: [io 0x0800-0x087f]
pnp 00:09: [io 0x0400-0x041f]
pnp 00:09: [io 0x0000-0xffffffff disabled]
system 00:09: [io 0x03e0-0x03e7] has been reserved
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: [io 0x0800-0x087f] has been reserved
system 00:09: [io 0x0400-0x041f] has been reserved
system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:09: [mem 0xfff00000-0xfff7fffe] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: [mem 0xfee00000-0xfee00fff]
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io 0x03f8-0x03ff]
pnp 00:0b: [irq 4]
pnp 00:0b: [dma 0 disabled]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [mem 0xe0000000-0xefffffff]
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x000c0000-0x000cffff]
pnp 00:0d: [mem 0x000e0000-0x000fffff]
pnp 00:0d: [mem 0x00100000-0x2fffffff]
pnp 00:0d: [mem 0xfff80000-0xffffffff]
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0x2fffffff] could not be reserved
system 00:0d: [mem 0xfff80000-0xffffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
Switching to clocksource acpi_pm
pci 0000:00:03.0: BAR 14: assigned [mem 0x30000000-0x301fffff]
pci 0000:00:03.0: BAR 15: assigned [mem 0x30200000-0x303fffff pref]
pci 0000:00:03.1: BAR 14: assigned [mem 0x30400000-0x305fffff]
pci 0000:00:03.1: BAR 15: assigned [mem 0x30600000-0x307fffff pref]
pci 0000:00:03.2: BAR 14: assigned [mem 0x30800000-0x309fffff]
pci 0000:00:03.2: BAR 15: assigned [mem 0x30a00000-0x30bfffff pref]
pci 0000:00:03.3: BAR 14: assigned [mem 0x30c00000-0x30dfffff]
pci 0000:00:03.3: BAR 15: assigned [mem 0x30e00000-0x30ffffff pref]
pci 0000:00:03.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:03.1: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:03.2: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:03.3: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
pci 0000:00:02.0: bridge window [mem 0xf8a00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xa7e00000-0xc7efffff pref]
pci 0000:00:03.0: PCI bridge to [bus 03-03]
Switched to NOHz mode on CPU #0
pci 0000:00:03.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:03.0: bridge window [mem 0x30000000-0x301fffff]
pci 0000:00:03.0: bridge window [mem 0x30200000-0x303fffff pref]
pci 0000:00:03.1: PCI bridge to [bus 04-04]
pci 0000:00:03.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:03.1: bridge window [mem 0x30400000-0x305fffff]
pci 0000:00:03.1: bridge window [mem 0x30600000-0x307fffff pref]
pci 0000:00:03.2: PCI bridge to [bus 05-05]
pci 0000:00:03.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:03.2: bridge window [mem 0x30800000-0x309fffff]
pci 0000:00:03.2: bridge window [mem 0x30a00000-0x30bfffff pref]
pci 0000:00:03.3: PCI bridge to [bus 06-06]
pci 0000:00:03.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:03.3: bridge window [mem 0x30c00000-0x30dfffff]
pci 0000:00:03.3: bridge window [mem 0x30e00000-0x30ffffff pref]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: enabling device (0106 -> 0107)
pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:03.1: enabling device (0106 -> 0107)
pci 0000:00:03.1: PCI INT B -> GSI 31 (level, low) -> IRQ 31
pci 0000:00:03.1: setting latency timer to 64
pci 0000:00:03.2: enabling device (0106 -> 0107)
pci 0000:00:03.2: PCI INT C -> GSI 39 (level, low) -> IRQ 39
pci 0000:00:03.2: setting latency timer to 64
pci 0000:00:03.3: enabling device (0106 -> 0107)
pci 0000:00:03.3: PCI INT D -> GSI 31 (level, low) -> IRQ 31
pci 0000:00:03.3: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 6 [mem 0x30000000-0xffffffff]
pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xf8a00000-0xfeafffff]
pci_bus 0000:02: resource 2 [mem 0xa7e00000-0xc7efffff pref]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0x30000000-0x301fffff]
pci_bus 0000:03: resource 2 [mem 0x30200000-0x303fffff pref]
pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0x30400000-0x305fffff]
pci_bus 0000:04: resource 2 [mem 0x30600000-0x307fffff pref]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0x30800000-0x309fffff]
pci_bus 0000:05: resource 2 [mem 0x30a00000-0x30bfffff pref]
pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:06: resource 1 [mem 0x30c00000-0x30dfffff]
pci_bus 0000:06: resource 2 [mem 0x30e00000-0x30ffffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:00:02.0: MSI quirk detected; subordinate MSI disabled
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 4332k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1308461550.315:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1499
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 64 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 65 for MSI/MSI-X
pcieport 0000:00:03.1: setting latency timer to 64
pcieport 0000:00:03.1: irq 66 for MSI/MSI-X
pcieport 0000:00:03.2: setting latency timer to 64
pcieport 0000:00:03.2: irq 67 for MSI/MSI-X
pcieport 0000:00:03.3: setting latency timer to 64
pcieport 0000:00:03.3: irq 68 for MSI/MSI-X
vesafb: framebuffer at 0xfb000000, mapped to 0xf0800000, using 1875k, total 14336k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:c300
vesafb: pmi: set display start = c00cc363, set palette = c00cc3be
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
ERST: Table is not found!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
isapnp: Scanning for PnP cards...
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
agpgart-amd64 0000:00:00.0: AGP bridge [1106/0238]
agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xcc000000
brd: module loaded
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Checking hibernation image partition UUID=bd6c589e-b3de-466c-8020-751dc3cd85c2
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
isapnp: No Plug & Play device found
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 15:432:517
rtc_cmos 00:02: setting system clock to 2011-06-19 05:32:31 UTC (1308461551)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 556k freed
Write protecting the kernel text: 3560k
Write protecting the kernel read-only data: 1636k
nash-hotplug (37): /proc/37/oom_adj is deprecated, please use /proc/37/oom_score_adj instead.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebffc00
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38.7-desktop-1.mga ehci_hcd
usb usb1: SerialNumber: 0000:00:10.4
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000cc00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38.7-desktop-1.mga uhci_hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.38.7-desktop-1.mga uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c400
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.38.7-desktop-1.mga uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.38.7-desktop-1.mga uhci_hcd
usb usb5: SerialNumber: 0000:00:10.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
sata_via 0000:00:0f.0: version 2.6
sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
sata_via 0000:00:0f.0: routed to hard irq line 11
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20
ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20
ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
usb 3-1: new low speed USB device using uhci_hcd and address 2
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 3-1: New USB device found, idVendor=04fc, idProduct=0538
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Trust Spyker F1 mouse
usb 3-1: Manufacturer: MLK
ata2.00: ATA-7: SAMSUNG HD160JJ, ZM100-41, max UDMA7
ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
input: MLK Trust Spyker F1 mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input1
generic-usb 0003:04FC:0538.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MLK Trust Spyker F1 mouse] on usb-0000:00:10.1-1/input0
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD160JJ ZM10 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: detected capacity change from 0 to 160041885696
sda: sda1 sda2 < sda5 sda6 >
sd 1:0:0:0: [sda] Attached SCSI disk
pata_via 0000:00:0f.1: version 0.3.4
pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
scsi2 : pata_via
scsi3 : pata_via
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
usb 3-2: new full speed USB device using uhci_hcd and address 3
ata3.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB06, max UDMA/33
ata3.01: ATAPI: DVD-RW IDE1108, VER B430, max UDMA/66
ata3.00: configured for UDMA/33
ata3.01: configured for UDMA/66
scsi 2:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182D SB06 PQ: 0 ANSI: 5
scsi 2:0:1:0: CD-ROM DVDRW IDE1108 B430 PQ: 0 ANSI: 5
usb 3-2: New USB device found, idVendor=076b, idProduct=1021
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Smart Card Reader USB
usb 3-2: Manufacturer: OMNIKEY
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[125]: starting version 166
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
via-rhine.c:v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ACPI: acpi_idle registered with cpuidle
eth0: VIA Rhine II at 0x1b800, 00:14:2a:ee:b2:72, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 1:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
scsi 2:0:1:0: Attached scsi generic sg2 type 5
FDC 0 is a post-1991 82077
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 1x/40x writer cd/rw xa/form2 cdda tray
sr 2:0:1:0: Attached scsi CD-ROM sr1
IT8705 SuperIO detected.
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
ppdev: user-space parallel port driver
ICE1724 0000:00:08.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ice1724: Invalid EEPROM version 1
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
nvidia 0000:02:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module 270.41.19 Mon May 16 23:31:36 PDT 2011
powernow-k8: Found 1 AMD Sempron(tm) Processor 3000+ (1 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6
powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised:
dm-devel@redhat.com
EXT4-fs (sda1): re-mounted. Opts: acl
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl
loop: module loaded
Adding 4088504k swap on /dev/sda5. Priority:-1 extents:1 across:4088504k
NET: Registered protocol family 10
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
NET: Registered protocol family 17
eth0: no IPv6 routers present
ata2.00: configured for UDMA/133
ata2: EH complete
EXT4-fs (sda1): re-mounted. Opts: acl,commit=0
EXT4-fs (sda6): re-mounted. Opts: acl,commit=0
fuse init (API version 7.16)
SEE NÜÜD VAHETULT PEALE PROBLEEMI!
