| Autor |
Sõnum |
parimmax
Pingviini aktivist
Vanus: 59
Liitunud: 21.03.2009
Postitused: 367
Distributsioon: estobuntu,ubuntu
|
|
jutt puudutab siis varasema teemana juttu olnud kõvakettaid: http://pingviin.org/ftopic6838.html
panin ubuntu 160 gb kettale ja 500 gb ketta tegin tühjaks (neist oli seal juttu) nüüd selgub et 500 on aihtunud - mitte ükski utiliit seda ei näita ja ka muul moel käima ei saa. livena saab seal kettal ubuntu küll jooksma kuid installimisel on ketta koht tühi st pole kuhugi ntsallida.oma arust midagi valesti ei teinud kuid jama on majas.oleks kelegi mõtteid mida teha?
|
|
|
|
|
|
|
  |
bobc
Pingviini aktivist
Vanus: 43
Liitunud: 09.07.2005
Postitused: 165
Asukoht: undef
Distributsioon: SouRCe64 GNU/Linux
|
|
Esmalt vaata mida kuvatakse:
| Kood: | | cat /proc/partitions |
Ja ka dmesg ei tee liiga.
Kuna see usb kettas siis lae ka usb modulid ülesse (kui neid ei laeta sinu eest).
| Kood: | | modprobe uhci_hcd
modprobe ehci_hcd
modprobe usbcore
modprobe usb-storage |
PS. Oletasin, et intel või via kiviga emaplaat.
nüüd vaata uuesti /proc/partitions
või dmesg
Edu diagnoosimisel, ei oska oletada hetkel milles sul seal see tõrge seisneb, samas puudub ka info nii riistvara kui ka selle hdd kohta.
|
|
|
|
_________________
|
|
|
|
parimmax
Pingviini aktivist
Vanus: 59
Liitunud: 21.03.2009
Postitused: 367
Distributsioon: estobuntu,ubuntu
|
|
parimmax@parimmax-desktop:~$ cat /proc/partitions
major minor #blocks name
8 0 156290904 sda
8 1 24410736 sda1
8 2 1 sda2
8 5 1951866 sda5
8 6 129925656 sda6
251 0 256556 ramzswap0
[ 0.036415] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078681] CPU0: Intel(R) Pentium(R) D CPU 2.66GHz stepping 07
[ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5320.15 BogoMIPS (lpj=10640301)
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 4 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.165048] CPU1: Intel(R) Pentium(R) D CPU 2.66GHz stepping 07
[ 0.165067] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168023] Brought up 2 CPUs
[ 0.168029] Total of 2 processors activated (10639.84 BogoMIPS).
[ 0.168084] CPU0 attaching sched-domain:
[ 0.168089] domain 0: span 0-1 level CPU
[ 0.168093] groups: 0 1
[ 0.168102] CPU1 attaching sched-domain:
[ 0.168105] domain 0: span 0-1 level CPU
[ 0.168108] groups: 1 0
[ 0.168199] Booting paravirtualized kernel on bare hardware
[ 0.168314] regulator: core version 0.5
[ 0.168314] Time: 20:59:07 Date: 02/05/10
[ 0.168314] NET: Registered protocol family 16
[ 0.168314] EISA bus registered
[ 0.168325] ACPI: bus type pci registered
[ 0.168425] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
[ 0.168430] PCI: Not using MMCONFIG.
[ 0.168531] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[ 0.168534] PCI: Using configuration type 1 for base access
[ 0.170062] bio: create slab <bio-0> at 0
[ 0.172958] ACPI: EC: Look up EC in DSDT
[ 0.186142] ACPI: Interpreter enabled
[ 0.186149] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.186186] ACPI: Using IOAPIC for interrupt routing
[ 0.186257] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
[ 0.207440] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[ 0.207446] PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.207449] PCI: Using MMCONFIG for extended config space
[ 0.218565] ACPI Warning: Incorrect checksum in table [OEMB] - F0, should be E9 20090521 tbutils-246
[ 0.218723] ACPI: No dock devices found.
[ 0.218900] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.219067] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.219073] pci 0000:00:01.0: PME# disabled
[ 0.219170] pci 0000:00:1d.0: reg 20 io port: [0xe080-0xe09f]
[ 0.219239] pci 0000:00:1d.1: reg 20 io port: [0xe000-0xe01f]
[ 0.219306] pci 0000:00:1d.2: reg 20 io port: [0xdc00-0xdc1f]
[ 0.219374] pci 0000:00:1d.3: reg 20 io port: [0xd880-0xd89f]
[ 0.219448] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebffc00-0xfebfffff]
[ 0.219516] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.219522] pci 0000:00:1d.7: PME# disabled
[ 0.219630] pci 0000:00:1e.2: reg 10 io port: [0xd400-0xd4ff]
[ 0.219639] pci 0000:00:1e.2: reg 14 io port: [0xd800-0xd83f]
[ 0.219648] pci 0000:00:1e.2: reg 18 32bit mmio: [0xfebff800-0xfebff9ff]
[ 0.219657] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xfebff400-0xfebff4ff]
[ 0.219695] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.219701] pci 0000:00:1e.2: PME# disabled
[ 0.219807] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.219815] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.219820] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.219826] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.219886] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.219896] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.219906] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.219915] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.219924] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.219982] pci 0000:00:1f.2: reg 10 io port: [0xec00-0xec07]
[ 0.220006] pci 0000:00:1f.2: reg 14 io port: [0xe880-0xe883]
[ 0.220015] pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807]
[ 0.220023] pci 0000:00:1f.2: reg 1c io port: [0xe480-0xe483]
[ 0.220032] pci 0000:00:1f.2: reg 20 io port: [0xe400-0xe40f]
[ 0.220066] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.220072] pci 0000:00:1f.2: PME# disabled
[ 0.220132] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.220210] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.220224] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.220237] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
[ 0.220250] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe9e0000-0xfe9fffff]
[ 0.220340] pci 0000:00:01.0: bridge 32bit mmio: [0xfa900000-0xfe9fffff]
[ 0.220348] pci 0000:00:01.0: bridge 64bit mmio pref: [0xcff00000-0xefefffff]
[ 0.220402] pci 0000:02:04.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.220412] pci 0000:02:04.0: reg 14 32bit mmio: [0xfeaffc00-0xfeaffcff]
[ 0.220446] pci 0000:02:04.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff]
[ 0.220472] pci 0000:02:04.0: supports D1 D2
[ 0.220475] pci 0000:02:04.0: PME# supported from D1 D2 D3hot D3cold
[ 0.220481] pci 0000:02:04.0: PME# disabled
[ 0.220536] pci 0000:00:1e.0: transparent bridge
[ 0.220542] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[ 0.220548] pci 0000:00:1e.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.220568] pci_bus 0000:00: on NUMA node 0
[ 0.220574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.220742] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.224266] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.224428] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.224589] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.224746] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.224905] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.225062] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.225224] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.225383] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.225663] SCSI subsystem initialized
[ 0.225705] libata version 3.00 loaded.
[ 0.225705] usbcore: registered new interface driver usbfs
[ 0.225705] usbcore: registered new interface driver hub
[ 0.225705] usbcore: registered new device driver usb
[ 0.225705] ACPI: WMI: Mapper loaded
[ 0.225705] PCI: Using ACPI for IRQ routing
[ 0.236013] Bluetooth: Core ver 2.15
[ 0.236035] NET: Registered protocol family 31
[ 0.236035] Bluetooth: HCI device and connection manager initialized
[ 0.236035] Bluetooth: HCI socket layer initialized
[ 0.236035] NetLabel: Initializing
[ 0.236035] NetLabel: domain hash size = 128
[ 0.236035] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.236054] NetLabel: unlabeled traffic allowed by default
[ 0.236184] hpet clockevent registered
[ 0.236189] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.236196] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.236204] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.252016] pnp: PnP ACPI init
[ 0.252040] ACPI: bus type pnp registered
[ 0.258753] pnp: PnP ACPI: found 17 devices
[ 0.258757] ACPI: ACPI bus type pnp unregistered
[ 0.258762] PnPBIOS: Disabled by ACPI PNP
[ 0.258778] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.258793] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.258798] system 00:09: ioport range 0x800-0x87f has been reserved
[ 0.258802] system 00:09: ioport range 0x400-0x41f has been reserved
[ 0.258806] system 00:09: ioport range 0x480-0x4bf has been reserved
[ 0.258810] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.258815] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.258824] system 00:0b: iomem range 0xffc00000-0xfff7ffff has been reserved
[ 0.258833] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.258837] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.258847] system 00:0e: ioport range 0xa00-0xa0f has been reserved
[ 0.258856] system 00:0f: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.258865] system 00:10: iomem range 0x0-0x9ffff could not be reserved
[ 0.258870] system 00:10: iomem range 0xc0000-0xcffff could not be reserved
[ 0.258874] system 00:10: iomem range 0xe0000-0xfffff could not be reserved
[ 0.258878] system 00:10: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.293624] AppArmor: AppArmor Filesystem Enabled
[ 0.293649] pci 0000:02:04.0: BAR 6: address space collision on of device [0xfeac0000-0xfeadffff]
[ 0.293677] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.293680] pci 0000:00:01.0: IO window: disabled
[ 0.293687] pci 0000:00:01.0: MEM window: 0xfa900000-0xfe9fffff
[ 0.293693] pci 0000:00:01.0: PREFETCH window: 0x000000cff00000-0x000000efefffff
[ 0.293702] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.293707] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 0.293714] pci 0000:00:1e.0: MEM window: 0xfea00000-0xfeafffff
[ 0.293720] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x400fffff
[ 0.293734] alloc irq_desc for 16 on node -1
[ 0.293738] alloc kstat_irqs on node -1
[ 0.293746] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.293752] pci 0000:00:01.0: setting latency timer to 64
[ 0.293762] pci 0000:00:1e.0: setting latency timer to 64
[ 0.293768] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.293772] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.293776] pci_bus 0000:01: resource 1 mem: [0xfa900000-0xfe9fffff]
[ 0.293780] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xefefffff]
[ 0.293784] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.293787] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.293791] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x400fffff]
[ 0.293794] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.293798] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.293854] NET: Registered protocol family 2
[ 0.294003] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.294487] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.295069] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.295430] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.295433] TCP reno registered
[ 0.295589] NET: Registered protocol family 1
[ 0.295686] Trying to unpack rootfs image as initramfs...
[ 0.610454] Freeing initrd memory: 9022k freed
[ 0.617263] cpufreq-nforce2: No nForce2 chipset.
[ 0.617305] Scanning for low memory corruption every 60 seconds
[ 0.617448] audit: initializing netlink socket (disabled)
[ 0.617469] type=2000 audit(1265403547.616:1): initialized
[ 0.627362] highmem bounce pool size: 64 pages
[ 0.627371] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.629461] VFS: Disk quotas dquot_6.5.2
[ 0.629547] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.630365] fuse init (API version 7.12)
[ 0.630492] msgmni has been set to 1731
[ 0.630832] alg: No test for stdrng (krng)
[ 0.630865] io scheduler noop registered
[ 0.630868] io scheduler anticipatory registered
[ 0.630871] io scheduler deadline registered
[ 0.630938] io scheduler cfq registered (default)
[ 0.631062] pci 0000:01:00.0: Boot video device
[ 0.631221] alloc irq_desc for 24 on node -1
[ 0.631225] alloc kstat_irqs on node -1
[ 0.631238] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.631248] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.631361] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.631400] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.631589] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.631594] ACPI: Power Button [PWRF]
[ 0.631684] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.631688] ACPI: Power Button [PWRB]
[ 0.632271] processor LNXCPU:00: registered as cooling_device0
[ 0.632277] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.632437] processor LNXCPU:01: registered as cooling_device1
[ 0.636233] isapnp: Scanning for PnP cards...
[ 0.737139] Switched to high resolution mode on CPU 1
[ 0.740034] Switched to high resolution mode on CPU 0
[ 0.989757] isapnp: No Plug & Play device found
[ 0.991386] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.991508] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.991620] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.992025] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.992194] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.993814] brd: module loaded
[ 0.994488] loop: module loaded
[ 0.994597] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.994752] ata_piix 0000:00:1f.1: version 2.13
[ 0.994770] alloc irq_desc for 18 on node -1
[ 0.994773] alloc kstat_irqs on node -1
[ 0.994783] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.994835] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.994945] scsi0 : ata_piix
[ 0.995079] scsi1 : ata_piix
[ 0.997146] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.997151] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.997189] alloc irq_desc for 19 on node -1
[ 0.997193] alloc kstat_irqs on node -1
[ 0.997201] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.997211] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.997270] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.997362] scsi2 : ata_piix
[ 0.997452] scsi3 : ata_piix
[ 0.997467] ata2: port disabled. ignoring.
[ 0.997508] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
[ 0.997512] ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
[ 0.998800] Fixed MDIO Bus: probed
[ 0.998853] PPP generic driver version 2.4.2
[ 0.998996] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.999022] alloc irq_desc for 23 on node -1
[ 0.999025] alloc kstat_irqs on node -1
[ 0.999032] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.999050] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.999056] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.999097] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.999104] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.003011] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.003020] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 1.003037] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
[ 1.016011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.016127] usb usb1: configuration #1 chosen from 1 choice
[ 1.016171] hub 1-0:1.0: USB hub found
[ 1.016182] hub 1-0:1.0: 8 ports detected
[ 1.016272] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.016298] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.016337] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.016346] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.016351] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.016393] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.016421] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e080
[ 1.016531] usb usb2: configuration #1 chosen from 1 choice
[ 1.016572] hub 2-0:1.0: USB hub found
[ 1.016582] hub 2-0:1.0: 2 ports detected
[ 1.016648] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.016656] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.016661] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.016707] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.016735] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
[ 1.016840] usb usb3: configuration #1 chosen from 1 choice
[ 1.016879] hub 3-0:1.0: USB hub found
[ 1.016889] hub 3-0:1.0: 2 ports detected
[ 1.016957] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.016966] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.016970] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.017011] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.017048] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dc00
[ 1.017155] usb usb4: configuration #1 chosen from 1 choice
[ 1.017198] hub 4-0:1.0: USB hub found
[ 1.017207] hub 4-0:1.0: 2 ports detected
[ 1.017276] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.017285] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.017289] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.017335] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.017371] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 1.017476] usb usb5: configuration #1 chosen from 1 choice
[ 1.017519] hub 5-0:1.0: USB hub found
[ 1.017529] hub 5-0:1.0: 2 ports detected
[ 1.017671] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.017674] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.018073] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.018179] mice: PS/2 mouse device common for all mice
[ 1.018316] rtc_cmos 00:03: RTC can wake from S4
[ 1.018366] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.018399] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.018557] device-mapper: uevent: version 1.0.3
[ 1.018696] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.018815] device-mapper: multipath: version 1.1.0 loaded
[ 1.018820] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.018989] EISA: Probing bus 0 at eisa.0
[ 1.019023] EISA: Detected 0 cards.
[ 1.019164] cpuidle: using governor ladder
[ 1.019168] cpuidle: using governor menu
[ 1.019970] TCP cubic registered
[ 1.020178] NET: Registered protocol family 10
[ 1.020891] lo: Disabled Privacy Extensions
[ 1.021397] NET: Registered protocol family 17
[ 1.021423] Bluetooth: L2CAP ver 2.13
[ 1.021426] Bluetooth: L2CAP socket layer initialized
[ 1.021430] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.021432] Bluetooth: SCO socket layer initialized
[ 1.021483] Bluetooth: RFCOMM TTY layer initialized
[ 1.021487] Bluetooth: RFCOMM socket layer initialized
[ 1.021490] Bluetooth: RFCOMM ver 1.11
[ 1.021538] Using IPI No-Shortcut mode
[ 1.021631] PM: Resume from disk failed.
[ 1.021649] registered taskstats version 1
[ 1.021788] Magic number: 14:912:1002
[ 1.021819] pnp 00:04: hash matches
[ 1.021882] rtc_cmos 00:03: setting system clock to 2010-02-05 20:59:08 UTC (1265403548)
[ 1.021887] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.021890] EDD information not available.
[ 1.035474] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.160492] ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB06, max UDMA/33
[ 1.168532] ata3.00: ATA-7: SAMSUNG HD160JJ, ZM100-41, max UDMA7
[ 1.168537] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.176251] ata1.00: configured for UDMA/33
[ 1.177686] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182M SB06 PQ: 0 ANSI: 5
[ 1.184312] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.184317] Uniform CD-ROM driver Revision: 3.20
[ 1.184439] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.184517] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.200381] ata3.00: configured for UDMA/133
[ 1.200516] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD160JJ ZM10 PQ: 0 ANSI: 5
[ 1.200711] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.200729] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.200793] sd 2:0:0:0: [sda] Write Protect is off
[ 1.200798] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.200837] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.201025] sda: sda1 sda2 < sda5 sda6 >
[ 1.224432] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.512015] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 1.687573] usb 2-1: configuration #1 chosen from 1 choice
[ 6.044012] ata4: link is slow to respond, please be patient (ready=0)
[ 11.028012] ata4: device not ready (errno=-16), forcing hardreset
[ 16.224011] ata4: link is slow to respond, please be patient (ready=0)
[ 21.040012] ata4: SRST failed (errno=-16)
[ 26.236011] ata4: link is slow to respond, please be patient (ready=0)
[ 31.052012] ata4: SRST failed (errno=-16)
[ 36.248011] ata4: link is slow to respond, please be patient (ready=0)
[ 66.096011] ata4: SRST failed (errno=-16)
[ 71.124011] ata4: SRST failed (errno=-16)
[ 71.124015] ata4: reset failed, giving up
[ 71.124049] Freeing unused kernel memory: 540k freed
[ 71.124573] Write protecting the kernel text: 4580k
[ 71.124639] Write protecting the kernel read-only data: 1840k
[ 71.274239] ramzswap: disk size set to 256556 kB
[ 71.325699] Linux agpgart interface v0.103
[ 71.407119] Adding 256552k swap on /dev/ramzswap0. Priority:100 extents:1 across:256552k SSD
[ 71.437165] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 71.437193] alloc irq_desc for 20 on node -1
[ 71.437197] alloc kstat_irqs on node -1
[ 71.437208] r8169 0000:02:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 71.437241] r8169 0000:02:04.0: no PCI Express capability
[ 71.438212] eth0: RTL8169sc/8110sc at 0xf818ac00, 00:16:17:b6:85:a9, XID 18000000 IRQ 20
[ 71.446240] usbcore: registered new interface driver hiddev
[ 71.467140] input: MLK Defender 2.4GHz mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
[ 71.467316] generic-usb 0003:04FC:0538.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [MLK Defender 2.4GHz mouse] on usb-0000:00:1d.0-1/input0
[ 71.467342] usbcore: registered new interface driver usbhid
[ 71.467347] usbhid: v2.6:USB HID core driver
[ 72.250390] xor: automatically using best checksumming function: pIII_sse
[ 72.268009] pIII_sse : 4032.000 MB/sec
[ 72.268013] xor: using function: pIII_sse (4032.000 MB/sec)
[ 72.271510] device-mapper: dm-raid45: initialized v0.2594b
[ 72.289640] md: linear personality registered for level -1
[ 72.293507] md: multipath personality registered for level -4
[ 72.297181] md: raid0 personality registered for level 0
[ 72.302340] md: raid1 personality registered for level 1
[ 72.306241] async_tx: api initialized (async)
[ 72.376044] raid6: int32x1 742 MB/s
[ 72.444048] raid6: int32x2 671 MB/s
[ 72.512030] raid6: int32x4 669 MB/s
[ 72.580073] raid6: int32x8 490 MB/s
[ 72.648012] raid6: mmxx1 1622 MB/s
[ 72.716006] raid6: mmxx2 1912 MB/s
[ 72.784024] raid6: sse1x1 958 MB/s
[ 72.852011] raid6: sse1x2 1724 MB/s
[ 72.920021] raid6: sse2x1 1956 MB/s
[ 72.988009] raid6: sse2x2 2871 MB/s
[ 72.988012] raid6: using algorithm sse2x2 (2871 MB/s)
[ 72.992734] md: raid6 personality registered for level 6
[ 72.992739] md: raid5 personality registered for level 5
[ 72.992742] md: raid4 personality registered for level 4
[ 73.003507] md: raid10 personality registered for level 10
[ 73.305977] PM: Starting manual resume from disk
[ 73.305983] PM: Resume from partition 8:5
[ 73.305986] PM: Checking hibernation image.
[ 73.306197] PM: Resume from disk failed.
[ 73.333139] EXT4-fs (sda1): barriers enabled
[ 73.343130] kjournald2 starting: pid 419, dev sda1:8, commit interval 5 seconds
[ 73.343209] EXT4-fs (sda1): delayed allocation enabled
[ 73.343215] EXT4-fs: file extents enabled
[ 73.346542] EXT4-fs: mballoc enabled
[ 73.346566] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 79.013742] Adding 1951856k swap on /dev/sda5. Priority:-1 extents:1 across:1951856k
[ 79.027236] udev: starting version 147
[ 79.138769] lp: driver loaded but no devices found
[ 79.188867] intel_rng: FWH not detected
[ 79.256106] nvidia: module license 'NVIDIA' taints kernel.
[ 79.256113] Disabling lock debugging due to kernel taint
[ 79.304094] parport_pc 00:08: reported by Plug and Play ACPI
[ 79.304145] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 79.582354] EXT4-fs (sda1): internal journal on sda1:8
[ 79.594396] ppdev: user-space parallel port driver
[ 79.604410] lp0: using parport0 (interrupt-driven).
[ 79.626443] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 79.641516] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 79.641526] nvidia 0000:01:00.0: setting latency timer to 64
[ 79.642509] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.20 Thu Jun 25 19:23:24 PDT 2009
[ 79.703591] alloc irq_desc for 17 on node -1
[ 79.703596] alloc kstat_irqs on node -1
[ 79.703607] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 79.703642] Intel ICH 0000:00:1e.2: setting latency timer to 64
[ 79.806594] EXT4-fs (sda6): barriers enabled
[ 79.806934] kjournald2 starting: pid 806, dev sda6:8, commit interval 5 seconds
[ 79.807208] EXT4-fs (sda6): internal journal on sda6:8
[ 79.807215] EXT4-fs (sda6): delayed allocation enabled
[ 79.807220] EXT4-fs: file extents enabled
[ 79.830000] EXT4-fs: mballoc enabled
[ 79.830027] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 80.024021] intel8x0_measure_ac97_clock: measured 54107 usecs (2607 samples)
[ 80.024026] intel8x0: clocking to 48000
[ 80.337984] r8169: eth0: link up
[ 80.487985] type=1505 audit(1265403627.962:2): operation="profile_load" pid=1051 name=/usr/share/gdm/guest-session/Xsession
[ 80.492958] type=1505 audit(1265403627.970:3): operation="profile_load" pid=1062 name=/sbin/dhclient3
[ 80.493792] type=1505 audit(1265403627.970:4): operation="profile_load" pid=1062 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 80.494251] type=1505 audit(1265403627.970:5): operation="profile_load" pid=1062 name=/usr/lib/connman/scripts/dhclient-script
[ 80.500351] type=1505 audit(1265403627.974:6): operation="profile_load" pid=1067 name=/usr/bin/evince
[ 80.515318] type=1505 audit(1265403627.990:7): operation="profile_load" pid=1067 name=/usr/bin/evince-previewer
[ 80.526385] type=1505 audit(1265403628.002: : operation="profile_load" pid=1067 name=/usr/bin/evince-thumbnailer
[ 80.538857] type=1505 audit(1265403628.014:9): operation="profile_load" pid=1077 name=/usr/lib/cups/backend/cups-pdf
[ 80.539828] type=1505 audit(1265403628.014:10): operation="profile_load" pid=1077 name=/usr/sbin/cupsd
[ 80.551652] type=1505 audit(1265403628.026:11): operation="profile_load" pid=1086 name=/usr/sbin/tcpdump
[ 83.285367] CPU0 attaching NULL sched-domain.
[ 83.285376] CPU1 attaching NULL sched-domain.
[ 83.300114] CPU0 attaching sched-domain:
[ 83.300120] domain 0: span 0-1 level MC
[ 83.300125] groups: 0 1
[ 83.300132] domain 1: span 0-1 level CPU
[ 83.300136] groups: 0-1 (__cpu_power = 2048)
[ 83.300145] CPU1 attaching sched-domain:
[ 83.300148] domain 0: span 0-1 level MC
[ 83.300152] groups: 1 0
[ 83.300158] domain 1: span 0-1 level CPU
[ 83.300162] groups: 0-1 (__cpu_power = 2048)
[ 85.218241] CPU0 attaching NULL sched-domain.
[ 85.218250] CPU1 attaching NULL sched-domain.
[ 85.232115] CPU0 attaching sched-domain:
[ 85.232122] domain 0: span 0-1 level CPU
[ 85.232127] groups: 0 1
[ 85.232136] CPU1 attaching sched-domain:
[ 85.232140] domain 0: span 0-1 level CPU
[ 85.232144] groups: 1 0
[ 91.072011] eth0: no IPv6 routers present
[ 118.996813] padlock: VIA PadLock not detected.
selline inf tulis siis
|
|
|
|
|
|
|
|
bobc
Pingviini aktivist
Vanus: 43
Liitunud: 09.07.2005
Postitused: 165
Asukoht: undef
Distributsioon: SouRCe64 GNU/Linux
|
|
ei paista kuskil su USB ketast.
Võta järelt ära.
modprobe ehci_hcd
modprobe usb-storage
torka seade järgi ja oota miski 5-8 sec, ja dmesg uuesti, vaata kas võtab vidina järgi.
Mis USB ketas see on, tavaliselt nad peaksid käituma kui USB FLASH seadmed (mul endal miski ide/sata <> usb2 adabter).
|
|
|
|
_________________
|
|
|
|
parimmax
Pingviini aktivist
Vanus: 59
Liitunud: 21.03.2009
Postitused: 367
Distributsioon: estobuntu,ubuntu
|
|
tegemist on lacie välise kõvakettaga millelt üks tark kodanik driverid maha lasi kuna toide ütles ka üles siis soovitas spetsialist ühendada ketas arvuti sisse nagu kõvaketaski ühendatakse nii et ta ei ole usb kaudu ühendatud
eelmisel korral sai ühendatud nagu vanas teemas oli
|
|
|
|
|
|
|
|
bobc
Pingviini aktivist
Vanus: 43
Liitunud: 09.07.2005
Postitused: 165
Asukoht: undef
Distributsioon: SouRCe64 GNU/Linux
|
|
srry ei lugenud lingis olevat foorumit põhjalikult.
dmesgis paistab rida:
ata4: device not ready (errno=-16), forcing hardreset
Kas see HDD BIOS järgi ka tuleb ja näitab oma mahtu.
Sest 99% kindlusega kernel sul seda hetkel pole leidnud.
PS. Sellest su eelmisest teemast ma ka suurt targemaks ei saanud, et osata paremini aidata.
Emaplaat, hdd tüüp, kerneli version, dmesg
need nagu oleks elementaarseks infoks, võimalik, et su kerneli ver Vs plate omab miskit bugi, mis ei lase antud hdd korralikult tuvastada jne.
|
|
|
|
_________________
Viimati muutis bobc 06.02.2010, 01:28; muudetud 1 kord
|
|
|
|
erku
Vana Pingviin
Vanus: 55
Liitunud: 12.09.2008
Postitused: 559
Asukoht: Tallinn, Järvamaa
Distributsioon: Mint/Debian _32bit
|
|
Vabandan, ei saanud täpselt aru, aga:
Ütlesid et tegid 500 ketta tühjaks. Seega võib oletada et võisid kustutada sealt ära ka vaba ruumi, ehk kustutasid seal olnud partitsiooni. Kui nii, siis sa ei näegi teda, pole miskit näha ju seal.
Võtad partitsiooni editori lahti. Kui ketas on tõepoolest ühendatud ja ringi käib siis tuleb ta seal nähtavale ning saad ta meelepärasesse vormingusse ümber formaatida ja peale antud kettale uue partitsiooni loomist tuleb ka ketas muus süsteemis nähtavale.
|
|
|
|
|
|
|
|
parimmax
Pingviini aktivist
Vanus: 59
Liitunud: 21.03.2009
Postitused: 367
Distributsioon: estobuntu,ubuntu
|
|
| vot ei tule kuskilt välja järelikult sis on pees kuigi käega katsudes tundub et käib ringi jne
|
|
|
|
|
|
|
|
-IFFI-
Vana Pingviin
Vanus: 48
Liitunud: 25.06.2005
Postitused: 1411
Asukoht: Lappeenranta-Turku
Distributsioon: Linux MX
|
|
| parimmax kirjutas: | | livena saab seal kettal ubuntu küll jooksma kuid installimisel on ketta koht tühi st pole kuhugi ntsallida.oma arust midagi valesti ei teinud kuid jama on majas.oleks kelegi mõtteid mida teha? |
Live plaati jooksutades ei ole vaja mitte ühtegi ketast sul, ei välist ega sisest, see jookseb ju plaadilt ja rammus.
Aga oled asja piilunud näiteks Gparted liveCD-ga? Äkki laseb sellega kudagi moodu ligi. Ise küll ei usu aga nuh mis seal enam kaotada, proovida ju võib.
Kui ringi käib siis voolu sisse võtab ja midagi peab ju näitama. Pista teise arvuti see ketas või tõsta kaableid ringi.
|
|
|
|
|
|
|
  |
erku
Vana Pingviin
Vanus: 55
Liitunud: 12.09.2008
Postitused: 559
Asukoht: Tallinn, Järvamaa
Distributsioon: Mint/Debian _32bit
|
|
Olen ka seda meelt et proovida otse CD pealt Linuxit käivitades.
Aga kõik algab arvuti Bios`ist peale. Kui seal ketast ei näe, siis ei ole mõtetki OP süsteemist teda otsida.
Võibolla on biosis kettad käsitsi määratud (pole riistvara autom tuvastust aktiveeritud).
Võibolla on kaks kõvaketast mõlemad masteriks pügladega määratud kõvaketastel, või .. vaata juhtmed ja asendid üle.
Kui ketas käivitub ja ringi läheb on kindlasti vara öelda et ta õhtal on.
|
|
|
|
|
|
|
|
parimmax
Pingviini aktivist
Vanus: 59
Liitunud: 21.03.2009
Postitused: 367
Distributsioon: estobuntu,ubuntu
|
|
| bioses on auto peal esmane ketas on määratud ja 160 gb ühendus on korras ja plaat käivitub jne kuid installimisel ketast ei näita
|
|
|
|
|
|
|
|
erku
Vana Pingviin
Vanus: 55
Liitunud: 12.09.2008
Postitused: 559
Asukoht: Tallinn, Järvamaa
Distributsioon: Mint/Debian _32bit
|
|
Seega, kui Bios ketast näeb ja kettainfo on olemas, seega ketas toimib.
Jutt ei käinud installimisest. Paned näiteks LinuxMint CD sisse arvutisse ja käivitad CD pealt arvuti (olles eelnevalt määranud Bios boot menüüs esmaseks bootkettaks CD/DVD draivi).
Kui Linux on käima läinud, siis avad alt Menu ja kontrollpaneeli ja sealt Partition manager/ GParted manager; tuleb lahti põhiketas ja seal olevad partitsioonid nähtavale; nüüd peaksid saama ülevalt paremalt nurgast valida teise ketta, määrad olemasoleva partitsiooni kustutamisele, annad käsu täida (too roheline linnuke seal üleval) ja seejärel lood juba endale meelepärased uued partitsioonid ja kinnitad need(too roheline linnuke seal üleval). Kui asi õnnestus, siis nüüd Arvuti ikoonile klõpsata, peaks uus ketas või kettad (oleneb mitu partitsiooni tegid) näha olema. Kui pole teed arvutile restardi ja vaatad kas tekkis kettaid juurde.
..anna teada kas oli abi..
|
|
|
|
_________________
Mõttetera: Kui tarkvara ei meeldi või ei sobi, tuleb valida teine tarkvara.
|
|
|
|
-IFFI-
Vana Pingviin
Vanus: 48
Liitunud: 25.06.2005
Postitused: 1411
Asukoht: Lappeenranta-Turku
Distributsioon: Linux MX
|
|
Mitte midagi ei saa aru kui pole kirjavahe märke  aga sain vist aru nii, et ketaste määramine on automaatne, esmane ketas on 160GB...?
Kumba ketast sa tahad seal üldse näha :S? präegusest jutust võib järeldada, et probleem on sul 160GB kettaga aga teema alguses väidad 500GB :S
Nii kui minu arusaam on õige ja sa ikka üritad seda 500GB taga ajada siis võiksid proovida nii; võta see 160GB järelt ära (ühenda kaablid lahti) ja pista see 500GB sinna järgi, restardi arvuti ja vaata mida ta siis näitab, vaata ka BIOS-i. Kui ei mõika miskit proovi käsitsi BIOS-is ketas paika ajada.
Kui see 500GB on kaablite otsas ja Bios näitab sisi uuri live Gparted plaadiga teda või siis suvalise live cd-ga
|
|
|
|
|
|
|
|
parimmax
Pingviini aktivist
Vanus: 59
Liitunud: 21.03.2009
Postitused: 367
Distributsioon: estobuntu,ubuntu
|
|
| tundub et mingil seletamatul kombel on ketas siit ilmast lahkunud sest ei andnud (ei näidanud) ketast minti alt-ainult 160gb. igaljuhul koostööd see ei tee...kahju et tekitasin segadust,vabandan
|
|
|
|
|
|
|
|
-IFFI-
Vana Pingviin
Vanus: 48
Liitunud: 25.06.2005
Postitused: 1411
Asukoht: Lappeenranta-Turku
Distributsioon: Linux MX
|
|
Et kui voolujuhe on taga ei tundu ketas voolu sisse võtnuna(ei urise, surise vms.)??? Kui nii siis on ta meie seast lahkunud jah 
|
|
|
|
|
|
|
|
erku
Vana Pingviin
Vanus: 55
Liitunud: 12.09.2008
Postitused: 559
Asukoht: Tallinn, Järvamaa
Distributsioon: Mint/Debian _32bit
|
|
Aga jääks siis foorumlase -IFFI- sõnade juurde, kus korjaks selle 160-se ketta tagant ära ja asendaks samasse auku 500-se ketta ja vaataks kas Linux on võimeline temaga üldse opereerima.
Kui uus mudel Mint sul on; 7, 8 ? Kui on vanem mudel võib olla lihtsalt ühildumatus. Veel mint 7-l oli üldse suuri probleeme SATA draividega, eriti uuemate põlvkondade DVD draividega. Mint 8-l enam SATA probleeme reeglina pole.
Vaata veel kord Bios`i; kui 500 ketas on põhikettaks pandud, siis määra antud kettale "SATA mode = as IDE" ketta käitlemiseks.
Kui nüüd sellest viimati öeldust kah abi pole, siis hakkab ring tõepoolest täis saama.
|
|
|
|
_________________
Mõttetera: Kui tarkvara ei meeldi või ei sobi, tuleb valida teine tarkvara.
|
|
|
|
parimmax
Pingviini aktivist
Vanus: 59
Liitunud: 21.03.2009
Postitused: 367
Distributsioon: estobuntu,ubuntu
|
|
| mint 8-ga proovisin ei leia ketast ega näita ka biosst
|
|
|
|
|
|
|
|
|
|
|
