Portaal Portaal Pingviini veeb foorumi pealeht
  Viki  |  IRC  |  Otsing  |  Küsimused ja vastused  |  Profiil  |  Privaatsõnumite vaatamiseks logi sisse  | Logi sisse või Registreeru
<empty>
Vaata järgmist teemat
Vaata eelmist teemat

Postita uus teemaVasta teemale
Autor Sõnum
Andres
Pingviini aktivist
Pingviini aktivist


Vanus: 29
Liitunud: 03.09.2008
Postitused: 181

Distributsioon: Ubuntu 10.04
estonia.gif
postituspostitatud: 09.10.2009, 14:37  postituse pealkiri:  ML N750 suspend-resume [dmesg lisatud]  

üles ärgates siis vuristab erroreid nii kiiresti, et ei näe lugeda. Midagi sellist

ata1: irq_stat 0x00000040, connection status changed
ata1: SError: { DevExch }

Nvidia driverid peal, s2ram tuleb ples aga ka kõvaketas ei tööta enam. Distro estobuntu 9.05, proovisin kerneleid .28 .29 .30.

EDIT: lisasin kaks dmesg väljundit, mõlemad tehtud vahetult peale reseti ja uuesti käivitamist, kui arvuti on peale suspendi hangunud. distrost on saanud karmic vahepeal. Esimese dmesg on lastud konsoolist "sudo pm-suspend" ja teisel vajutatud lanceloti menüüst suspend nuppu.

Tsitaat:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-14-generic (buildd@samarium) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48+ureadahead2-Ubuntu SMP Wed Oct 28 15:34:04 UTC 2009 (Ubuntu 2.6.31-14.48+ureadahead2-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000be9b6000 (usable)
[ 0.000000] BIOS-e820: 00000000be9b6000 - 00000000be9b9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000be9b9000 - 00000000bfca5000 (usable)
[ 0.000000] BIOS-e820: 00000000bfca5000 - 00000000bfcbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfcbf000 - 00000000bfd85000 (usable)
[ 0.000000] BIOS-e820: 00000000bfd85000 - 00000000bfdbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfdbf000 - 00000000bfdec000 (usable)
[ 0.000000] BIOS-e820: 00000000bfdec000 - 00000000bfdff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xbfe00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-C7FFF uncachable
[ 0.000000] C8000-EFFFF write-protect
[ 0.000000] F0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BFE00000 mask FFFE00000 uncachable
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 base 0FFFE0000 mask FFFFE0000 write-protect
[ 0.000000] 7 base 0FFFD8000 mask FFFFF8000 write-protect
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009e000 (usable)
[ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000be9b6000 (usable)
[ 0.000000] modified: 00000000be9b6000 - 00000000be9b9000 (ACPI NVS)
[ 0.000000] modified: 00000000be9b9000 - 00000000bfca5000 (usable)
[ 0.000000] modified: 00000000bfca5000 - 00000000bfcbf000 (reserved)
[ 0.000000] modified: 00000000bfcbf000 - 00000000bfd85000 (usable)
[ 0.000000] modified: 00000000bfd85000 - 00000000bfdbf000 (ACPI NVS)
[ 0.000000] modified: 00000000bfdbf000 - 00000000bfdec000 (usable)
[ 0.000000] modified: 00000000bfdec000 - 00000000bfdff000 (ACPI data)
[ 0.000000] modified: 00000000bfdff000 - 00000000bfe00000 (usable)
[ 0.000000] modified: 00000000bfe00000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 378a5000 - 37fef28f
[ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff728f
[ 0.000000] Move RAMDISK from 00000000378a5000 - 0000000037fef28e to 008ad000 - 00ff728e
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 mlarvu)
[ 0.000000] ACPI: XSDT bfdfe120 00064 (v01 mlarvu mlatable 00000001 01000013)
[ 0.000000] ACPI: FACP bfdfd000 000F4 (v04 mlarvu mlatable 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT bfdef000 09EB8 (v01 mlarvu mlatable 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS bfd92000 00040
[ 0.000000] ACPI: HPET bfdfc000 00038 (v01 mlarvu mlatable 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC bfdfb000 0006C (v01 mlarvu mlatable 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG bfdfa000 0003C (v01 mlarvu mlatable 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASF! bfdf9000 000A5 (v32 mlarvu mlatable 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC bfdee000 00176 (v01 mlarvu mlatable 06040000 MSFT 01000013)
[ 0.000000] ACPI: BOOT bfded000 00028 (v01 mlarvu mlatable 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT bfdec000 00655 (v01 mlarvu mlatable 00003000 INTL 20060317)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2182MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac228] BRK ==> [00008a9000 - 00008ac228]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008ad000 - 0000ff728f] NEW RAMDISK ==> [00008ad000 - 0000ff728f]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bfe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000be9b6
[ 0.000000] 0: 0x000be9b9 -> 0x000bfca5
[ 0.000000] 0: 0x000bfcbf -> 0x000bfd85
[ 0.000000] 0: 0x000bfdbf -> 0x000bfdec
[ 0.000000] 0: 0x000bfdff -> 0x000bfe00
[ 0.000000] On node 0 totalpages: 785712
[ 0.000000] free_area_init_node: node 0, pgdat c0784980, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3962 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4365 pages used for memmap
[ 0.000000] HighMem zone: 554123 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c2810000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779571
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=7539a3a0-0b44-40e2-a455-0e4b4a5ba519 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 15718400 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bfe00)
[ 0.000000] Memory: 3085564k/3143680k available (4567k kernel code, 56368k reserved, 2141k data, 540k init, 2233952k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575ef4 - 0xc078d488 (2141 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575ef4 (4567 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.976 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.95 BogoMIPS (lpj=7979904)
[ 0.004000] Security Framework initialized
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU0: Thermal monitoring enabled (TM2)
[ 0.004000] using mwait in idle threads.
[ 0.004000] Performance Counters: Core2 events, Intel PMU driver.
[ 0.004000] ... version: 2
[ 0.004000] ... bit width: 40
[ 0.004000] ... generic counters: 2
[ 0.004000] ... value mask: 000000ffffffffff
[ 0.004000] ... max period: 000000007fffffff
[ 0.004000] ... fixed-purpose counters: 3
[ 0.004000] ... counter mask: 0000000700000003
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.018686] ACPI: Core revision 20090521
[ 0.036407] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.077715] CPU0: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz stepping 0a
[ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3989.95 BogoMIPS (lpj=7979912)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.165506] CPU1: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz stepping 0a
[ 0.165521] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168020] Brought up 2 CPUs
[ 0.168022] Total of 2 processors activated (7979.90 BogoMIPS).
[ 0.168073] CPU0 attaching sched-domain:
[ 0.168076] domain 0: span 0-1 level MC
[ 0.168078] groups: 0 1
[ 0.168083] CPU1 attaching sched-domain:
[ 0.168085] domain 0: span 0-1 level MC
[ 0.168087] groups: 1 0
[ 0.168159] Booting paravirtualized kernel on bare hardware
[ 0.168202] regulator: core version 0.5
[ 0.168202] Time: 23:20:26 Date: 11/14/09
[ 0.168202] NET: Registered protocol family 16
[ 0.168205] EISA bus registered
[ 0.168215] ACPI: bus type pci registered
[ 0.168280] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.168283] PCI: MCFG area at f8000000 reserved in E820
[ 0.168285] PCI: Using MMCONFIG for extended config space
[ 0.168287] PCI: Using configuration type 1 for base access
[ 0.169260] bio: create slab <bio-0> at 0
[ 0.172764] ACPI: EC: Look up EC in DSDT
[ 0.176341] ACPI: BIOS _OSI(Linux) query ignored
[ 0.176020] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.192171] ACPI: Interpreter enabled
[ 0.192177] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.192209] ACPI: Using IOAPIC for interrupt routing
[ 0.200836] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.200839] ACPI: EC: driver started in interrupt mode
[ 0.204350] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.204768] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.204880] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.204884] pci 0000:00:01.0: PME# disabled
[ 0.204990] pci 0000:00:1a.0: reg 20 io port: [0x60e0-0x60ff]
[ 0.205089] pci 0000:00:1a.1: reg 20 io port: [0x60c0-0x60df]
[ 0.205192] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd9205c00-0xd9205fff]
[ 0.205265] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.205271] pci 0000:00:1a.7: PME# disabled
[ 0.205331] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd9200000-0xd9203fff]
[ 0.205395] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.205400] pci 0000:00:1b.0: PME# disabled
[ 0.205492] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.205497] pci 0000:00:1c.0: PME# disabled
[ 0.205590] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.205595] pci 0000:00:1c.1: PME# disabled
[ 0.205694] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.205699] pci 0000:00:1c.5: PME# disabled
[ 0.205779] pci 0000:00:1d.0: reg 20 io port: [0x60a0-0x60bf]
[ 0.205878] pci 0000:00:1d.1: reg 20 io port: [0x6080-0x609f]
[ 0.205978] pci 0000:00:1d.2: reg 20 io port: [0x6060-0x607f]
[ 0.206078] pci 0000:00:1d.3: reg 20 io port: [0x6040-0x605f]
[ 0.206178] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd9205800-0xd9205bff]
[ 0.206251] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.206257] pci 0000:00:1d.7: PME# disabled
[ 0.206527] pci 0000:00:1f.2: reg 10 io port: [0x6108-0x610f]
[ 0.206535] pci 0000:00:1f.2: reg 14 io port: [0x6114-0x6117]
[ 0.206543] pci 0000:00:1f.2: reg 18 io port: [0x6100-0x6107]
[ 0.206552] pci 0000:00:1f.2: reg 1c io port: [0x6110-0x6113]
[ 0.206560] pci 0000:00:1f.2: reg 20 io port: [0x6020-0x603f]
[ 0.206568] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd9205000-0xd92057ff]
[ 0.206619] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.206623] pci 0000:00:1f.2: PME# disabled
[ 0.206666] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd9206000-0xd92060ff]
[ 0.206687] pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f]
[ 0.206764] pci 0000:00:1f.6: reg 10 64bit mmio: [0xd9204000-0xd9204fff]
[ 0.206898] pci 0000:01:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff]
[ 0.206917] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.206936] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff]
[ 0.206950] pci 0000:01:00.0: reg 24 io port: [0x5000-0x507f]
[ 0.206964] pci 0000:01:00.0: reg 30 32bit mmio: [0xfff80000-0xffffffff]
[ 0.207081] pci 0000:00:01.0: bridge io port: [0x5000-0x5fff]
[ 0.207084] pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd2ffffff]
[ 0.207090] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.207183] pci 0000:02:00.0: reg 10 64bit mmio: [0xd8100000-0xd8101fff]
[ 0.207304] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.207312] pci 0000:02:00.0: PME# disabled
[ 0.207399] pci 0000:00:1c.0: bridge io port: [0x4000-0x4fff]
[ 0.207404] pci 0000:00:1c.0: bridge 32bit mmio: [0xd8100000-0xd91fffff]
[ 0.207413] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd3000000-0xd3ffffff]
[ 0.207476] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[ 0.207482] pci 0000:00:1c.1: bridge 32bit mmio: [0xd7100000-0xd80fffff]
[ 0.207490] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd4000000-0xd4ffffff]
[ 0.207652] pci 0000:05:00.0: reg 10 io port: [0x1000-0x10ff]
[ 0.207731] pci 0000:05:00.0: reg 18 64bit mmio: [0xd5010000-0xd5010fff]
[ 0.207784] pci 0000:05:00.0: reg 20 64bit mmio: [0xd5000000-0xd500ffff]
[ 0.207812] pci 0000:05:00.0: reg 30 32bit mmio: [0xffff0000-0xffffffff]
[ 0.208149] pci 0000:05:00.0: supports D1 D2
[ 0.208151] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.208166] pci 0000:05:00.0: PME# disabled
[ 0.208322] pci 0000:00:1c.5: bridge io port: [0x1000-0x2fff]
[ 0.208327] pci 0000:00:1c.5: bridge 32bit mmio: [0xd6100000-0xd70fffff]
[ 0.208336] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xd5000000-0xd60fffff]
[ 0.208407] pci 0000:00:1e.0: transparent bridge
[ 0.208450] pci_bus 0000:00: on NUMA node 0
[ 0.208458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.208718] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.208804] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.208945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.209035] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.209150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
[ 0.217196] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.217334] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.217469] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.217604] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.217738] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.217872] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.218006] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.218141] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.218331] SCSI subsystem initialized
[ 0.218340] libata version 3.00 loaded.
[ 0.218340] usbcore: registered new interface driver usbfs
[ 0.218340] usbcore: registered new interface driver hub
[ 0.220011] usbcore: registered new device driver usb
[ 0.220043] ACPI: WMI: Mapper loaded
[ 0.220044] PCI: Using ACPI for IRQ routing
[ 0.228007] Bluetooth: Core ver 2.15
[ 0.228012] NET: Registered protocol family 31
[ 0.228013] Bluetooth: HCI device and connection manager initialized
[ 0.228016] Bluetooth: HCI socket layer initialized
[ 0.228018] NetLabel: Initializing
[ 0.228019] NetLabel: domain hash size = 128
[ 0.228021] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.228033] NetLabel: unlabeled traffic allowed by default
[ 0.228064] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.228070] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.245545] pnp: PnP ACPI init
[ 0.245555] ACPI: bus type pnp registered
[ 0.247486] pnp 00:02: io resource (0x164e-0x164f) overlaps 0000:00:1c.5 BAR 13 (0x1000-0x2fff), disabling
[ 0.249958] pnp: PnP ACPI: found 10 devices
[ 0.249960] ACPI: ACPI bus type pnp unregistered
[ 0.249963] PnPBIOS: Disabled by ACPI PNP
[ 0.249973] system 00:00: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.249980] system 00:02: ioport range 0x600-0x60f has been reserved
[ 0.249983] system 00:02: ioport range 0x610-0x610 has been reserved
[ 0.249986] system 00:02: ioport range 0x800-0x80f has been reserved
[ 0.249989] system 00:02: ioport range 0x810-0x817 has been reserved
[ 0.249991] system 00:02: ioport range 0x820-0x823 has been reserved
[ 0.249994] system 00:02: ioport range 0x400-0x47f has been reserved
[ 0.249997] system 00:02: ioport range 0x500-0x53f has been reserved
[ 0.250000] system 00:02: ioport range 0x540-0x57f has been reserved
[ 0.250002] system 00:02: ioport range 0x380-0x383 has been reserved
[ 0.250006] system 00:02: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.250009] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.250011] system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
[ 0.250014] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.250017] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.250020] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.250023] system 00:02: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.250026] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.284682] AppArmor: AppArmor Filesystem Enabled
[ 0.284698] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfff80000-0xffffffff]
[ 0.284703] pci 0000:05:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff]
[ 0.284752] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
[ 0.284754] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.284757] pci 0000:00:01.0: IO window: 0x5000-0x5fff
[ 0.284762] pci 0000:00:01.0: MEM window: 0xd0000000-0xd2ffffff
[ 0.284766] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.284771] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.284775] pci 0000:00:1c.0: IO window: 0x4000-0x4fff
[ 0.284781] pci 0000:00:1c.0: MEM window: 0xd8100000-0xd91fffff
[ 0.284787] pci 0000:00:1c.0: PREFETCH window: 0x000000d3000000-0x000000d3ffffff
[ 0.284795] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.284799] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.284805] pci 0000:00:1c.1: MEM window: 0xd7100000-0xd80fffff
[ 0.284811] pci 0000:00:1c.1: PREFETCH window: 0x000000d4000000-0x000000d4ffffff
[ 0.284819] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:05
[ 0.284823] pci 0000:00:1c.5: IO window: 0x1000-0x2fff
[ 0.284830] pci 0000:00:1c.5: MEM window: 0xd6100000-0xd70fffff
[ 0.284835] pci 0000:00:1c.5: PREFETCH window: 0x000000d5000000-0x000000d60fffff
[ 0.284843] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.284845] pci 0000:00:1e.0: IO window: disabled
[ 0.284851] pci 0000:00:1e.0: MEM window: disabled
[ 0.284856] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.284866] alloc irq_desc for 16 on node -1
[ 0.284868] alloc kstat_irqs on node -1
[ 0.284873] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.284877] pci 0000:00:01.0: setting latency timer to 64
[ 0.284885] alloc irq_desc for 17 on node -1
[ 0.284887] alloc kstat_irqs on node -1
[ 0.284890] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.284896] pci 0000:00:1c.0: setting latency timer to 64
[ 0.284904] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[ 0.284908] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.284915] pci 0000:00:1c.1: setting latency timer to 64
[ 0.284923] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.284929] pci 0000:00:1c.5: setting latency timer to 64
[ 0.284937] pci 0000:00:1e.0: setting latency timer to 64
[ 0.284941] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.284944] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.284946] pci_bus 0000:01: resource 0 io: [0x5000-0x5fff]
[ 0.284949] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd2ffffff]
[ 0.284952] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.284954] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff]
[ 0.284957] pci_bus 0000:02: resource 1 mem: [0xd8100000-0xd91fffff]
[ 0.284959] pci_bus 0000:02: resource 2 pref mem [0xd3000000-0xd3ffffff]
[ 0.284962] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
[ 0.284965] pci_bus 0000:03: resource 1 mem: [0xd7100000-0xd80fffff]
[ 0.284967] pci_bus 0000:03: resource 2 pref mem [0xd4000000-0xd4ffffff]
[ 0.284970] pci_bus 0000:05: resource 0 io: [0x1000-0x2fff]
[ 0.284972] pci_bus 0000:05: resource 1 mem: [0xd6100000-0xd70fffff]
[ 0.284975] pci_bus 0000:05: resource 2 pref mem [0xd5000000-0xd60fffff]
[ 0.284977] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.284980] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
[ 0.285010] NET: Registered protocol family 2
[ 0.285100] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.285401] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.285836] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.286051] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.286054] TCP reno registered
[ 0.286124] NET: Registered protocol family 1
[ 0.286178] Trying to unpack rootfs image as initramfs...
[ 0.475918] Freeing initrd memory: 7464k freed
[ 0.479542] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 0.479546] Simple Boot Flag at 0x44 set to 0x1
[ 0.479719] cpufreq-nforce2: No nForce2 chipset.
[ 0.479746] Scanning for low memory corruption every 60 seconds
[ 0.479843] audit: initializing netlink socket (disabled)
[ 0.479859] type=2000 audit(1258240826.475:1): initialized
[ 0.488445] highmem bounce pool size: 64 pages
[ 0.488450] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.489917] VFS: Disk quotas dquot_6.5.2
[ 0.489974] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.490512] fuse init (API version 7.12)
[ 0.490590] msgmni has been set to 1679
[ 0.490791] alg: No test for stdrng (krng)
[ 0.490802] io scheduler noop registered
[ 0.490805] io scheduler anticipatory registered
[ 0.490807] io scheduler deadline registered
[ 0.490846] io scheduler cfq registered (default)
[ 0.491233] pci 0000:01:00.0: Boot video device
[ 0.491348] alloc irq_desc for 24 on node -1
[ 0.491350] alloc kstat_irqs on node -1
[ 0.491359] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.491366] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.491498] alloc irq_desc for 25 on node -1
[ 0.491499] alloc kstat_irqs on node -1
[ 0.491508] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.491520] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.491676] alloc irq_desc for 26 on node -1
[ 0.491678] alloc kstat_irqs on node -1
[ 0.491687] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.491698] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.491852] alloc irq_desc for 27 on node -1
[ 0.491854] alloc kstat_irqs on node -1
[ 0.491863] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.491874] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.491980] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.492001] Firmware did not grant requested _OSC control
[ 0.492030] Firmware did not grant requested _OSC control
[ 0.492052] Firmware did not grant requested _OSC control
[ 0.492074] Firmware did not grant requested _OSC control
[ 0.492111] Firmware did not grant requested _OSC control
[ 0.492134] Firmware did not grant requested _OSC control
[ 0.492156] Firmware did not grant requested _OSC control
[ 0.492177] Firmware did not grant requested _OSC control
[ 0.492199] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.493502] ACPI: AC Adapter [ACAD] (off-line)
[ 0.493572] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.493576] ACPI: Power Button [PWRF]
[ 0.493625] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.493628] ACPI: Power Button [PWRB]
[ 0.493671] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.495449] ACPI: Lid Switch [LID0]
[ 0.495493] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 0.495496] ACPI: Sleep Button [SLPB]
[ 0.496368] ACPI: SSDT bfcb4c98 00223 (v01 mlarvu mlatable 00003000 INTL 20060317)
[ 0.497012] ACPI: SSDT bfcb2698 0061D (v01 mlarvu mlatable 00003001 INTL 20060317)
[ 0.497539] Monitor-Mwait will be used to enter C-1 state
[ 0.497563] Monitor-Mwait will be used to enter C-2 state
[ 0.497586] Monitor-Mwait will be used to enter C-3 state
[ 0.497593] Marking TSC unstable due to TSC halts in idle
[ 0.497623] Switched to high resolution mode on CPU 0
[ 0.497634] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.497658] processor LNXCPU:00: registered as cooling_device0
[ 0.497661] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.498153] ACPI: SSDT bfcb3e18 001CF (v01 mlarvu mlatable 00003000 INTL 20060317)
[ 0.498658] ACPI: SSDT bfcb4f18 0008D (v01 mlarvu mlatable 00003000 INTL 20060317)
[ 0.499332] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.499350] processor LNXCPU:01: registered as cooling_device1
[ 0.499354] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.501543] Switched to high resolution mode on CPU 1
[ 0.523011] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.523019] ACPI: Thermal Zone [TZ01] (68 C)
[ 0.523074] isapnp: Scanning for PnP cards...
[ 0.664482] ACPI: Battery Slot [BAT0] (battery present)
[ 0.879047] isapnp: No Plug & Play device found
[ 0.880191] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.881484] brd: module loaded
[ 0.881924] loop: module loaded
[ 0.881987] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.882055] ahci 0000:00:1f.2: version 3.0
[ 0.882068] alloc irq_desc for 19 on node -1
[ 0.882069] alloc kstat_irqs on node -1
[ 0.882076] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.882107] alloc irq_desc for 28 on node -1
[ 0.882109] alloc kstat_irqs on node -1
[ 0.882118] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 0.882205] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.882209] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ems
[ 0.882214] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.904071] scsi0 : ahci
[ 0.904156] scsi1 : ahci
[ 0.904212] scsi2 : ahci
[ 0.904266] scsi3 : ahci
[ 0.904322] scsi4 : ahci
[ 0.904376] scsi5 : ahci
[ 0.904532] ata1: SATA max UDMA/133 abar m2048@0xd9205000 port 0xd9205100 irq 28
[ 0.904536] ata2: SATA max UDMA/133 abar m2048@0xd9205000 port 0xd9205180 irq 28
[ 0.904538] ata3: DUMMY
[ 0.904539] ata4: DUMMY
[ 0.904542] ata5: SATA max UDMA/133 abar m2048@0xd9205000 port 0xd9205300 irq 28
[ 0.904546] ata6: SATA max UDMA/133 abar m2048@0xd9205000 port 0xd9205380 irq 28
[ 0.905432] Fixed MDIO Bus: probed
[ 0.905464] PPP generic driver version 2.4.2
[ 0.905549] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.905567] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.905578] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.905582] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.905625] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.909540] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.909547] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.909561] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd9205c00
[ 0.924513] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.924589] usb usb1: configuration #1 chosen from 1 choice
[ 0.924617] hub 1-0:1.0: USB hub found
[ 0.924624] hub 1-0:1.0: 4 ports detected
[ 0.924678] alloc irq_desc for 20 on node -1
[ 0.924680] alloc kstat_irqs on node -1
[ 0.924686] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.924695] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.924699] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.924727] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.928645] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.928652] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.928665] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd9205800
[ 0.944017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.944074] usb usb2: configuration #1 chosen from 1 choice
[ 0.944099] hub 2-0:1.0: USB hub found
[ 0.944106] hub 2-0:1.0: 8 ports detected
[ 0.944172] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.944187] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.944206] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.944212] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.944216] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.944245] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.944280] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060e0
[ 0.944353] usb usb3: configuration #1 chosen from 1 choice
[ 0.944377] hub 3-0:1.0: USB hub found
[ 0.944384] hub 3-0:1.0: 2 ports detected
[ 0.944430] alloc irq_desc for 21 on node -1
[ 0.944432] alloc kstat_irqs on node -1
[ 0.944436] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.944442] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.944446] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.944477] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.944521] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000060c0
[ 0.944598] usb usb4: configuration #1 chosen from 1 choice
[ 0.944622] hub 4-0:1.0: USB hub found
[ 0.944628] hub 4-0:1.0: 2 ports detected
[ 0.944678] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.944684] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.944688] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.944715] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.944742] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000060a0
[ 0.944819] usb usb5: configuration #1 chosen from 1 choice
[ 0.944844] hub 5-0:1.0: USB hub found
[ 0.944849] hub 5-0:1.0: 2 ports detected
[ 0.944897] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.944905] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.944908] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.944935] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.944961] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006080
[ 0.945038] usb usb6: configuration #1 chosen from 1 choice
[ 0.945065] hub 6-0:1.0: USB hub found
[ 0.945071] hub 6-0:1.0: 2 ports detected
[ 0.945117] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.945123] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.945127] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.945154] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.945181] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00006060
[ 0.945253] usb usb7: configuration #1 chosen from 1 choice
[ 0.945280] hub 7-0:1.0: USB hub found
[ 0.945286] hub 7-0:1.0: 2 ports detected
[ 0.945330] alloc irq_desc for 18 on node -1
[ 0.945332] alloc kstat_irqs on node -1
[ 0.945336] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.945342] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.945346] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.945376] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.945410] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00006040
[ 0.945489] usb usb8: configuration #1 chosen from 1 choice
[ 0.945514] hub 8-0:1.0: USB hub found
[ 0.945520] hub 8-0:1.0: 2 ports detected
[ 0.945612] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 0.965430] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.965436] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.965494] mice: PS/2 mouse device common for all mice
[ 0.965612] rtc_cmos 00:04: RTC can wake from S4
[ 0.965642] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.965673] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.965769] device-mapper: uevent: version 1.0.3
[ 0.966859] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.966949] device-mapper: multipath: version 1.1.0 loaded
[ 0.966952] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.967062] EISA: Probing bus 0 at eisa.0
[ 0.967068] Cannot allocate resource for EISA slot 1
[ 0.967070] Cannot allocate resource for EISA slot 2
[ 0.967072] Cannot allocate resource for EISA slot 3
[ 0.967074] Cannot allocate resource for EISA slot 4
[ 0.967076] Cannot allocate resource for EISA slot 5
[ 0.967078] Cannot allocate resource for EISA slot 6
[ 0.967088] EISA: Detected 0 cards.
[ 0.967262] cpuidle: using governor ladder
[ 0.967378] cpuidle: using governor menu
[ 0.967849] TCP cubic registered
[ 0.967997] NET: Registered protocol family 10
[ 0.968455] lo: Disabled Privacy Extensions
[ 0.968782] NET: Registered protocol family 17
[ 0.968799] Bluetooth: L2CAP ver 2.13
[ 0.968800] Bluetooth: L2CAP socket layer initialized
[ 0.968803] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.968805] Bluetooth: SCO socket layer initialized
[ 0.968841] Bluetooth: RFCOMM TTY layer initialized
[ 0.968844] Bluetooth: RFCOMM socket layer initialized
[ 0.968846] Bluetooth: RFCOMM ver 1.11
[ 0.969323] Using IPI No-Shortcut mode
[ 0.969378] PM: Resume from disk failed.
[ 0.969389] registered taskstats version 1
[ 0.969512] Magic number: 1:794:352
[ 0.969597] rtc_cmos 00:04: setting system clock to 2009-11-14 23:20:27 UTC (1258240827)
[ 0.969600] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.969601] EDD information not available.
[ 0.981842] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.232078] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.232092] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.236061] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.388067] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.388454] ata1.00: ATA-8: FUJITSU MHZ2320BH G2, 00000009, max UDMA/100
[ 1.388459] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.389023] ata1.00: configured for UDMA/100
[ 1.396547] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.398394] ata2.00: ATAPI: MATSHITADVD-RAM UJ870BJ, 1.01, max UDMA/33
[ 1.400530] ata2.00: configured for UDMA/33
[ 1.404220] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2320B 0000 PQ: 0 ANSI: 5
[ 1.404332] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.404368] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.404411] sd 0:0:0:0: [sda] Write Protect is off
[ 1.404413] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.404436] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.404551] sda:
[ 1.417950] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ870BJ 1.01 PQ: 0 ANSI: 5
[ 1.421592] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.421597] Uniform CD-ROM driver Revision: 3.20
[ 1.421719] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.421784] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.426274] sda1 sda2 < sda5 >
[ 1.456255] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.456283] Freeing unused kernel memory: 540k freed
[ 1.456605] Write protecting the kernel text: 4568k
[ 1.456658] Write protecting the kernel read-only data: 1840k
[ 1.500036] Clocksource tsc unstable (delta = -414452708 ns)
[ 1.563669] Linux agpgart interface v0.103
[ 1.593892] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.593928] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.594036] r8169 0000:05:00.0: setting latency timer to 64
[ 1.594192] alloc irq_desc for 29 on node -1
[ 1.594194] alloc kstat_irqs on node -1
[ 1.594227] r8169 0000:05:00.0: irq 29 for MSI/MSI-X
[ 1.594880] eth0: RTL8168c/8111c at 0xf8102000, 00:23:8b:1d:ce:3e, XID 3c2000c0 IRQ 29
[ 1.616465] usb 1-1: configuration #1 chosen from 1 choice
[ 1.639263] acpi device:0a: registered as cooling_device2
[ 1.639402] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/device:08/input/input6
[ 1.639443] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.651318] Initializing USB Mass Storage driver...
[ 1.653431] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.653638] usb-storage: device found at 2
[ 1.653640] usb-storage: waiting for device to settle before scanning
[ 1.653646] usbcore: registered new interface driver usb-storage
[ 1.653649] USB Mass Storage support registered.
[ 1.736072] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 1.889561] usb 1-4: configuration #1 chosen from 1 choice
[ 3.811105] PM: Starting manual resume from disk
[ 3.811109] PM: Resume from partition 8:5
[ 3.811111] PM: Checking hibernation image.
[ 3.811231] PM: Resume from disk failed.
[ 3.835628] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 3.835633] EXT4-fs (sda1): write access will be enabled during recovery
[ 3.879381] EXT4-fs (sda1): barriers enabled
[ 4.111683] kjournald2 starting: pid 405, dev sda1:8, commit interval 5 seconds
[ 4.111714] EXT4-fs (sda1): delayed allocation enabled
[ 4.111719] EXT4-fs: file extents enabled
[ 4.134963] EXT4-fs: mballoc enabled
[ 4.134977] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 4.134984] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 6472
[ 4.135011] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 6458
[ 4.135020] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4706
[ 4.135029] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5017
[ 4.135038] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5010
[ 4.135046] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4708
[ 4.135054] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4707
[ 4.135062] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 6455
[ 4.135070] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4705
[ 4.135078] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4692
[ 4.135087] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4691
[ 4.135094] EXT4-fs (sda1): 11 orphan inodes deleted
[ 4.135097] EXT4-fs (sda1): recovery complete
[ 4.496238] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 5.155937] type=1505 audit(1258240831.683:2): operation="profile_load" pid=428 name=/sbin/dhclient3
[ 5.156724] type=1505 audit(1258240831.686:3): operation="profile_load" pid=428 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 5.157115] type=1505 audit(1258240831.686:4): operation="profile_load" pid=428 name=/usr/lib/connman/scripts/dhclient-script
[ 5.191081] type=1505 audit(1258240831.718:5): operation="profile_load" pid=430 name=/usr/lib/cups/backend/cups-pdf
[ 5.191923] type=1505 audit(1258240831.718:6): operation="profile_load" pid=430 name=/usr/sbin/cupsd
[ 5.204530] type=1505 audit(1258240831.734:7): operation="profile_load" pid=431 name=/usr/sbin/mysqld-akonadi
[ 5.207882] type=1505 audit(1258240831.734:Cool: operation="profile_load" pid=432 name=/usr/sbin/tcpdump
[ 6.652427] usb-storage: device scan complete
[ 6.654436] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 6.654931] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 6.658778] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 11.336288] udev: starting version 147
[ 11.347391] Adding 9068652k swap on /dev/sda5. Priority:-1 extents:1 across:9068652k
[ 11.364092] lp: driver loaded but no devices found
[ 11.503851] EXT4-fs (sda1): internal journal on sda1:8
[ 11.528533] nvidia: module license 'NVIDIA' taints kernel.
[ 11.528537] Disabling lock debugging due to kernel taint
[ 11.538835] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.787463] alloc irq_desc for 22 on node -1
[ 11.787466] alloc kstat_irqs on node -1
[ 11.787472] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 11.787507] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.798693] Linux video capture interface: v2.00
[ 11.801594] uvcvideo: Found UVC 1.00 device USB Webcam (0408:20ba)
[ 11.815826] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 11.815851] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.815866] nvidia 0000:01:00.0: setting latency timer to 64
[ 11.816055] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009
[ 11.819954] input: USB Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4:1.0/input/input7
[ 11.820019] usbcore: registered new interface driver uvcvideo
[ 11.820023] USB Video Class driver (v0.1.0)
[ 11.852486] cfg80211: Calling CRDA to update world regulatory domain
[ 11.856219] cfg80211: World regulatory domain updated:
[ 11.856222] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.856225] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.856228] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.856230] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.856233] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.856235] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.920371] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[ 11.920449] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 11.936381] r8169: eth0: link down
[ 11.936584] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.969116] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[ 11.969119] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 11.969190] iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.969199] iwlagn 0000:02:00.0: setting latency timer to 64
[ 11.969225] iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 12.008155] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 12.008223] alloc irq_desc for 30 on node -1
[ 12.008225] alloc kstat_irqs on node -1
[ 12.008246] iwlagn 0000:02:00.0: irq 30 for MSI/MSI-X
[ 12.035195] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 12.083382] type=1505 audit(1258240838.610:9): operation="profile_replace" pid=978 name=/sbin/dhclient3
[ 12.084168] type=1505 audit(1258240838.614:10): operation="profile_replace" pid=978 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 12.084563] type=1505 audit(1258240838.614:11): operation="profile_replace" pid=978 name=/usr/lib/connman/scripts/dhclient-script
[ 12.087293] type=1505 audit(1258240838.614:12): operation="profile_replace" pid=980 name=/usr/lib/cups/backend/cups-pdf
[ 12.088137] type=1505 audit(1258240838.618:13): operation="profile_replace" pid=980 name=/usr/sbin/cupsd
[ 12.091230] type=1505 audit(1258240838.618:14): operation="profile_replace" pid=981 name=/usr/sbin/mysqld-akonadi
[ 12.093009] type=1505 audit(1258240838.622:15): operation="profile_replace" pid=982 name=/usr/sbin/tcpdump
[ 12.746388] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000
[ 12.800717] ppdev: user-space parallel port driver
[ 12.819698] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 13.758055] CPU0 attaching NULL sched-domain.
[ 13.758060] CPU1 attaching NULL sched-domain.
[ 13.772119] CPU0 attaching sched-domain:
[ 13.772123] domain 0: span 0-1 level MC
[ 13.772128] groups: 0 1
[ 13.772135] domain 1: span 0-1 level CPU
[ 13.772139] groups: 0-1 (__cpu_power = 2048)
[ 13.772147] CPU1 attaching sched-domain:
[ 13.772150] domain 0: span 0-1 level MC
[ 13.772154] groups: 1 0
[ 13.772160] domain 1: span 0-1 level CPU
[ 13.772164] groups: 0-1 (__cpu_power = 2048)
[ 30.517424] CPU0 attaching NULL sched-domain.
[ 30.517432] CPU1 attaching NULL sched-domain.
[ 30.532705] CPU0 attaching sched-domain:
[ 30.532710] domain 0: span 0-1 level MC
[ 30.532714] groups: 0 1
[ 30.532721] domain 1: span 0-1 level CPU
[ 30.532725] groups: 0-1 (__cpu_power = 2048)
[ 30.532734] CPU1 attaching sched-domain:
[ 30.532737] domain 0: span 0-1 level MC
[ 30.532741] groups: 1 0
[ 30.532747] domain 1: span 0-1 level CPU
[ 30.532751] groups: 0-1 (__cpu_power = 2048)
[ 42.776099] CE: hpet increasing min_delta_ns to 15000 nsec
[ 103.272326] CPU0 attaching NULL sched-domain.
[ 103.272333] CPU1 attaching NULL sched-domain.
[ 103.288620] CPU0 attaching sched-domain:
[ 103.288627] domain 0: span 0-1 level MC
[ 103.288631] groups: 0 1
[ 103.288638] domain 1: span 0-1 level CPU
[ 103.288642] groups: 0-1 (__cpu_power = 2048)
[ 103.288651] CPU1 attaching sched-domain:
[ 103.288654] domain 0: span 0-1 level MC
[ 103.288658] groups: 1 0
[ 103.288664] domain 1: span 0-1 level CPU
[ 103.288668] groups: 0-1 (__cpu_power = 2048)
[ 109.996869] CE: hpet increasing min_delta_ns to 22500 nsec



Tsitaat:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-14-generic (buildd@samarium) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48+ureadahead2-Ubuntu SMP Wed Oct 28 15:34:04 UTC 2009 (Ubuntu 2.6.31-14.48+ureadahead2-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000be9b6000 (usable)
[ 0.000000] BIOS-e820: 00000000be9b6000 - 00000000be9b9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000be9b9000 - 00000000bfca5000 (usable)
[ 0.000000] BIOS-e820: 00000000bfca5000 - 00000000bfcbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfcbf000 - 00000000bfd85000 (usable)
[ 0.000000] BIOS-e820: 00000000bfd85000 - 00000000bfdbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfdbf000 - 00000000bfdec000 (usable)
[ 0.000000] BIOS-e820: 00000000bfdec000 - 00000000bfdff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xbfe00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-C7FFF uncachable
[ 0.000000] C8000-EFFFF write-protect
[ 0.000000] F0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BFE00000 mask FFFE00000 uncachable
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 base 0FFFE0000 mask FFFFE0000 write-protect
[ 0.000000] 7 base 0FFFD8000 mask FFFFF8000 write-protect
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009e000 (usable)
[ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000be9b6000 (usable)
[ 0.000000] modified: 00000000be9b6000 - 00000000be9b9000 (ACPI NVS)
[ 0.000000] modified: 00000000be9b9000 - 00000000bfca5000 (usable)
[ 0.000000] modified: 00000000bfca5000 - 00000000bfcbf000 (reserved)
[ 0.000000] modified: 00000000bfcbf000 - 00000000bfd85000 (usable)
[ 0.000000] modified: 00000000bfd85000 - 00000000bfdbf000 (ACPI NVS)
[ 0.000000] modified: 00000000bfdbf000 - 00000000bfdec000 (usable)
[ 0.000000] modified: 00000000bfdec000 - 00000000bfdff000 (ACPI data)
[ 0.000000] modified: 00000000bfdff000 - 00000000bfe00000 (usable)
[ 0.000000] modified: 00000000bfe00000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 378a5000 - 37fef28f
[ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff728f
[ 0.000000] Move RAMDISK from 00000000378a5000 - 0000000037fef28e to 008ad000 - 00ff728e
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 mlarvu)
[ 0.000000] ACPI: XSDT bfdfe120 00064 (v01 mlarvu mlatable 00000001 01000013)
[ 0.000000] ACPI: FACP bfdfd000 000F4 (v04 mlarvu mlatable 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT bfdef000 09EB8 (v01 mlarvu mlatable 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS bfd92000 00040
[ 0.000000] ACPI: HPET bfdfc000 00038 (v01 mlarvu mlatable 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC bfdfb000 0006C (v01 mlarvu mlatable 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG bfdfa000 0003C (v01 mlarvu mlatable 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASF! bfdf9000 000A5 (v32 mlarvu mlatable 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC bfdee000 00176 (v01 mlarvu mlatable 06040000 MSFT 01000013)
[ 0.000000] ACPI: BOOT bfded000 00028 (v01 mlarvu mlatable 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT bfdec000 00655 (v01 mlarvu mlatable 00003000 INTL 20060317)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2182MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac228] BRK ==> [00008a9000 - 00008ac228]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008ad000 - 0000ff728f] NEW RAMDISK ==> [00008ad000 - 0000ff728f]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bfe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000be9b6
[ 0.000000] 0: 0x000be9b9 -> 0x000bfca5
[ 0.000000] 0: 0x000bfcbf -> 0x000bfd85
[ 0.000000] 0: 0x000bfdbf -> 0x000bfdec
[ 0.000000] 0: 0x000bfdff -> 0x000bfe00
[ 0.000000] On node 0 totalpages: 785712
[ 0.000000] free_area_init_node: node 0, pgdat c0784980, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3962 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4365 pages used for memmap
[ 0.000000] HighMem zone: 554123 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c000000




Viimati muutis Andres 15.11.2009, 09:49; muudetud 1 kord
-ordi-
Vana Pingviin
Vana Pingviin


Vanus: 32
Liitunud: 13.12.2008
Postitused: 821

Distributsioon: GNU/Linux
estonia.gif
postituspostitatud: 09.10.2009, 14:42  postituse pealkiri:  (teema puudub)  

Käsust dmesg peaksid saama selle välja lugeda.

Võid proovida hetkel kõige uuemat kernelit

http://kernel.ubuntu.com/~kernel-ppa/mainline/v2.6.31.3/

Standby töötab mul ilusti olen proovinud draivereid 177.x.x, 180.x.x, 185.x.x, ja 190.36 on hetkel. Ja iga kerneliga tötab kenasti.


Andres
Pingviini aktivist
Pingviini aktivist


Vanus: 29
Liitunud: 03.09.2008
Postitused: 181

Distributsioon: Ubuntu 10.04
estonia.gif
postituspostitatud: 02.11.2009, 21:36  postituse pealkiri:  (teema puudub)  

Kui suur tõenäosus et karmic aitaks? Kas upgrade on ka sellel juhul sama hea kui fresh?


Andres
Pingviini aktivist
Pingviini aktivist


Vanus: 29
Liitunud: 03.09.2008
Postitused: 181

Distributsioon: Ubuntu 10.04
estonia.gif
postituspostitatud: 15.11.2009, 09:50  postituse pealkiri:  (teema puudub)  

Lisasin dmesg väljundid esimesse posti, oleks tore kui keegi viitsiks aidata, ise neist aru ei saa eriti.


Näita (aja järgi):      
Postita uus teemaVasta teemale


Vaata järgmist teemat
Vaata eelmist teemat
Powered by phpBB2 Plus based on phpBB © 2001/7 phpBB Group