Linux version 2.6.31-desktop586-2mnb (herton@n2.mandriva.com) (gcc version 4.4.1 (GCC) ) #1 SMP Mon Sep 14 15:03:52 EDT 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001bea0000 (usable)
 BIOS-e820: 000000001bea0000 - 000000001beb4000 (ACPI data)
 BIOS-e820: 000000001beb4000 - 000000001bf00000 (ACPI NVS)
 BIOS-e820: 000000001bf00000 - 000000001c000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x1bea0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FF0000000 write-back
  1 base 010000000 mask FF8000000 write-back
  2 base 018000000 mask FFC000000 write-back
  3 base 01BF00000 mask FFFF00000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
PAT not supported by CPU.
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-000000001bea0000
 0000000000 - 0000400000 page 4k
 0000400000 - 001bc00000 page 2M
 001bc00000 - 001bea0000 page 4k
kernel direct mapping tables up to 1bea0000 @ 7000-d000
RAMDISK: 1bb2a000 - 1be8f7d6
ACPI: RSDP 000f7550 00014 (v00 PTLTD )
ACPI: RSDT 1beaf147 00038 (v01 PTLTD    RSDT   06040000  LTP 00000000)
ACPI: FACP 1beb3ef6 00074 (v01 ATI    Goldfish 06040000 ATI  000F4240)
ACPI: DSDT 1beaf59c 0495A (v01 FIC    LM13W    06040000 MSFT 0100000E)
ACPI: FACS 1beb4fc0 00040
ACPI: APIC 1beb3f6a 0005A (v01 PTLTD      APIC   06040000  LTP 00000000)
ACPI: MCFG 1beb3fc4 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
ACPI: SSDT 1beaf381 0021B (v01  PmRef  Cpu0Cst 00003001 INTL 20030224)
ACPI: SSDT 1beaf17f 00202 (v01  PmRef    CpuPm 00003000 INTL 20030224)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
446MB LOWMEM available.
  mapped low ram: 0 - 1bea0000
  low ram: 0 - 1bea0000
  node 0 low ram: 00000000 - 1bea0000
  node 0 bootmap 00002000 - 000057d4
(9 early reservations) ==> bootmem [0000000000 - 001bea0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 000077ae84]    TEXT DATA BSS ==> [0000100000 - 000077ae84]
  #4 [001bb2a000 - 001be8f7d6]          RAMDISK ==> [001bb2a000 - 001be8f7d6]
  #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #6 [000077b000 - 000077e108]              BRK ==> [000077b000 - 000077e108]
  #7 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
  #8 [0000002000 - 0000006000]          BOOTMAP ==> [0000002000 - 0000006000]
found SMP MP-table at [c00f74c0] f74c0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x0001bea0
  HighMem  0x0001bea0 -> 0x0001bea0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0001bea0
On node 0 totalpages: 114239
free_area_init_node: node 0, pgdat c0641dc0, node_mem_map c1000000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 862 pages used for memmap
  Normal zone: 109378 pages, LIFO batch:31
Using APIC driver default
SB4X0 revision 0x11
Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 1c000000 (gap: 1c000000:e2c00000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages at c1382000, static data 35100 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113345
Kernel command line: BOOT_IMAGE=linux root=UUID=b0ad77cc-d21f-478c-a63b-b881c609daed  resume=UUID=89434926-9abe-4b6a-9fea-a7c773b12338 splash=silent vga=788
PID hash table entries: 2048 (order: 11, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 442584k/457344k available (3553k kernel code, 14212k reserved, 1879k data, 468k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffd54000 - 0xfffff000   (2732 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xdc6a0000 - 0xff3fe000   ( 557 MB)
    lowmem  : 0xc0000000 - 0xdbea0000   ( 446 MB)
      .init : 0xc064f000 - 0xc06c4000   ( 468 kB)
      .data : 0xc04787f2 - 0xc064e688   (1879 kB)
      .text : 0xc0100000 - 0xc04787f2   (3553 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:1280
Fast TSC calibration using PIT
Detected 1600.085 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.17 BogoMIPS (lpj=1600085)
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Performance Counters: p6 PMU driver.
... version:                 0
... bit width:               32
... generic counters:        2
... value mask:              00000000ffffffff
... max period:              000000007fffffff
... fixed-purpose counters:  0
... counter mask:            0000000000000003
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 20k freed
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20090521
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 14149 entries in 28 pages
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: Intel(R) Celeron(R) M processor         1.60GHz stepping 08
Brought up 1 CPUs
Total of 1 processors activated (3200.17 BogoMIPS).
CPU0 attaching NULL sched-domain.
devtmpfs: initialized
Booting paravirtualized kernel on bare hardware
Time: 17:59:21  Date: 09/28/09
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 7
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xfd8ad, last bus=8
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 7
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: Power Resource [PFN0] (off)
ACPI: Power Resource [PFN1] (off)
ACPI: ACPI Dock Station Driver: 2 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:13.0: reg 10 32bit mmio: [0xd0000000-0xd0000fff]
pci 0000:00:13.1: reg 10 32bit mmio: [0xd0001000-0xd0001fff]
pci 0000:00:13.2: reg 10 32bit mmio: [0xd0002000-0xd0002fff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: reg 10 io port: [0x8420-0x842f]
pci 0000:00:14.0: reg 14 32bit mmio: [0xd0003000-0xd00033ff]
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:14.1: reg 10 io port: [0x8450-0x8457]
pci 0000:00:14.1: reg 14 io port: [0x8444-0x8447]
pci 0000:00:14.1: reg 18 io port: [0x8448-0x844f]
pci 0000:00:14.1: reg 1c io port: [0x8440-0x8443]
pci 0000:00:14.1: reg 20 io port: [0x8430-0x843f]
pci 0000:00:14.5: reg 10 32bit mmio: [0xd0003400-0xd00034ff]
pci 0000:00:14.6: reg 10 32bit mmio: [0xd0003800-0xd00038ff]
pci 0000:01:05.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
pci 0000:01:05.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff]
pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff]
pci 0000:02:01.0: reg 10 32bit mmio: [0xd0200000-0xd020ffff]
pci 0000:02:0b.0: reg 10 32bit mmio: [0xd0218000-0xd0218fff]
pci 0000:02:0b.0: supports D1 D2
pci 0000:02:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:0b.0: PME# disabled
pci 0000:02:0b.2: reg 10 32bit mmio: [0xd0219000-0xd02197ff]
pci 0000:02:0b.2: reg 14 32bit mmio: [0xd0210000-0xd0213fff]
pci 0000:02:0b.2: supports D1 D2
pci 0000:02:0b.2: PME# supported from D0 D1 D2 D3hot
pci 0000:02:0b.2: PME# disabled
pci 0000:02:0b.3: reg 10 32bit mmio: [0xd0214000-0xd0215fff]
pci 0000:02:0b.3: supports D1 D2
pci 0000:02:0b.3: PME# supported from D0 D1 D2 D3hot
pci 0000:02:0b.3: PME# disabled
pci 0000:02:0b.4: reg 10 32bit mmio: [0xd021a000-0xd021a0ff]
pci 0000:02:0b.4: reg 14 32bit mmio: [0xd0219c00-0xd0219cff]
pci 0000:02:0b.4: reg 18 32bit mmio: [0xd0219800-0xd02198ff]
pci 0000:02:0b.4: supports D1 D2
pci 0000:02:0b.4: PME# supported from D0 D1 D2 D3hot
pci 0000:02:0b.4: PME# disabled
pci 0000:02:0d.0: reg 10 32bit mmio: [0xd0216000-0xd0217fff]
pci 0000:02:0d.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:02:0d.0: supports D1 D2
pci 0000:02:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:0d.0: PME# disabled
pci 0000:00:14.4: transparent bridge
pci 0000:00:14.4: bridge 32bit mmio: [0xd0200000-0xd02fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:02:0d.0 BAR 6 (0x0-0x1ffff), disabling
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:08: ioport range 0x1080-0x1080 has been reserved
system 00:08: ioport range 0x220-0x22f has been reserved
system 00:08: ioport range 0x40b-0x40b has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x4d6-0x4d6 has been reserved
system 00:08: ioport range 0x530-0x537 has been reserved
system 00:08: ioport range 0xc00-0xc01 has been reserved
system 00:08: ioport range 0xc14-0xc14 has been reserved
system 00:08: ioport range 0xc50-0xc52 has been reserved
system 00:08: ioport range 0xc6c-0xc6c has been reserved
system 00:08: ioport range 0xc6f-0xc6f has been reserved
system 00:08: ioport range 0xcd4-0xcd5 has been reserved
system 00:08: ioport range 0xcd6-0xcd7 has been reserved
system 00:08: ioport range 0xcd8-0xcdf has been reserved
system 00:08: ioport range 0x8000-0x805f has been reserved
system 00:08: ioport range 0xf40-0xf47 has been reserved
system 00:08: ioport range 0x280-0x293 has been reserved
system 00:08: ioport range 0x87f-0x87f has been reserved
system 00:09: iomem range 0xe0000-0xfffff could not be reserved
system 00:09: iomem range 0xfff80000-0xffffffff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x9000-0x9fff
pci 0000:00:01.0:   MEM window: 0xd0100000-0xd01fffff
pci 0000:00:01.0:   PREFETCH window: 0xd8000000-0xdfffffff
pci 0000:02:0b.0: CardBus bridge, secondary bus 0000:09
pci 0000:02:0b.0:   IO window: 0x002000-0x0020ff
pci 0000:02:0b.0:   IO window: 0x002400-0x0024ff
pci 0000:02:0b.0:   PREFETCH window: 0x1c000000-0x1fffffff
pci 0000:02:0b.0:   MEM window: 0x24000000-0x27ffffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
pci 0000:00:14.4:   IO window: 0x2000-0x2fff
pci 0000:00:14.4:   MEM window: 0xd0200000-0xd02fffff
pci 0000:00:14.4:   PREFETCH window: 0x1c000000-0x21ffffff
pci 0000:02:0b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0x9000-0x9fff]
pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd01fffff]
pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff]
pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:02: resource 1 mem: [0xd0200000-0xd02fffff]
pci_bus 0000:02: resource 2 pref mem [0x1c000000-0x21ffffff]
pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:09: resource 0 io:  [0x2000-0x20ff]
pci_bus 0000:09: resource 1 io:  [0x2400-0x24ff]
pci_bus 0000:09: resource 2 pref mem [0x1c000000-0x1fffffff]
pci_bus 0000:09: resource 3 mem: [0x24000000-0x27ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3477k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1254160761.290:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 871
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:05.0: Boot video device
vesafb: framebuffer at 0xd8000000, mapped to 0xdc700000, using 1875k, total 65536k
vesafb: mode is 800x600x16, linelength=1600, pages=67
vesafb: protected mode interface info at c000:53c9
vesafb: pmi: set display start = c00c5437, set palette = c00c5471
vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
serial 0000:00:14.6: PCI INT B disabled
brd: module loaded
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
Switched to high resolution mode on CPU 0
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI No-Shortcut mode
PM: Checking image partition UUID=89434926-9abe-4b6a-9fea-a7c773b12338
PM: Resume from disk failed.
registered taskstats version 1
  Magic number: 9:369:998
pnp 00:00: hash matches
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 468k freed
SCSI subsystem initialized
libata version 3.00 loaded.
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8430 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8438 irq 15
ata1.00: ATA-6: TOSHIBA MK8025GAS, KA023A, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK8025GA KA02 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: ATAPI: _NEC DVD+/-RW ND-6650A, 1.42, max UDMA/33
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM            _NEC     DVD+-RW ND-6650A 1.42 PQ: 0 ANSI: 5
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
PM: Marking nosave pages: 000000000009f000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
Tomoyo security MAC extension available but disabled by default. If you want to
enable and use it, ccs-tools package must be installed.
udev: starting version 146
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0000000
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31-desktop586-2mnb ohci_hcd
usb usb1: SerialNumber: 0000:00:13.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0002000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31-desktop586-2mnb ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0001000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31-desktop586-2mnb ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor LNXCPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (70 C)
ACPI: Battery Slot [BAT0] (battery present)
fan PNP0C0B:00: registered as cooling_device1
ACPI: Fan [FAN0] (on)
fan PNP0C0B:01: registered as cooling_device2
ACPI: Fan [FAN1] (on)
usb 1-1: new low speed USB device using ohci_hcd and address 2
usb 1-1: New USB device found, idVendor=1020, idProduct=030a
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB HID Device       
usb 1-1: Manufacturer: PATEN
usb 1-1: configuration #1 chosen from 1 choice
usb 3-1: new low speed USB device using ohci_hcd and address 2
usb 3-1: New USB device found, idVendor=0b38, idProduct=0003
usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: USB-compliant keyboard
usb 3-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: PATEN USB HID Device         as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input3
generic-usb 0003:1020:030A.0001: input,hidraw0: USB HID v1.10 Mouse [PATEN USB HID Device        ] on usb-0000:00:13.0-1/input0
input: USB-compliant keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input4
generic-usb 0003:0B38:0003.0002: input,hidraw1: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:13.1-1/input0
input: USB-compliant keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.1/input/input5
generic-usb 0003:0B38:0003.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:13.1-1/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usbcore: registered new interface driver wacom
wacom: v1.51:USB Wacom Graphire and Wacom Intuos tablet driver
loop: module loaded
Non-volatile memory driver v1.3
tifm_7xx1 0000:02:0b.3: PCI INT B -> GSI 22 (level, low) -> IRQ 22
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
EXT3 FS on sda5, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Adding 5767292k swap on /dev/sda7.  Priority:-1 extents:1 across:5767292k
floppy0: no floppy controllers found
yenta_cardbus 0000:02:0b.0: CardBus bridge found [1734:1098]
yenta_cardbus 0000:02:0b.0: Enabling burst memory read transactions
yenta_cardbus 0000:02:0b.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:0b.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:0b.0: TI: mfunc 0x01ac1b22, devctl 0x66
yenta_cardbus 0000:02:0b.0: ISA IRQ mask 0x0ef8, PCI irq 20
yenta_cardbus 0000:02:0b.0: Socket status: 30000006
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #08 to #0c
yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge Memory window: 0x1c000000 - 0x21ffffff
pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
vboxadd: VirtualBox Guest PCI device not found.
vboxadd: VirtualBox Guest PCI device not found.
[drm] Initialized drm 1.1.0 20060810
vboxvfs: Unknown symbol vboxadd_cmc_open
vboxvfs: Unknown symbol RTLogBackdoorPrintf
vboxvfs: Unknown symbol vboxadd_cmc_ctl_guest_filter_mask
vboxvfs: Unknown symbol RTErrConvertToErrno
vboxvfs: Unknown symbol vboxadd_cmc_call
vboxvfs: Unknown symbol vboxadd_cmc_close
vboxvfs: Unknown symbol AssertMsg2
vboxvfs: Unknown symbol RTAssertShouldPanic
vboxvfs: Unknown symbol AssertMsg1
[drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] Num pipes: 3
[drm] writeback test succeeded in 1 usecs
imwheel[1026]: segfault at 33040010 ip 0804c932 sp bf954f70 error 4 in imwheel[8048000+e000]
ondemand governor failed, too long transition latency of HW, fallback to performance governor
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /devices/platform/pcspkr/input/input6
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8420, revision 0
ath_hal: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, RF2417)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sdhci-pci 0000:02:0b.4: SDHCI controller found [104c:8034] (rev 0)
sdhci-pci 0000:02:0b.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:02:0b.4] using PIO
Registered led device: mmc1::
mmc1: SDHCI controller on PCI [0000:02:0b.4] using PIO
Registered led device: mmc2::
mmc2: SDHCI controller on PCI [0000:02:0b.4] using PIO
b44 0000:02:0d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ssb: Sonics Silicon Backplane found on PCI device 0000:02:0d.0
ohci1394 0000:02:0b.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:40:ca:d9:a2:1a
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23]  MMIO=[d0219000-d02197ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ath_pci 0000:02:01.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
MadWifi: ath_attach: Switching rfkill capability off.
wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
ath_pci: wifi0: Atheros 2413: mem=0xd0200000, irq=23
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0040ca01337105ee]
BUG: unable to handle kernel NULL pointer dereference at 00000001
IP: [<00000001>] 0x1
*pde = 00000000
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:14.4/0000:02:01.0/net/ath0/flags
Modules linked in: hsfengine(P+) ath5k hsfosspec mac80211 ath cfg80211 rfkill wlan_scan_sta ath_rate_sample snd_atiixp_modem snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_atiixp ath_pci snd_ac97_codec snd_pcm_oss ac97_bus snd_mixer_oss snd_pcm snd_timer ohci1394 snd b44 ssb sdhci_pci mii soundcore wlan serio_raw ieee1394 sg sdhci sr_mod mmc_core snd_page_alloc led_class ath_hal(P) i2c_piix4 pcspkr shpchp pci_hotplug radeon drm i2c_core pcmcia yenta_socket rsrc_nonstatic pcmcia_core binfmt_misc cpufreq_ondemand cpufreq_conservative cpufreq_powersave p4_clockmod freq_table speedstep_lib tifm_7xx1 tifm_core nvram loop joydev wacom usbhid hid fan evdev rtc_cmos thermal processor battery button ac ehci_hcd ohci_hcd usbcore ide_generic ata_generic ide_pci_generic pata_acpi atiixp ide_gd_mod ide_core pata_atiixp libata sd_mod scsi_mod crc_t10dif ext3 jbd

Pid: 1193, comm: modprobe Tainted: P           (2.6.31-desktop586-2mnb #1) AMILO L Series
EIP: 0060:[<00000001>] EFLAGS: 00010246 CPU: 0
EIP is at 0x1
EAX: dfcaf614 EBX: 00000000 ECX: dfcaf620 EDX: 00000000
ESI: dfcaf620 EDI: b7a58008 EBP: c7c99fac ESP: c7c99f80
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process modprobe (pid: 1193, ti=c7c98000 task=daa0e380 task.ti=c7c98000)
Stack:
 c01830e4 c0202728 c7c99f90 593e6141 0009d93e 00000000 08d1dd70 593e6141
<0> b7a58008 08d1dd70 00000000 c7c98000 c01040c3 b7a58008 001775a4 08d1dd70
<0> 08d1dd70 00000000 08d25dd0 00000080 0000007b 0000007b 00000000 00000033
Call Trace:
 [<c01830e4>] ? sys_init_module+0xc4/0x220
 [<c0202728>] ? sys_read+0x58/0xa0
 [<c01040c3>] ? sysenter_do_call+0x12/0x28
Code:  Bad EIP value.
EIP: [<00000001>] 0x1 SS:ESP 0068:c7c99f80
CR2: 0000000000000001
---[ end trace 666b811bdda6f716 ]---
ondemand governor failed, too long transition latency of HW, fallback to performance governor
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
ADDRCONF(NETDEV_UP): eth0: link is not ready
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (7146 buckets, 28584 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
ClusterIP Version 0.8 loaded successfully
xt_time: kernel timezone is +0300
netfilter PSD loaded - (c) astaro AG
IFWLOG: register target
fuse init (API version 7.12)

Linux version 2.6.31-desktop-2mnb (herton@n2.mandriva.com) (gcc version 4.4.1 (GCC) ) #1 SMP Mon Sep 14 18:46:53 EDT 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001bea0000 (usable)
 BIOS-e820: 000000001bea0000 - 000000001beb4000 (ACPI data)
 BIOS-e820: 000000001beb4000 - 000000001bf00000 (ACPI NVS)
 BIOS-e820: 000000001bf00000 - 000000001c000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x1bea0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FF0000000 write-back
  1 base 010000000 mask FF8000000 write-back
  2 base 018000000 mask FFC000000 write-back
  3 base 01BF00000 mask FFFF00000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
PAT not supported by CPU.
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-000000001bea0000
 0000000000 - 0000400000 page 4k
 0000400000 - 001bc00000 page 2M
 001bc00000 - 001bea0000 page 4k
kernel direct mapping tables up to 1bea0000 @ 7000-d000
RAMDISK: 1bbfa000 - 1be8feb6
0MB HIGHMEM available.
446MB LOWMEM available.
  mapped low ram: 0 - 1bea0000
  low ram: 0 - 1bea0000
  node 0 low ram: 00000000 - 1bea0000
  node 0 bootmap 00002000 - 000057d4
(9 early reservations) ==> bootmem [0000000000 - 001bea0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 0000778e84]    TEXT DATA BSS ==> [0000100000 - 0000778e84]
  #4 [001bbfa000 - 001be8feb6]          RAMDISK ==> [001bbfa000 - 001be8feb6]
  #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #6 [0000779000 - 000077c108]              BRK ==> [0000779000 - 000077c108]
  #7 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
  #8 [0000002000 - 0000006000]          BOOTMAP ==> [0000002000 - 0000006000]
found SMP MP-table at [c00f74c0] f74c0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x0001bea0
  HighMem  0x0001bea0 -> 0x0001bea0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0001bea0
On node 0 totalpages: 114239
free_area_init_node: node 0, pgdat c063fda0, node_mem_map c1000000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 862 pages used for memmap
  Normal zone: 109378 pages, LIFO batch:31
Using APIC driver default
SB4X0 revision 0x11
Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
MPTABLE: OEM ID: 
MPTABLE: Product ID: RS400 Board
MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
I/O APIC #1 Version 33 at 0xFEC00000.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Processors: 1
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 1c000000 (gap: 1c000000:e2c00000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages at c1382000, static data 35100 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113345
Kernel command line: BOOT_IMAGE=linux root=UUID=b0ad77cc-d21f-478c-a63b-b881c609daed  acpi=off resume=UUID=89434926-9abe-4b6a-9fea-a7c773b12338 splash=silent vga=788
PID hash table entries: 2048 (order: 11, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 443360k/457344k available (3546k kernel code, 13372k reserved, 1878k data, 468k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffd55000 - 0xfffff000   (2728 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xdc6a0000 - 0xff3fe000   ( 557 MB)
    lowmem  : 0xc0000000 - 0xdbea0000   ( 446 MB)
      .init : 0xc064d000 - 0xc06c2000   ( 468 kB)
      .data : 0xc0476b8a - 0xc064c688   (1878 kB)
      .text : 0xc0100000 - 0xc0476b8a   (3546 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:1280
Fast TSC calibration using PIT
Detected 1600.292 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.58 BogoMIPS (lpj=1600292)
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Performance Counters: p6 PMU driver.
... version:                 0
... bit width:               32
... generic counters:        2
... value mask:              00000000ffffffff
... max period:              000000007fffffff
... fixed-purpose counters:  0
... counter mask:            0000000000000003
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 20k freed
ACPI: Checking initramfs for custom DSDT
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 14149 entries in 28 pages
ExtINT not setup in hardware but reported by MP table
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 0) ...
....... works.
CPU0: Intel(R) Celeron(R) M processor         1.60GHz stepping 08
Brought up 1 CPUs
Total of 1 processors activated (3200.58 BogoMIPS).
CPU0 attaching NULL sched-domain.
devtmpfs: initialized
Booting paravirtualized kernel on bare hardware
Time: 14:21:54  Date: 09/30/09
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd8ad, last bus=8
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter disabled.
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
pci 0000:00:13.0: reg 10 32bit mmio: [0xd0000000-0xd0000fff]
pci 0000:00:13.1: reg 10 32bit mmio: [0xd0001000-0xd0001fff]
pci 0000:00:13.2: reg 10 32bit mmio: [0xd0002000-0xd0002fff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: reg 10 io port: [0x8420-0x842f]
pci 0000:00:14.0: reg 14 32bit mmio: [0xd0003000-0xd00033ff]
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:14.1: reg 10 io port: [0x8450-0x8457]
pci 0000:00:14.1: reg 14 io port: [0x8444-0x8447]
pci 0000:00:14.1: reg 18 io port: [0x8448-0x844f]
pci 0000:00:14.1: reg 1c io port: [0x8440-0x8443]
pci 0000:00:14.1: reg 20 io port: [0x8430-0x843f]
pci 0000:00:14.5: reg 10 32bit mmio: [0xd0003400-0xd00034ff]
pci 0000:00:14.6: reg 10 32bit mmio: [0xd0003800-0xd00038ff]
pci 0000:01:05.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
pci 0000:01:05.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff]
pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff]
pci 0000:02:01.0: reg 10 32bit mmio: [0xd0200000-0xd020ffff]
pci 0000:02:0b.0: reg 10 32bit mmio: [0xd0218000-0xd0218fff]
pci 0000:02:0b.0: supports D1 D2
pci 0000:02:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:0b.0: PME# disabled
pci 0000:02:0b.2: reg 10 32bit mmio: [0xd0219000-0xd02197ff]
pci 0000:02:0b.2: reg 14 32bit mmio: [0xd0210000-0xd0213fff]
pci 0000:02:0b.2: supports D1 D2
pci 0000:02:0b.2: PME# supported from D0 D1 D2 D3hot
pci 0000:02:0b.2: PME# disabled
pci 0000:02:0b.3: reg 10 32bit mmio: [0xd0214000-0xd0215fff]
pci 0000:02:0b.3: supports D1 D2
pci 0000:02:0b.3: PME# supported from D0 D1 D2 D3hot
pci 0000:02:0b.3: PME# disabled
pci 0000:02:0b.4: reg 10 32bit mmio: [0xd021a000-0xd021a0ff]
pci 0000:02:0b.4: reg 14 32bit mmio: [0xd0219c00-0xd0219cff]
pci 0000:02:0b.4: reg 18 32bit mmio: [0xd0219800-0xd02198ff]
pci 0000:02:0b.4: supports D1 D2
pci 0000:02:0b.4: PME# supported from D0 D1 D2 D3hot
pci 0000:02:0b.4: PME# disabled
pci 0000:02:0d.0: reg 10 32bit mmio: [0xd0216000-0xd0217fff]
pci 0000:02:0d.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:02:0d.0: supports D1 D2
pci 0000:02:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:0d.0: PME# disabled
pci 0000:00:14.4: transparent bridge
pci 0000:00:14.4: bridge 32bit mmio: [0xd0200000-0xd02fffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: PnP ACPI: disabled
PnPBIOS: Disabled
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x9000-0x9fff
pci 0000:00:01.0:   MEM window: 0xd0100000-0xd01fffff
pci 0000:00:01.0:   PREFETCH window: 0xd8000000-0xdfffffff
pci 0000:02:0b.0: CardBus bridge, secondary bus 0000:09
pci 0000:02:0b.0:   IO window: 0x001000-0x0010ff
pci 0000:02:0b.0:   IO window: 0x001400-0x0014ff
pci 0000:02:0b.0:   PREFETCH window: 0x1c000000-0x1fffffff
pci 0000:02:0b.0:   MEM window: 0x24000000-0x27ffffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
pci 0000:00:14.4:   IO window: 0x1000-0x1fff
pci 0000:00:14.4:   MEM window: 0xd0200000-0xd02fffff
pci 0000:00:14.4:   PREFETCH window: 0x1c000000-0x21ffffff
pci 0000:02:0b.0: PCI->APIC IRQ transform: INT A -> IRQ 102
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0x9000-0x9fff]
pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd01fffff]
pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff]
pci_bus 0000:02: resource 0 io:  [0x1000-0x1fff]
pci_bus 0000:02: resource 1 mem: [0xd0200000-0xd02fffff]
pci_bus 0000:02: resource 2 pref mem [0x1c000000-0x21ffffff]
pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:09: resource 0 io:  [0x1000-0x10ff]
pci_bus 0000:09: resource 1 io:  [0x1400-0x14ff]
pci_bus 0000:09: resource 2 pref mem [0x1c000000-0x1fffffff]
pci_bus 0000:09: resource 3 mem: [0x24000000-0x27ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2647k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
type=2000 audit(1254320514.300:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 871
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:05.0: Boot video device
vesafb: framebuffer at 0xd8000000, mapped to 0xdc700000, using 1875k, total 65536k
vesafb: mode is 800x600x16, linelength=1600, pages=67
vesafb: protected mode interface info at c000:53c9
vesafb: pmi: set display start = c00c5437, set palette = c00c5471
vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial 0000:00:14.6: PCI->APIC IRQ transform: INT B -> IRQ 17
brd: module loaded
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI No-Shortcut mode
PM: Checking image partition UUID=89434926-9abe-4b6a-9fea-a7c773b12338
PM: Resume from disk failed.
registered taskstats version 1
  Magic number: 9:580:385
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 468k freed
SCSI subsystem initialized
libata version 3.00 loaded.
pata_atiixp 0000:00:14.1: PCI->APIC IRQ transform: INT A -> IRQ 16
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8430 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8438 irq 15
ata1.00: ATA-6: TOSHIBA MK8025GAS, KA023A, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK8025GA KA02 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: ATAPI: _NEC DVD+/-RW ND-6650A, 1.42, max UDMA/33
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM            _NEC     DVD+-RW ND-6650A 1.42 PQ: 0 ANSI: 5
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
Tomoyo security MAC extension available but disabled by default. If you want to
enable and use it, ccs-tools package must be installed.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
udev: starting version 146
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 19
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0000000
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31-desktop-2mnb ohci_hcd
usb usb1: SerialNumber: 0000:00:13.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:13.2: PCI->APIC IRQ transform: INT A -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0002000
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31-desktop-2mnb ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci_hcd 0000:00:13.1: PCI->APIC IRQ transform: INT A -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0001000
input: PC Speaker as /devices/platform/pcspkr/input/input0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31-desktop-2mnb ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:02:0b.4: SDHCI controller found [104c:8034] (rev 0)
broken BIOS!!
sdhci-pci 0000:02:0b.4: PCI->APIC IRQ transform: INT B -> IRQ 102
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:02:0b.4] using PIO
Registered led device: mmc1::
mmc1: SDHCI controller on PCI [0000:02:0b.4] using PIO
Registered led device: mmc2::
mmc2: SDHCI controller on PCI [0000:02:0b.4] using PIO
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8420, revision 0
yenta_cardbus 0000:02:0b.0: CardBus bridge found [1734:1098]
yenta_cardbus 0000:02:0b.0: Enabling burst memory read transactions
yenta_cardbus 0000:02:0b.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:0b.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:0b.0: TI: mfunc 0x01ac1b22, devctl 0x66
yenta_cardbus 0000:02:0b.0: TI: probing PCI interrupt failed, trying to fix
yenta_cardbus 0000:02:0b.0: TI: falling back to parallel PCI interrupts
cfg80211: Calling CRDA to update world regulatory domain
yenta_cardbus 0000:02:0b.0: Yenta TI: no PCI interrupts. Fish. Please report.
yenta_cardbus 0000:02:0b.0: no PCI IRQ, CardBus support disabled for this socket.
yenta_cardbus 0000:02:0b.0: check your BIOS CardBus, BIOS IRQ or ACPI settings.
yenta_cardbus 0000:02:0b.0: ISA IRQ mask 0x06b8, PCI irq 0
yenta_cardbus 0000:02:0b.0: Socket status: 30000006
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #08 to #0c
yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x1000-0x1fff: clean.
yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge Memory window: 0x1c000000 - 0x21ffffff
usb 1-1: new low speed USB device using ohci_hcd and address 2
usb 1-1: New USB device found, idVendor=1020, idProduct=030a
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB HID Device       
usb 1-1: Manufacturer: PATEN
usb 1-1: configuration #1 chosen from 1 choice
cfg80211: World regulatory domain updated:
   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
b44 0000:02:0d.0: PCI->APIC IRQ transform: INT A -> IRQ 17
ssb: Sonics Silicon Backplane found on PCI device 0000:02:0d.0
broken BIOS!!
broken BIOS!!
ohci1394 0000:02:0b.2: PCI->APIC IRQ transform: INT C -> IRQ 10
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:40:ca:d9:a2:1a
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[d0219000-d02197ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ath5k 0000:02:01.0: PCI->APIC IRQ transform: INT A -> IRQ 17
ath5k 0000:02:01.0: registered as 'phy0'
usb 3-1: new low speed USB device using ohci_hcd and address 2
ath: EEPROM regdomain: 0x30
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: AM
ath: Regpair used: 0x30
usb 3-1: New USB device found, idVendor=0b38, idProduct=0003
usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: USB-compliant keyboard
usb 3-1: configuration #1 chosen from 1 choice
phy0: Selected rate control algorithm 'minstrel'
ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
cfg80211: Calling CRDA for country: AM
cfg80211: Regulatory domain changed to country: AM
   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
usbcore: registered new interface driver hiddev
input: PATEN USB HID Device         as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input1
generic-usb 0003:1020:030A.0001: input,hidraw0: USB HID v1.10 Mouse [PATEN USB HID Device        ] on usb-0000:00:13.0-1/input0
input: USB-compliant keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input2
generic-usb 0003:0B38:0003.0002: input,hidraw1: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:13.1-1/input0
ATI IXP MC97 controller 0000:00:14.6: PCI->APIC IRQ transform: INT B -> IRQ 17
ATI IXP AC97 controller 0000:00:14.5: PCI->APIC IRQ transform: INT B -> IRQ 17
input: USB-compliant keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.1/input/input3
name_count maxed, losing inode data: dev=00:05, inode=2827
name_count maxed, losing inode data: dev=00:05, inode=4
name_count maxed, losing inode data: dev=00:05, inode=4
name_count maxed, losing inode data: dev=00:05, inode=2829
name_count maxed, losing inode data: dev=00:05, inode=2829
name_count maxed, losing inode data: dev=00:05, inode=4
name_count maxed, losing inode data: dev=00:05, inode=4
generic-usb 0003:0B38:0003.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:13.1-1/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
name_count maxed, losing inode data: dev=00:05, inode=2968
name_count maxed, losing inode data: dev=00:05, inode=4
name_count maxed, losing inode data: dev=00:05, inode=4
Non-volatile memory driver v1.3
broken BIOS!!
tifm_7xx1 0000:02:0b.3: PCI->APIC IRQ transform: INT B -> IRQ 102
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
EXT3 FS on sda5, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
name_count maxed, losing inode data: dev=00:07, inode=3304
name_count maxed, losing inode data: dev=00:05, inode=4
name_count maxed, losing inode data: dev=00:05, inode=4
name_count maxed, losing inode data: dev=00:07, inode=8
name_count maxed, losing inode data: dev=00:07, inode=3306
name_count maxed, losing inode data: dev=00:05, inode=4
name_count maxed, losing inode data: dev=00:05, inode=4
name_count maxed, losing inode data: dev=00:07, inode=8
name_count maxed, losing inode data: dev=00:07, inode=3309
name_count maxed, losing inode data: dev=00:05, inode=4
name_count maxed, losing inode data: dev=00:05, inode=4
name_count maxed, losing inode data: dev=00:07, inode=8
name_count maxed, losing inode data: dev=00:07, inode=3312
name_count maxed, losing inode data: dev=00:05, inode=4
name_count maxed, losing inode data: dev=00:05, inode=4
name_count maxed, losing inode data: dev=00:07, inode=8
name_count maxed, losing inode data: dev=00:07, inode=3315
name_count maxed, losing inode data: dev=00:05, inode=4
name_count maxed, losing inode data: dev=00:05, inode=4
name_count maxed, losing inode data: dev=00:07, inode=8
name_count maxed, losing inode data: dev=00:07, inode=3318
loop: module loaded
Adding 5767292k swap on /dev/sda7.  Priority:-1 extents:1 across:5767292k
ondemand governor failed, too long transition latency of HW, fallback to performance governor
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
cfg80211: Calling CRDA for country: EE
cfg80211: Regulatory domain changed to country: EE
   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
ADDRCONF(NETDEV_UP): eth0: link is not ready
ip_tables: (C) 2000-2006 Netfilter Core Team
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (7146 buckets, 28584 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
pci 0000:01:05.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[drm] Initialized drm 1.1.0 20060810
ctnetlink v0.93: registering with nfnetlink.
[drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0
NET: Registered protocol family 17
ClusterIP Version 0.8 loaded successfully
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] Num pipes: 3
[drm] writeback test succeeded in 1 usecs
xt_time: kernel timezone is -0000
irq 17: nobody cared (try booting with the "irqpoll" option)
Pid: 1797, comm: sh Not tainted 2.6.31-desktop-2mnb #1
Call Trace:
 [<c046e50a>] ? printk+0x28/0x3e
 [<c0199e78>] __report_bad_irq+0x38/0xb0
 [<c019a06a>] note_interrupt+0x17a/0x1c0
 [<c019a77b>] handle_fasteoi_irq+0xab/0xe0
 [<c010692d>] handle_irq+0x2d/0x50
 [<c0105d58>] do_IRQ+0x58/0xe0
 [<c0104770>] common_interrupt+0x30/0x38
handlers:
[<dcf24210>] (ath5k_intr+0x0/0x2f0 [ath5k])
[<dd227820>] (snd_atiixp_interrupt+0x0/0x140 [snd_atiixp_modem])
[<dd23ca30>] (snd_atiixp_interrupt+0x0/0x160 [snd_atiixp])
[<dce030b0>] (b44_interrupt+0x0/0x110 [b44])
Disabling IRQ #17
netfilter PSD loaded - (c) astaro AG
IFWLOG: register target
eth0: no IPv6 routers present
imwheel[2148]: segfault at 130 ip 0804c932 sp bf98ce60 error 4 in imwheel[8048000+e000]
fuse init (API version 7.12)
type=1305 audit(1254320611.989:61978): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
end_request: I/O error, dev sr0, sector 9180288
Buffer I/O error on device sr0, logical block 1147536
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
end_request: I/O error, dev sr0, sector 9180288
Buffer I/O error on device sr0, logical block 1147536
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
end_request: I/O error, dev sr0, sector 9180400
Buffer I/O error on device sr0, logical block 1147550
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
end_request: I/O error, dev sr0, sector 9180400
Buffer I/O error on device sr0, logical block 1147550
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
end_request: I/O error, dev sr0, sector 9180408
Buffer I/O error on device sr0, logical block 1147551
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
end_request: I/O error, dev sr0, sector 9180408
Buffer I/O error on device sr0, logical block 1147551
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
end_request: I/O error, dev sr0, sector 9180408
Buffer I/O error on device sr0, logical block 1147551
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
end_request: I/O error, dev sr0, sector 9180408
Buffer I/O error on device sr0, logical block 1147551
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
end_request: I/O error, dev sr0, sector 9180408
Buffer I/O error on device sr0, logical block 1147551
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
end_request: I/O error, dev sr0, sector 9180408
Buffer I/O error on device sr0, logical block 1147551
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
end_request: I/O error, dev sr0, sector 9180408
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
end_request: I/O error, dev sr0, sector 9180352
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
end_request: I/O error, dev sr0, sector 9180400
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
end_request: I/O error, dev sr0, sector 9180408
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
end_request: I/O error, dev sr0, sector 9180408