| Autor |
Sõnum |
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
Vajutad desktopil cd seadme ikoonil ja ülatus, üllatus - annab sellise veateate:
Seadet pole võimalik ühendada.
Tagastatud veateade:
mount: wrong fs type, bad option, bad superblock on /dev/hdb,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Kasutan debiani
|
|
|
|
Viimati muutis heinar 29.03.2006, 22:21; muudetud 1 kord
|
|
|
  |
pacho
Moderaator
Vanus: 43
Liitunud: 08.07.2005
Postitused: 618
Distributsioon: Debian GNU/Linux
|
|
| heinar kirjutas: | |
In some cases useful info is found in syslog - try
dmesg | tail or so
|
Ja mis see räägib?
Kas pärast veateadet on võimalik cd seadme sahtel nupust välja lasta?
Üksvahe oli KDE'ga mingi jama, et andis veateate, kuid sellest hoolimata ühendas seadme /media/cdrom'i külge.
|
|
|
|
_________________
http://blog.pacho.pri.ee/
|
|
|
 |
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
Linux version 2.6.8-2-386 (horms@tabatha.lab.ultramonkey.org) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Tue Aug 16 12:46:35 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI not present.
ACPI: RSDP (v000 VIA694 ) @ 0x000f7280
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Kernel command line: root=/dev/hda1 ro
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 750.544 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 252172k/262080k available (1337k kernel code, 9172k reserved, 732k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1482.75 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 749.0852 MHz.
..... host bus clock speed is 199.0960 MHz.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4216k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ11 SCI: Level Trigger.
spurious 8259A interrupt: IRQ7.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fbcb0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbce0, dseg 0xf0000
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 10 (level, low) -> IRQ 10
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
PCI: Disabling Via external APIC routing
PCI: Via IRQ fixup for 0000:00:07.2, from 9 to 10
PCI: Via IRQ fixup for 0000:00:07.3, from 9 to 10
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4216 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 204k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD200BB-00AUA1, ATA DISK drive
hdb: _NEC NR-7700A, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(66)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 498004k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
Real Time Clock Driver v1.12
Generic RTC Driver v1.07
hdb: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Capability LSM initialized
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.100 (c) Dave Jones
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
parport0: Printer, Canon BJC-1000
parport_pc: VIA parallel port: io=0x378, irq=7
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xdc00, 00:e0:4c:10:04:c0, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:07.2: irq 10, io base 0000d400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:07.3: irq 10, io base 0000d800
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 128M @ 0xd0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
gameport: pci0000:00:0a.1 speed 1269 kHz
input: PC Speaker
inserting floppy driver for 2.6.8-2-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 17
lp0: using parport0 (interrupt-driven).
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02cc960(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
hdb: command error: status=0x51 { DriveReady SeekComplete Error }
hdb: command error: error=0x54
end_request: I/O error, dev hdb, sector 64
isofs_fill_super: bread failed, dev=hdb, iso_blknum=16, block=16
hdb: command error: status=0x51 { DriveReady SeekComplete Error }
hdb: command error: error=0x54
end_request: I/O error, dev hdb, sector 64
isofs_fill_super: bread failed, dev=hdb, iso_blknum=16, block=16
hdb: command error: status=0x51 { DriveReady SeekComplete Error }
hdb: command error: error=0x54
end_request: I/O error, dev hdb, sector 64
isofs_fill_super: bread failed, dev=hdb, iso_blknum=16, block=16
hdb: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdb: packet command error: error=0xb4
ATAPI device hdb:
Error: Aborted command -- (Sense key=0x0b)
Play operation aborted -- (asc=0xb9, ascq=0x00)
The failed "Pause/Resume" packet command was:
"4b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "
hdb: command error: status=0x51 { DriveReady SeekComplete Error }
hdb: command error: error=0x54
end_request: I/O error, dev hdb, sector 64
isofs_fill_super: bread failed, dev=hdb, iso_blknum=16, block=16
hdb: command error: status=0x51 { DriveReady SeekComplete Error }
hdb: command error: error=0x54
end_request: I/O error, dev hdb, sector 64
isofs_fill_super: bread failed, dev=hdb, iso_blknum=16, block=16
hdb: command error: status=0x51 { DriveReady SeekComplete Error }
hdb: command error: error=0x54
end_request: I/O error, dev hdb, sector 64
isofs_fill_super: bread failed, dev=hdb, iso_blknum=16, block=16
hdb: command error: status=0x51 { DriveReady SeekComplete Error }
hdb: command error: error=0x54
end_request: I/O error, dev hdb, sector 64
isofs_fill_super: bread failed, dev=hdb, iso_blknum=16, block=16
|
|
|
|
|
|
|
|
laurivosandi
Moderaator
Vanus: 36
Liitunud: 08.07.2005
Postitused: 647
Asukoht: Tallinn
Distributsioon: Estobuntu, Debian
|
|
| no selleks ei pea fyysika olema et aru saada et su CD on puuksus ja lugeja ei loe v2lja
|
|
|
|
|
|
|
 |
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
| panin audio plaadi peale ja Kscd hakkas seda mängima- aga heli pole ju siis jätkuvalt mingi helikaardi error
|
|
|
|
|
|
|
|
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
| loodan et mitte- sest huvitaval kombel saan knoppixi live cd käima ja kettalt kuulata mussi
|
|
|
|
|
|
|
|
pacho
Moderaator
Vanus: 43
Liitunud: 08.07.2005
Postitused: 618
Distributsioon: Debian GNU/Linux
|
|
| heinar kirjutas: | | panin audio plaadi peale ja Kscd hakkas seda mängima- aga heli pole ju siis jätkuvalt mingi helikaardi error |
Vaata, et väljundikanalid poleks vaigistatud.
|
|
|
|
_________________
http://blog.pacho.pri.ee/
|
|
|
|
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
|
|
vih
Moderaator
Liitunud: 10.08.2005
Postitused: 654
|
|
| kmix. Teed Mixeri lahti ning vaatad, et Volume ja PCM oleksid sees.
|
|
|
|
|
|
|
|
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
| mul oli kõvakettal mingid paar lugu ja panin mängima ja kae imet - mängib nagu loom! Paistab et cd seade ei funka- kas ehk saaks abi, see tööle saada?
|
|
|
|
|
|
|
|
obundra
Vana Pingviin
Vanus: 49
Liitunud: 04.08.2005
Postitused: 1213
Asukoht: 127.0.0.1
Distributsioon: RHEL, Solaris, Debian, Gentoo
|
|
| heinar kirjutas: | | panin audio plaadi peale ja Kscd hakkas seda mängima- aga heli pole ju siis jätkuvalt mingi helikaardi error |
Kui sul cd-romi ja helikaardi vahelist audiokaablit pole, siis ongi vaikus.Kscd seadistustes luba kasutada otsest digitaalesitust.
|
|
|
|
_________________
IT teenused
|
|
|
|
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
| Tänud- see nõu oli küll nüüd väärt!
|
|
|
|
|
|
|
|
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
| Sain cd seadme tööle [ lahendatud ]
|
|
|
|
|
|
|
|
|
|
|
