 |
| Autor |
Sõnum |
Abies
Uus kasutaja
Liitunud: 05.08.2008
Postitused: 1
|
|
Probleem järgmine:
Üritan juba mitmendat päeva Ubuntu 8.04 all käima ajada Hauppage HVR-1100 tv-kaarti.
Windooza all leiab kenast kõik mu 3 kanalit - ETV, Kanal2, TV3 üles, aga linuxi all pole suutnud pilti ette saada. Ootaks igasugu abi, sest hetkel google õpetuste põhjal tehes.. pole suutnud pilti saada:(
dmesg annab näitab nagu, et kõiks peaks toimima
[ 45.684151] cx88[0]: subsystem: 0070:9402, board: Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40,autodetected]
[ 45.684154] cx88[0]: TV tuner type 63, Radio tuner type -1
[ 45.739683] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
[ 45.833063] tveeprom 2-0050: Hauppauge model 94009, rev C3A0, serial# 751310
[ 45.833069] tveeprom 2-0050: MAC address is 00-0D-FE-0B-76-CE
[ 45.833072] tveeprom 2-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
[ 45.833076] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 45.833079] tveeprom 2-0050: audio processor is CX882 (idx 33)
[ 45.833081] tveeprom 2-0050: decoder processor is CX882 (idx 25)
[ 45.833083] tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter
[ 45.833086] cx88[0]: hauppauge eeprom: model=94009
[ 45.833799] input: cx88 IR (Hauppauge WinTV-HVR110 as /devices/pci0000:00/0000:00:08.0/0000:01:0a.0/input/input5
[ 45.868685] cx2388x alsa driver version 0.0.6 loaded
[ 45.922244] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 45.936798] cx88[0]/0: found at 0000:01:0a.0, rev: 5, irq: 19, latency: 32, mmio: 0xe7000000
[ 46.080700] tuner 2-0061: chip found @ 0xc2 (cx88[0])
[ 46.082889] tuner-simple 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 46.082893] tuner 2-0061: type set to Philips FMD1216ME M
[ 46.085087] tuner-simple 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 46.085090] tuner 2-0061: type set to Philips FMD1216ME M
[ 46.085780] tuner 2-0063: chip found @ 0xc6 (cx88[0])
[ 46.091486] cx88[0]/0: registered device video0 [v4l2]
[ 46.091505] cx88[0]/0: registered device vbi0
[ 46.091527] cx88[0]/0: registered device radio0
[ 46.132213] cx88[0]/2: cx2388x 8802 Driver Manager
[ 46.132245] ACPI: PCI Interrupt 0000:01:0a.2[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 19
[ 46.132255] cx88[0]/2: found at 0000:01:0a.2, rev: 5, irq: 19, latency: 32, mmio: 0xe9000000
[ 46.132698] ACPI: PCI Interrupt 0000:01:0a.1[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 19
[ 46.132728] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 46.319761] cx88/2: cx2388x dvb driver version 0.0.6 loaded
[ 46.319768] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 46.319772] cx88[0]/2: subsystem: 0070:9402, board: Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40]
[ 46.319776] cx88[0]/2: cx2388x based DVB/ATSC card
[ 46.743480] DVB: registering new adapter (cx88[0])
[ 46.743487] DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
-----------
|
|
|
|
|
|
|
  |
obundra
Vana Pingviin
Vanus: 49
Liitunud: 04.08.2005
Postitused: 1213
Asukoht: 127.0.0.1
Distributsioon: RHEL, Solaris, Debian, Gentoo
|
|
Selle kaardiga peaksid edukalt nägema Levira digi-tv 7 vaba kanalit.
Kas seade dvb tehakse?Kontrolliks käsk "ls -l /dev/dvb" , võimalik ka, et puudu õige firmware, kontrolliks "grep firmware /var/log/messages".
Peaaegu sama kaart, ainult teine kuju ja Philips TDA10046 chipset, "käimajooksmine" linuxiga sama.Võimalik, et pead uued dvb moodulid keevitama, õpetus
Leidsin ühe õpetuse ka, küll vanema *buntu tarvis aga erilist vahet ei tohiks olla, link.
Veel juttu .
|
|
|
|
_________________
IT teenused
|
|
|
 |
|
|
|
|
Powered by phpBB2 Plus based on phpBB © 2001/7 phpBB Group
|
|
