| Autor |
Sõnum |
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
| soundblasteriga midagi viltu
|
|
|
|
Viimati muutis heinar 29.03.2006, 22:18; muudetud 4 korda
|
|
|
  |
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
lsmod:Module Size Used by Not tainted
snd-pcm-oss 34432 0 (autoclean) (unused)
snd-pcm 49704 0 (autoclean) [snd-pcm-oss]
snd-timer 12804 0 (autoclean) [snd-pcm]
snd-mixer-oss 11096 0 (autoclean) [snd-pcm-oss]
snd 29444 0 (autoclean) [snd-pcm-oss snd-pcm snd-timer snd-mixer-oss]
snd-page-alloc 4804 0 (autoclean) [snd-pcm snd-timer snd-mixer-oss snd]
soundcore 3268 0 (autoclean) [snd]
floppy 44120 0 (autoclean)
input 3040 0 (autoclean)
apm 8428 1 (autoclean)
lp 5540 0
af_packet 11048 1 (autoclean)
usb-uhci 19472 0 (unused)
usbcore 52268 1 [usb-uhci]
ide-scsi 8272 0
scsi_mod 86084 1 [ide-scsi]
8139too 12328 1
mii 1952 0 [8139too]
crc32 2848 0 [8139too]
parport_pc 19432 1
parport 21608 1 [lp parport_pc]
agpgart 39108 0 (unused)
ide-cd 27104 0
cdrom 26212 0 [ide-cd]
rtc 5768 0 (autoclean)
ext3 65388 1 (autoclean)
jbd 34628 1 (autoclean) [ext3]
ide-detect 288 0 (autoclean) (unused)
via82cxxx 9256 1 (autoclean)
ide-disk 12480 2 (autoclean)
ide-core 91864 2 (autoclean) [ide-scsi ide-cd ide-detect via82cxxx ide-disk]
unix 12752 235 (autoclean)
debian:/home/heinar# lsmod
Module Size Used by Not tainted
snd-pcm-oss 34432 0 (autoclean) (unused)
snd-pcm 49704 0 (autoclean) [snd-pcm-oss]
snd-timer 12804 0 (autoclean) [snd-pcm]
snd-mixer-oss 11096 0 (autoclean) [snd-pcm-oss]
snd 29444 0 (autoclean) [snd-pcm-oss snd-pcm snd-timer snd-mixer-oss]
snd-page-alloc 4804 0 (autoclean) [snd-pcm snd-timer snd-mixer-oss snd]
soundcore 3268 0 (autoclean) [snd]
floppy 44120 0 (autoclean)
input 3040 0 (autoclean)
apm 8428 1 (autoclean)
lp 5540 0
af_packet 11048 1 (autoclean)
usb-uhci 19472 0 (unused)
usbcore 52268 1 [usb-uhci]
ide-scsi 8272 0
scsi_mod 86084 1 [ide-scsi]
8139too 12328 1
mii 1952 0 [8139too]
crc32 2848 0 [8139too]
parport_pc 19432 1
parport 21608 1 [lp parport_pc]
agpgart 39108 0 (unused)
ide-cd 27104 0
cdrom 26212 0 [ide-cd]
rtc 5768 0 (autoclean)
ext3 65388 1 (autoclean)
jbd 34628 1 (autoclean) [ext3]
ide-detect 288 0 (autoclean) (unused)
via82cxxx 9256 1 (autoclean)
ide-disk 12480 2 (autoclean)
ide-core 91864 2 (autoclean) [ide-scsi ide-cd ide-detect via82cxxx ide-disk]
unix 12752 235 (autoclean)
ja lspci:0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10)
0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
0000:00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)0000:00:0c.0 Communication controller: Analog Devices SM56 PCI modem
0000:01:00.0 VGA compatible controller: nVidia Corporation NV10 [GeForce 256 SDR] (rev 10)
|
|
|
|
|
|
|
|
pacho
Moderaator
Vanus: 43
Liitunud: 08.07.2005
Postitused: 618
Distributsioon: Debian GNU/Linux
|
|
Mis kaart täpselt?
Mudelinime mõtlen.
Ja kontrolli, et kõik oleks füüsiliselt õieti ühendatud.
|
|
|
|
_________________
http://blog.pacho.pri.ee/
|
|
|
 |
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
| helikaart on: Soundblaster Live!1024 ( Creative Labs )
|
|
|
|
|
|
|
|
imre
Vana Pingviin
Liitunud: 16.08.2005
Postitused: 2648
Asukoht: Saku kant
Distributsioon: Ubuntu
|
|
Vaata ka, mida dmesg ja var/log/messages näitavad.
Ehk selgub sealt, miks kaarti ei leita.
|
|
|
|
_________________
Enne teema püstitamist kasutage OTSINGUT
Küsi targalt: Infot siit!
Kui aru ei saa, siis küsi.
|
|
|
|
vih
Moderaator
Liitunud: 10.08.2005
Postitused: 654
|
|
| Ma näen sul seda moodulit via82cxxx. Ütle palun kas sa oled installinud alsat ning kas sa kasutad KDE-t, Gnome vms?
|
|
|
|
|
|
|
|
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
| installisin alsa ja kasutan kde-d
|
|
|
|
|
|
|
|
pacho
Moderaator
Vanus: 43
Liitunud: 08.07.2005
Postitused: 618
Distributsioon: Debian GNU/Linux
|
|
tahaks ka dmesg väljundit näha.
Ja proovi käsitsi draiver laadida, vaata mis veateate annab
| Tsitaat: | | modprobe snd-emu10k1 |
|
|
|
|
_________________
http://blog.pacho.pri.ee/
|
|
|
|
jrepan
Moderaator
Liitunud: 18.08.2005
Postitused: 317
Distributsioon: Arch Linux
|
|
Kirjuta terminali root kasutajana:
Sellega on väga kerge ALSAt seadistada
|
|
|
|
|
|
|
|
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
modprobe snd-emu10k1
/lib/modules/2.4.27-2-386/updates/alsa/snd-emu10k1.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.27-2-386/updates/alsa/snd-emu10k1.o: insmod /lib/modules/2.4.27-2-386/updates/alsa/snd-emu10k1.o failed
/lib/modules/2.4.27-2-386/updates/alsa/snd-emu10k1.o: insmod snd-emu10k1 failed
|
|
|
|
|
|
|
|
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
dmesg
Linux version 2.4.27-2-386 (horms@tabatha.lab.ultramonkey.org) (gcc version 3.3.6 (Debian 1:3.3.6-10)) #1 Wed Nov 30 21:38:51 JST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
DMI not present.
ACPI: RSDP (v000 VIA694 ) @ 0x000f7280
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Kernel command line: root=/dev/hda1 ro
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 750.058 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1494.22 BogoMIPS
Memory: 253288k/262080k available (1069k kernel code, 8404k reserved, 459k data, 96k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 750.0409 MHz.
..... host bus clock speed is 200.0108 MHz.
cpu: 0, clocks: 2000108, slice: 1000054
CPU0<T0:2000096,T1:1000032,D:10,S:1000054,C:2000108>
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
PCI: Disabling Via external APIC routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-0 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3660 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 3660k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 96k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD200BB-00AUA1, ATA DISK drive
hdb: _NEC NR-7700A, ATAPI CD/DVD-ROM drive
blk: queue d0825b80, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(66)
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [2434/255/63] p1 p2 < p5 >
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 771080k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Real Time Clock Driver v1.10f
spurious 8259A interrupt: IRQ7.
hdb: attached ide-cdrom driver.
hdb: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Via Apollo Pro KT133 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: Printer, Canon BJC-1000
parport_pc: Via 686A parallel port: io=0x378
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 11 for device 00:0a.0
eth0: RealTek RTL8139 at 0xec00, 00:e0:4c:10:04:c0, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 21:43:16 Nov 30 2005
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 5 for device 00:07.2
PCI: Sharing IRQ 5 with 00:07.3
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 5 for device 00:07.3
PCI: Sharing IRQ 5 with 00:07.2
usb-uhci.c: USB UHCI at I/O 0xe800, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
lp0: using parport0 (polling).
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
inserting floppy driver for 2.4.27-2-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
|
|
|
|
|
|
|
|
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
Kui seadistasin alsat (alsaconf) , siis viskab ette mõned küsimused:
No supported PnP or PCI card found. Would you like to probe legacy ISA sound card/chip?
( vajutasin yes )
Shall Itry all possible DMA and IRQ combinations? vajutasin yes. Siis ähvardas , et unstable!
Seal oli nimistu helikaartidest - ja oli kaks varjanti sounblasterit 1.6 ja 1.0/2.0 pro ( valisin viimase )
Umbes nii nägi olukord välja aga paraku heli ikka pole
|
|
|
|
|
|
|
|
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
probing legacy cards.....
probing sb8
andis siis alsa installimise tulemusena
|
|
|
|
|
|
|
|
imre
Vana Pingviin
Liitunud: 16.08.2005
Postitused: 2648
Asukoht: Saku kant
Distributsioon: Ubuntu
|
|
Mida näitab sulle käsk: | Kood: | | cat /proc/asound/cards |
|
|
|
|
_________________
Enne teema püstitamist kasutage OTSINGUT
Küsi targalt: Infot siit!
Kui aru ei saa, siis küsi.
|
|
|
|
pacho
Moderaator
Vanus: 43
Liitunud: 08.07.2005
Postitused: 618
Distributsioon: Debian GNU/Linux
|
|
Kas sul on mingi ületamatu vajadus 2.4 kernelit kasutada?
2.6 seerial on mitmeid eeliseid. Näiteks udev, dbus, alsa jne .
Heli see suure tõenäosusega korda ei tee aga elu läheb veidike lihtsamaks.
Edit: Proovi helikaarti mõnda teise PCI slotti, soovitatavalt alumisse. Need VIA kiibistikuga emaplaadid tekitasid aeg-ajalt Live!'ga konflikte.
|
|
|
|
_________________
http://blog.pacho.pri.ee/
|
|
|
|
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
| cat /proc/asound/cards - no souncards
|
|
|
|
|
|
|
|
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
Sound server informational message:
Error while initializing the sound driver:
device: default can't be opened for playback (No such device)
The sound server will continue, using the null output device.
Ja selline järjekordne tekst tuleb ette, kui olen - no ma ei te mitu korda kõike proovinud- no täitsa jama!
|
|
|
|
|
|
|
|
pacho
Moderaator
Vanus: 43
Liitunud: 08.07.2005
Postitused: 618
Distributsioon: Debian GNU/Linux
|
|
|
|
heinar
Pingviini kasutaja
Liitunud: 16.02.2006
Postitused: 65
|
|
CPU0
0: 123640 XT-PIC timer
1: 350 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 4 XT-PIC rtc
9: 0 XT-PIC usb-uhci, usb-uhci
11: 20029 XT-PIC eth0
12: 71689 XT-PIC PS/2 Mouse
14: 33001 XT-PIC ide0
NMI: 0
LOC: 123548
ERR: 29
MIS: 0
|
|
|
|
|
|
|
|
pacho
Moderaator
Vanus: 43
Liitunud: 08.07.2005
Postitused: 618
Distributsioon: Debian GNU/Linux
|
|
| dmesg palun ka uuesti. Vahepel tegid vist arvutile algkäivituse. Pmst on vaja mõlema käsu väljundit ilma vahepeal arvutit kinni panemata.
|
|
|
|
_________________
http://blog.pacho.pri.ee/
|
|
|
|
|
|
