| Autor |
Sõnum |
pasta
Pingviini kasutaja
Liitunud: 12.12.2010
Postitused: 56
|
|
Olen nüüd siis ka linuxiga proovimas ja peab ütlema, et installimine oli küll jäle lihtne, a vot selle wifi-ga olen nüüd hädas ja nagu ma peale pisikest otsingut jõudsin asja sisse, kus räägiti käsuridadest: lspci ja ifconfig, siis pusisin need ka kuidagi järele ja sain tulemuseks:
lspci
00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller
00:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:02.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller
00:03.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller
00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
00:13.0 PCI bridge: VIA Technologies, Inc. VT8237A Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. VT8237A PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 01)
04:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) (rev 10)
ifconfig
eth0 Link encap:Ethernet HWaddr 00:a0:d1:c7:49:d6
inet aadress:192.168.0.6 bcast:192.168.0.255 mask:255.255.255.0
inet6 aadr: fe80::2a0:d1ff:fec7:49d6/64 skoop:ühendus
UP BROADCAST RUNNING MULTICAST MTU:1492 meetrika:1
RX pakette:4254 vigu:0 ära visatud:0 ületäit:0 kaadri vigu:0
TX pakette:4034 vigu:0 ära visatud:0 ületäit:0 carrier:0
kollisioone:0 txqueuelen:1000
RX baite:4053675 (4.0 MB) TX baite:553824 (553.8 KB)
katkestus:23 baasaadress:0x6400
lo Link encap:Kohalik loopback
inet aadress:127.0.0.1 mask:255.0.0.0
inet6 aadr: ::1/128 skoop:host
UP LOOPBACK RUNNING MTU:16436 meetrika:1
RX pakette:40 vigu:0 ära visatud:0 ületäit:0 kaadri vigu:0
TX pakette:40 vigu:0 ära visatud:0 ületäit:0 carrier:0
kollisioone:0 txqueuelen:0
RX baite:2000 (2.0 KB) TX baite:2000 (2.0 KB)
no vat , selle teadmise lükkan nüüd teie ette, et saaksite mind nüüd õpetama ja siunama hakata....
|
|
|
|
|
|
|
  |
Kaar3l
Vana Pingviin
Vanus: 36
Liitunud: 07.05.2007
Postitused: 692
Asukoht: Plv
Distributsioon: Ubuntu
|
|
| Siin pole ühtegi märki wifi adapteritest. Paluks lsusb väljundit ja dmesg.
|
|
|
|
_________________
Hyva päiva!
|
|
|
|
pasta
Pingviini kasutaja
Liitunud: 12.12.2010
Postitused: 56
|
|
trampisin aga lsusb ja dmesg sissse ja tulemuseks:
lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0bf8:100f Fujitsu Siemens Computers
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-26-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #48-Ubuntu SMP Wed Nov 24 09:00:03 UTC 2010 (Ubuntu 2.6.32-26.48-generic 2.6.32.24+drm33.11)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000037e90000 (usable)
[ 0.000000] BIOS-e820: 0000000037e90000 - 0000000037e97000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000037e97000 - 0000000037f00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x37e90 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0038000000 mask FFF8000000 uncachable
[ 0.000000] 2 base 00D0000000 mask FFF8000000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009dc00 (usable)
[ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000037e90000 (usable)
[ 0.000000] modified: 0000000037e90000 - 0000000037e97000 (ACPI data)
[ 0.000000] modified: 0000000037e97000 - 0000000037f00000 (ACPI NVS)
[ 0.000000] modified: 0000000037f00000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fffe0000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 29750000 - 29f2bd49
[ 0.000000] ACPI: RSDP 000f85c0 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 37e92d16 00038 (v01 FSC PC 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 37e96c32 00074 (v01 AMDK8 PTLTW 06040000 PTL_ 000F4240)
[ 0.000000] ACPI: DSDT 37e92d4e 03EE4 (v01 IEC___ E25_____ 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 37e97fc0 00040
[ 0.000000] ACPI: SLIC 37e96ca6 00176 (v01 FSC PC 06040000 PTL_ 00000000)
[ 0.000000] ACPI: APIC 37e96e1c 00066 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 37e96e82 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 37e96ebe 00142 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 6MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008dced8] TEXT DATA BSS ==> [0000100000 - 00008dced8]
[ 0.000000] #4 [0029750000 - 0029f2bd49] RAMDISK ==> [0029750000 - 0029f2bd49]
[ 0.000000] #5 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #6 [00008dd000 - 00008e0138] BRK ==> [00008dd000 - 00008e0138]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f8680] f8680
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x00037e90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00037e90
[ 0.000000] On node 0 totalpages: 228905
[ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map c1001000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3961 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 14 pages used for memmap
[ 0.000000] HighMem zone: 1668 pages, LIFO batch:0
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36056 r0 d21288 u4194304
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227115
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-26-generic root=UUID=6ec06286-b6ab-4145-b708-83f74d83f339 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4580160 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:00037e90)
[ 0.000000] Memory: 886536k/916032k available (4682k kernel code, 28660k reserved, 2121k data, 656k init, 6728k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kB)
[ 0.000000] .data : 0xc0592847 - 0xc07a4e68 (2121 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0592847 (4682 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2000.372 MHz processor.
[ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.74 BogoMIPS (lpj=8001488)
[ 0.008021] Security Framework initialized
[ 0.008042] AppArmor: AppArmor initialized
[ 0.008049] Mount-cache hash table entries: 512
[ 0.008159] Initializing cgroup subsys ns
[ 0.008163] Initializing cgroup subsys cpuacct
[ 0.008167] Initializing cgroup subsys memory
[ 0.008176] Initializing cgroup subsys devices
[ 0.008178] Initializing cgroup subsys freezer
[ 0.008181] Initializing cgroup subsys net_cls
[ 0.008198] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008201] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.008205] mce: CPU supports 5 MCE banks
[ 0.008215] using C1E aware idle routine
[ 0.008222] Performance Events: AMD PMU driver.
[ 0.008228] ... version: 0
[ 0.008230] ... bit width: 48
[ 0.008232] ... generic registers: 4
[ 0.008234] ... value mask: 0000ffffffffffff
[ 0.008237] ... max period: 00007fffffffffff
[ 0.008239] ... fixed-purpose events: 0
[ 0.008241] ... event mask: 000000000000000f
[ 0.008245] Checking 'hlt' instruction... OK.
[ 0.024661] SMP alternatives: switching to UP code
[ 0.030916] Freeing SMP alternatives: 19k freed
[ 0.030936] ACPI: Core revision 20090903
[ 0.039486] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.039492] ftrace: allocating 21794 entries in 43 pages
[ 0.040098] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.040975] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.082825] CPU0: Mobile AMD Sempron(tm) Processor 3600+ stepping 02
[ 0.084001] Brought up 1 CPUs
[ 0.084001] Total of 1 processors activated (4000.74 BogoMIPS).
[ 0.084001] CPU0 attaching NULL sched-domain.
[ 0.084001] devtmpfs: initialized
[ 0.084001] regulator: core version 0.5
[ 0.084001] Time: 10:09:34 Date: 12/12/10
[ 0.084001] NET: Registered protocol family 16
[ 0.084001] EISA bus registered
[ 0.084001] ACPI: bus type pci registered
[ 0.084001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4
[ 0.084001] PCI: MCFG area at e0000000 reserved in E820
[ 0.084001] PCI: Using MMCONFIG for extended config space
[ 0.084001] PCI: Using configuration type 1 for base access
[ 0.084001] bio: create slab <bio-0> at 0
[ 0.084001] ACPI: EC: Look up EC in DSDT
[ 0.292260] ACPI: Interpreter enabled
[ 0.292260] ACPI: (supports S0 S3 S4 S5)
[ 0.292260] ACPI: Using IOAPIC for interrupt routing
[ 0.299205] ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62
[ 0.299250] ACPI: Power Resource [FAN0] (off)
[ 0.299277] ACPI: Power Resource [FAN1] (off)
[ 0.299437] ACPI: No dock devices found.
[ 0.299540] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.299600] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.300040] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.300045] pci 0000:00:02.0: PME# disabled
[ 0.300112] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.300117] pci 0000:00:03.0: PME# disabled
[ 0.300169] pci 0000:00:0f.0: reg 10 io port: [0x4cb0-0x4cb7]
[ 0.300175] pci 0000:00:0f.0: reg 14 io port: [0x4ca4-0x4ca7]
[ 0.300182] pci 0000:00:0f.0: reg 18 io port: [0x4ca8-0x4caf]
[ 0.300189] pci 0000:00:0f.0: reg 1c io port: [0x4ca0-0x4ca3]
[ 0.300196] pci 0000:00:0f.0: reg 20 io port: [0x4c80-0x4c8f]
[ 0.300202] pci 0000:00:0f.0: reg 24 io port: [0x4400-0x44ff]
[ 0.300269] pci 0000:00:0f.1: reg 20 io port: [0x4c90-0x4c9f]
[ 0.300345] pci 0000:00:10.0: reg 20 io port: [0x4c00-0x4c1f]
[ 0.300369] pci 0000:00:10.0: supports D1 D2
[ 0.300371] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.300375] pci 0000:00:10.0: PME# disabled
[ 0.300420] pci 0000:00:10.1: reg 20 io port: [0x4c20-0x4c3f]
[ 0.300444] pci 0000:00:10.1: supports D1 D2
[ 0.300447] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.300451] pci 0000:00:10.1: PME# disabled
[ 0.300496] pci 0000:00:10.2: reg 20 io port: [0x4c40-0x4c5f]
[ 0.300520] pci 0000:00:10.2: supports D1 D2
[ 0.300523] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.300527] pci 0000:00:10.2: PME# disabled
[ 0.300572] pci 0000:00:10.3: reg 20 io port: [0x4c60-0x4c7f]
[ 0.300596] pci 0000:00:10.3: supports D1 D2
[ 0.300598] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.300602] pci 0000:00:10.3: PME# disabled
[ 0.300632] pci 0000:00:10.4: reg 10 32bit mmio: [0xd9300000-0xd93000ff]
[ 0.300672] pci 0000:00:10.4: supports D1 D2
[ 0.300674] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.300678] pci 0000:00:10.4: PME# disabled
[ 0.300834] pci 0000:00:12.0: reg 10 io port: [0x4800-0x48ff]
[ 0.300841] pci 0000:00:12.0: reg 14 32bit mmio: [0xd9300400-0xd93004ff]
[ 0.300878] pci 0000:00:12.0: supports D1 D2
[ 0.300880] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.300885] pci 0000:00:12.0: PME# disabled
[ 0.301109] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.301116] pci 0000:01:00.0: reg 14 32bit mmio: [0xd8000000-0xd8ffffff]
[ 0.301134] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.301152] pci 0000:01:00.0: supports D1 D2
[ 0.301189] pci 0000:00:01.0: bridge 32bit mmio: [0xd8000000-0xd8ffffff]
[ 0.301194] pci 0000:00:01.0: bridge 32bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.301322] pci 0000:04:01.0: reg 10 64bit mmio: [0xd9000000-0xd9003fff]
[ 0.301359] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
[ 0.301363] pci 0000:04:01.0: PME# disabled
[ 0.301407] pci 0000:00:13.0: bridge 32bit mmio: [0xd9000000-0xd90fffff]
[ 0.301451] pci 0000:00:13.1: transparent bridge
[ 0.301479] pci_bus 0000:00: on NUMA node 0
[ 0.301482] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.301671] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT]
[ 0.311869] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
[ 0.311948] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled.
[ 0.312036] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *7, disabled.
[ 0.312109] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled.
[ 0.312210] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 9 *10 11 12)
[ 0.312309] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 9 10 *11 12)
[ 0.312404] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 9 10 11 12) *7
[ 0.312487] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 9 10 11 12) *0, disabled.
[ 0.312570] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 9 10 11 12) *0, disabled.
[ 0.312653] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 9 10 11 12) *0, disabled.
[ 0.312738] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 9 10 11 12) *0, disabled.
[ 0.312836] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 9 10 11 12)
[ 0.312955] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.312958] vgaarb: loaded
[ 0.313081] SCSI subsystem initialized
[ 0.313157] libata version 3.00 loaded.
[ 0.313243] usbcore: registered new interface driver usbfs
[ 0.313255] usbcore: registered new interface driver hub
[ 0.313280] usbcore: registered new device driver usb
[ 0.313401] ACPI: WMI: Mapper loaded
[ 0.313404] PCI: Using ACPI for IRQ routing
[ 0.313577] NetLabel: Initializing
[ 0.313579] NetLabel: domain hash size = 128
[ 0.313580] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.313594] NetLabel: unlabeled traffic allowed by default
[ 0.313653] Switching to clocksource tsc
[ 0.315402] AppArmor: AppArmor Filesystem Enabled
[ 0.315423] pnp: PnP ACPI init
[ 0.315441] ACPI: bus type pnp registered
[ 0.315552] pnp: PnP ACPI: found 9 devices
[ 0.315552] ACPI: ACPI bus type pnp unregistered
[ 0.315552] PnPBIOS: Disabled by ACPI PNP
[ 0.315552] system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.315552] system 00:05: iomem range 0xffee0000-0xffefffff has been reserved
[ 0.315552] system 00:05: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.315552] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.315552] system 00:05: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.315552] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.315552] system 00:06: ioport range 0x200-0x20f has been reserved
[ 0.315552] system 00:06: ioport range 0x400-0x40f has been reserved
[ 0.315552] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[ 0.315552] system 00:06: ioport range 0x4000-0x407f has been reserved
[ 0.315552] system 00:06: ioport range 0x4100-0x411f has been reserved
[ 0.350206] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
[ 0.350210] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.350212] pci 0000:00:01.0: IO window: disabled
[ 0.350217] pci 0000:00:01.0: MEM window: 0xd8000000-0xd8ffffff
[ 0.350222] pci 0000:00:01.0: PREFETCH window: 0xc0000000-0xcfffffff
[ 0.350228] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.350231] pci 0000:00:02.0: IO window: 0x1000-0x1fff
[ 0.350236] pci 0000:00:02.0: MEM window: 0x40000000-0x401fffff
[ 0.350240] pci 0000:00:02.0: PREFETCH window: 0x00000040200000-0x000000403fffff
[ 0.350247] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03
[ 0.350250] pci 0000:00:03.0: IO window: 0x2000-0x2fff
[ 0.350256] pci 0000:00:03.0: MEM window: 0x40400000-0x405fffff
[ 0.350260] pci 0000:00:03.0: PREFETCH window: 0x00000040600000-0x000000407fffff
[ 0.350267] pci 0000:00:13.0: PCI bridge, secondary bus 0000:04
[ 0.350269] pci 0000:00:13.0: IO window: disabled
[ 0.350274] pci 0000:00:13.0: MEM window: 0xd9000000-0xd90fffff
[ 0.350278] pci 0000:00:13.0: PREFETCH window: disabled
[ 0.350284] pci 0000:00:13.1: PCI bridge, secondary bus 0000:05
[ 0.350286] pci 0000:00:13.1: IO window: disabled
[ 0.350290] pci 0000:00:13.1: MEM window: disabled
[ 0.350293] pci 0000:00:13.1: PREFETCH window: disabled
[ 0.350324] pci 0000:00:01.0: setting latency timer to 64
[ 0.350333] alloc irq_desc for 27 on node -1
[ 0.350336] alloc kstat_irqs on node -1
[ 0.350341] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 0.350346] pci 0000:00:02.0: setting latency timer to 64
[ 0.350354] alloc irq_desc for 31 on node -1
[ 0.350356] alloc kstat_irqs on node -1
[ 0.350359] pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[ 0.350364] pci 0000:00:03.0: setting latency timer to 64
[ 0.350370] pci 0000:00:13.0: setting latency timer to 64
[ 0.350376] pci 0000:00:13.1: setting latency timer to 64
[ 0.350381] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.350383] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.350387] pci_bus 0000:01: resource 1 mem: [0xd8000000-0xd8ffffff]
[ 0.350390] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.350393] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.350395] pci_bus 0000:02: resource 1 mem: [0x40000000-0x401fffff]
[ 0.350398] pci_bus 0000:02: resource 2 pref mem [0x40200000-0x403fffff]
[ 0.350401] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
[ 0.350404] pci_bus 0000:03: resource 1 mem: [0x40400000-0x405fffff]
[ 0.350407] pci_bus 0000:03: resource 2 pref mem [0x40600000-0x407fffff]
[ 0.350410] pci_bus 0000:04: resource 1 mem: [0xd9000000-0xd90fffff]
[ 0.350413] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.350416] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.350451] NET: Registered protocol family 2
[ 0.350544] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.350896] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.351772] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.352212] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.352215] TCP reno registered
[ 0.352309] NET: Registered protocol family 1
[ 0.352324] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.352336] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.352339] pci 0000:00:02.0: MSI quirk detected; subordinate MSI disabled
[ 0.352431] pci 0000:01:00.0: Boot video device
[ 0.352637] cpufreq-nforce2: No nForce2 chipset.
[ 0.352668] Scanning for low memory corruption every 60 seconds
[ 0.352780] audit: initializing netlink socket (disabled)
[ 0.352794] type=2000 audit(1292148574.350:1): initialized
[ 0.362927] Trying to unpack rootfs image as initramfs...
[ 0.374718] highmem bounce pool size: 64 pages
[ 0.374725] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.382683] VFS: Disk quotas dquot_6.5.2
[ 0.382776] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.383395] fuse init (API version 7.13)
[ 0.383480] msgmni has been set to 1719
[ 0.383680] alg: No test for stdrng (krng)
[ 0.383735] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.383739] io scheduler noop registered
[ 0.383741] io scheduler anticipatory registered
[ 0.383743] io scheduler deadline registered
[ 0.383786] io scheduler cfq registered (default)
[ 0.383937] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.384050] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.384145] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.384202] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.384763] ACPI: AC Adapter [ADP0] (on-line)
[ 0.384837] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.384842] ACPI: Power Button [PWRB]
[ 0.384883] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.384886] ACPI: Sleep Button [SLPB]
[ 0.384930] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.384960] ACPI: Lid Switch [LID]
[ 0.385012] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.385015] ACPI: Power Button [PWRF]
[ 0.385093] fan PNP0C0B:00: registered as cooling_device0
[ 0.385102] ACPI: Fan [FND0] (off)
[ 0.385152] fan PNP0C0B:01: registered as cooling_device1
[ 0.385157] ACPI: Fan [FND1] (off)
[ 0.385380] processor LNXCPU:00: registered as cooling_device2
[ 0.388700] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.388710] ACPI: Thermal Zone [THRM] (29 C)
[ 0.394569] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.395822] brd: module loaded
[ 0.396279] loop: module loaded
[ 0.396376] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.396543] alloc irq_desc for 21 on node -1
[ 0.396545] alloc kstat_irqs on node -1
[ 0.396553] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.396609] pata_acpi 0000:00:0f.0: PCI INT B disabled
[ 0.396676] pata_acpi 0000:00:0f.1: power state changed by ACPI to D0
[ 0.396701] pata_acpi 0000:00:0f.1: power state changed by ACPI to D0
[ 0.397042] Fixed MDIO Bus: probed
[ 0.397081] PPP generic driver version 2.4.2
[ 0.397129] tun: Universal TUN/TAP device driver, 1.6
[ 0.397132] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.397207] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.397225] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.397242] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 0.397278] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 0.397338] ehci_hcd 0000:00:10.4: irq 21, io mem 0xd9300000
[ 0.397455] isapnp: Scanning for PnP cards...
[ 0.403008] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.406456] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 0.406597] usb usb1: configuration #1 chosen from 1 choice
[ 0.406627] hub 1-0:1.0: USB hub found
[ 0.406638] hub 1-0:1.0: 8 ports detected
[ 0.406707] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.406725] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.406774] alloc irq_desc for 20 on node -1
[ 0.406776] alloc kstat_irqs on node -1
[ 0.406783] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.406792] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 0.406829] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.406878] uhci_hcd 0000:00:10.0: irq 20, io base 0x00004c00
[ 0.406966] usb usb2: configuration #1 chosen from 1 choice
[ 0.406989] hub 2-0:1.0: USB hub found
[ 0.406997] hub 2-0:1.0: 2 ports detected
[ 0.407038] alloc irq_desc for 22 on node -1
[ 0.407040] alloc kstat_irqs on node -1
[ 0.407044] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 0.407053] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 0.407084] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 0.407125] uhci_hcd 0000:00:10.1: irq 22, io base 0x00004c20
[ 0.407207] usb usb3: configuration #1 chosen from 1 choice
[ 0.407229] hub 3-0:1.0: USB hub found
[ 0.407237] hub 3-0:1.0: 2 ports detected
[ 0.407277] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.407282] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 0.407314] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 0.407334] uhci_hcd 0000:00:10.2: irq 21, io base 0x00004c40
[ 0.407429] usb usb4: configuration #1 chosen from 1 choice
[ 0.407453] hub 4-0:1.0: USB hub found
[ 0.407459] hub 4-0:1.0: 2 ports detected
[ 0.407500] alloc irq_desc for 23 on node -1
[ 0.407503] alloc kstat_irqs on node -1
[ 0.407507] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.407515] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 0.407545] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 0.407587] uhci_hcd 0000:00:10.3: irq 23, io base 0x00004c60
[ 0.407671] usb usb5: configuration #1 chosen from 1 choice
[ 0.407698] hub 5-0:1.0: USB hub found
[ 0.407705] hub 5-0:1.0: 2 ports detected
[ 0.407789] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.413627] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.465078] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.465092] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.470436] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.470482] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.470508] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.470656] mice: PS/2 mouse device common for all mice
[ 0.470815] rtc_cmos 00:02: RTC can wake from S4
[ 0.470860] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.470909] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.471034] device-mapper: uevent: version 1.0.3
[ 0.471148] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.473932] device-mapper: multipath: version 1.1.0 loaded
[ 0.473937] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.474128] EISA: Probing bus 0 at eisa.0
[ 0.474137] Cannot allocate resource for EISA slot 1
[ 0.474139] Cannot allocate resource for EISA slot 2
[ 0.474145] Cannot allocate resource for EISA slot 4
[ 0.474165] EISA: Detected 0 cards.
[ 0.478372] cpuidle: using governor ladder
[ 0.478375] cpuidle: using governor menu
[ 0.478833] TCP cubic registered
[ 0.478990] NET: Registered protocol family 10
[ 0.479461] lo: Disabled Privacy Extensions
[ 0.479804] NET: Registered protocol family 17
[ 0.479842] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3600+ processors (1 cpu cores) (version 2.20.00)
[ 0.480467] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x10
[ 0.480470] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12
[ 0.480472] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14
[ 0.480475] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x18
[ 0.480527] Using IPI No-Shortcut mode
[ 0.480634] PM: Resume from disk failed.
[ 0.480649] registered taskstats version 1
[ 0.481003] Magic number: 6:613:173
[ 0.481101] rtc_cmos 00:02: setting system clock to 2010-12-12 10:09:34 UTC (1292148574)
[ 0.481104] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.481106] EDD information not available.
[ 0.506728] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.837374] Freeing initrd memory: 8047k freed
[ 0.886993] usb 1-5: new high speed USB device using ehci_hcd and address 3
[ 0.974033] isapnp: No Plug & Play device found
[ 0.974045] Freeing unused kernel memory: 656k freed
[ 0.974622] Write protecting the kernel text: 4684k
[ 0.974653] Write protecting the kernel read-only data: 1840k
[ 0.996169] udev: starting version 151
[ 1.049995] md: linear personality registered for level -1
[ 1.062730] usb 1-5: configuration #1 chosen from 1 choice
[ 1.155376] md: multipath personality registered for level -4
[ 1.178189] sata_via 0000:00:0f.0: version 2.4
[ 1.178203] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.178242] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 1.206024] scsi0 : sata_via
[ 1.215789] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 1.223449] scsi1 : sata_via
[ 1.223510] ata1: SATA max UDMA/133 cmd 0x4cb0 ctl 0x4ca4 bmdma 0x4c80 irq 21
[ 1.223513] ata2: SATA max UDMA/133 cmd 0x4ca8 ctl 0x4ca0 bmdma 0x4c88 irq 21
[ 1.223570] pata_via 0000:00:0f.1: version 0.3.4
[ 1.223628] pata_via 0000:00:0f.1: power state changed by ACPI to D0
[ 1.223655] pata_via 0000:00:0f.1: power state changed by ACPI to D0
[ 1.225978] md: raid0 personality registered for level 0
[ 1.228763] scsi2 : pata_via
[ 1.234876] scsi3 : pata_via
[ 1.235600] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4c90 irq 14
[ 1.235603] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4c98 irq 15
[ 1.235814] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.244521] eth0: VIA Rhine II at 0xd9300400, 00:a0:d1:c7:49:d6, IRQ 23.
[ 1.245231] eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
[ 1.304013] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 1.424008] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.480876] usb 2-1: configuration #1 chosen from 1 choice
[ 1.636618] ata1.00: ATA-8: WDC WD1200BEVS-22UST0, 01.01A01, max UDMA/133
[ 1.636623] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.653183] ata1.00: configured for UDMA/133
[ 1.653304] scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-2 01.0 PQ: 0 ANSI: 5
[ 1.653469] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.653740] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.653786] sd 0:0:0:0: [sda] Write Protect is off
[ 1.653789] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.653812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.653950] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 1.698685] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.856019] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.028393] ata4.00: ATAPI: Optiarc DVD RW AD-7540A, 1.42, max UDMA/33
[ 2.044285] ata4.00: configured for UDMA/33
[ 2.045442] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7540A 1.42 PQ: 0 ANSI: 5
[ 2.048167] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.048171] Uniform CD-ROM driver Revision: 3.20
[ 2.048429] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.048554] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.059238] usbcore: registered new interface driver hiddev
[ 2.070323] md: raid1 personality registered for level 1
[ 2.072057] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input6
[ 2.072164] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-1/input0
[ 2.072191] usbcore: registered new interface driver usbhid
[ 2.072194] usbhid: v2.6:USB HID core driver
[ 2.076321] async_tx: api initialized (async)
[ 2.077580] xor: automatically using best checksumming function: pIII_sse
[ 2.096005] pIII_sse : 5960.000 MB/sec
[ 2.096007] xor: using function: pIII_sse (5960.000 MB/sec)
[ 2.164043] raid6: int32x1 905 MB/s
[ 2.232004] raid6: int32x2 889 MB/s
[ 2.300104] raid6: int32x4 555 MB/s
[ 2.368034] raid6: int32x8 419 MB/s
[ 2.436014] raid6: mmxx1 1624 MB/s
[ 2.504011] raid6: mmxx2 2964 MB/s
[ 2.572007] raid6: sse1x1 1617 MB/s
[ 2.640011] raid6: sse1x2 2666 MB/s
[ 2.708011] raid6: sse2x1 2774 MB/s
[ 2.776004] raid6: sse2x2 3649 MB/s
[ 2.776006] raid6: using algorithm sse2x2 (3649 MB/s)
[ 2.783420] md: raid6 personality registered for level 6
[ 2.783423] md: raid5 personality registered for level 5
[ 2.783426] md: raid4 personality registered for level 4
[ 2.791516] md: raid10 personality registered for level 10
[ 3.233325] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 17.244158] udev: starting version 151
[ 17.300656] Adding 494584k swap on /dev/sda7. Priority:-1 extents:1 across:494584k
[ 17.354642] lp: driver loaded but no devices found
[ 17.555908] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 17.560587] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.560795] Linux agpgart interface v0.103
[ 17.563735] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0336]
[ 17.727532] vga16fb: initializing
[ 17.727538] vga16fb: mapped to 0xc00a0000
[ 17.727605] fb0: VGA16 VGA frame buffer device
[ 17.729867] ACPI Warning: _BQC returned an invalid level (20090903/video-631)
[ 17.730055] acpi device:15: registered as cooling_device3
[ 17.730152] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:13/LNXVIDEO:00/input/input7
[ 17.730207] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 17.770832] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 17.959065] type=1505 audit(1292141391.974:2): operation="profile_load" pid=599 name="/sbin/dhclient3"
[ 17.959351] type=1505 audit(1292141391.974:3): operation="profile_load" pid=599 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 17.959512] type=1505 audit(1292141391.974:4): operation="profile_load" pid=599 name="/usr/lib/connman/scripts/dhclient-script"
[ 18.224683] alloc irq_desc for 17 on node -1
[ 18.224686] alloc kstat_irqs on node -1
[ 18.224694] HDA Intel 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 18.224747] HDA Intel 0000:04:01.0: setting latency timer to 64
[ 18.224751] HDA Intel 0000:04:01.0: PCI: Disallowing DAC for device
[ 18.282859] Console: switching to colour frame buffer device 80x30
[ 18.423882] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04753/0x200000
[ 18.463420] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 18.754617] type=1505 audit(1292141392.770:5): operation="profile_replace" pid=780 name="/sbin/dhclient3"
[ 18.754911] type=1505 audit(1292141392.770:6): operation="profile_replace" pid=780 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 18.755078] type=1505 audit(1292141392.770:7): operation="profile_replace" pid=780 name="/usr/lib/connman/scripts/dhclient-script"
[ 18.762726] type=1505 audit(1292141392.778: : operation="profile_load" pid=782 name="/usr/lib/cups/backend/cups-pdf"
[ 18.763090] type=1505 audit(1292141392.778:9): operation="profile_load" pid=782 name="/usr/sbin/cupsd"
[ 18.768691] type=1505 audit(1292141392.786:10): operation="profile_load" pid=783 name="/usr/sbin/mysqld-akonadi"
[ 18.782126] eth0: link down
[ 18.782362] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.784640] type=1505 audit(1292141392.802:11): operation="profile_load" pid=784 name="/usr/sbin/tcpdump"
[ 19.221792] ppdev: user-space parallel port driver
[ 19.703400] [drm] Initialized drm 1.1.0 20060810
[ 19.709470] pci 0000:01:00.0: power state changed by ACPI to D0
[ 19.709490] pci 0000:01:00.0: power state changed by ACPI to D0
[ 19.709500] alloc irq_desc for 16 on node -1
[ 19.709503] alloc kstat_irqs on node -1
[ 19.709510] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 19.710747] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
[ 19.713101] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[ 19.713123] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 19.713221] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[ 28.373308] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 28.400193] Marking TSC unstable due to cpufreq changes
[ 28.400279] Switching to clocksource acpi_pm
[ 42.477071] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 179.710735] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 179.711292] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 190.600023] eth0: no IPv6 routers present
panin estobuntu windowsi kõrvale ja windowsi all töötab wifi ilusti ja arvuti küljes olev wifi sisselülitatust näitav tuluke ka põleb...
|
|
|
|
|
|
|
|
madisv
Pingviini aktivist
Vanus: 42
Liitunud: 08.09.2008
Postitused: 119
Asukoht: Tallinn
Distributsioon: muutub tihti, UbuntuMintiDebian'i t
|
|
| Mis ta sul Windowsi device manageris Wifi kaardi margiks ja tootjaks ütleb?
|
|
|
|
|
|
|
 |
pasta
Pingviini kasutaja
Liitunud: 12.12.2010
Postitused: 56
|
|
| Fujitsu Siemens Computers WLAN 802.11b/g(SiS163u)
|
|
|
|
|
|
|
|
hr.john
Pingviini aktivist
Liitunud: 12.06.2006
Postitused: 181
Asukoht: Eesti
|
|
|
|
artzp
Pingviini kasutaja
Liitunud: 01.11.2010
Postitused: 99
Distributsioon: Mint, LinuxMintDebian, PClinuxos
|
|
Proovi selle järgi :
http://uprize.no/?q=node/1
See on küll tekstipõhine, kuid saad aimu mis pakette on vaja. Apt-get install installeerib paketi. Postituses peaks olema ka link, kust leiad enda arvutile selle wireless driveri kui juhuslikult driveri plaat puudub.
Kui kardad terminali kallale ronida :Ava Kpackage manager. http://juhend.estobuntu.org/10.09/tarkvara.html
Tõmma endale sellega programm ndiswrapper , võid otsida veel sõna järgi windows wireless drivers. Ja paigalda.
Ava see programm (windows wireless drivers või ndiswrapper) - ja siis saad valida windows XP wireless driver ( .inf failiga tegu). Driver peab olema just 32 bitine ja Windows XP oma.
Peale peaksid tööle saama wifi.
|
|
|
|
|
|
|
|
pasta
Pingviini kasutaja
Liitunud: 12.12.2010
Postitused: 56
|
|
Äitähh abi eest siis! Peris teie juhendite järgi ei õnnestunud , a sealt hakkas pall veerema, ma nii huvi pärast küsin mismoodi seda ndiswrapper-i programmi avamaine käima pidi, kas seda saab ainult terminalis avada ja siis targalt käskida või on muid võimalusi ka, ma nagu programmide nimistus ei näinud seda...
Panen siia siis lingi kuhu lõpuks välja jõudsin ja mille tulemusena wifi tööle sain: https://help.ubuntu.com/community/WifiDocs/Device/Pentagram_Hornet_USB_Lite 
eks muid hädasid postitan muudes teemades, ei ma neist pääse...
|
|
|
|
|
|
|
|
artzp
Pingviini kasutaja
Liitunud: 01.11.2010
Postitused: 99
Distributsioon: Mint, LinuxMintDebian, PClinuxos
|
|
Ndiswrapperile on graafiline kasujaliides tegelikult.
Peale õigete pakettide installeerimist peaks ilmuma menüüsse shortcut: Windows Wireless drivers, peaks olema settingute all
- see shortcut annab käsu - su-to-root -X -c "/usr/sbin/ndisgtk"
Aga tore kui muud moodi käima said. Gnome keskkonnas (tavalisel Estobuntul on KDE 4.4+ mitte gnome) on seda paketti suhteliselt lihtne leida software centerist.
http://sjsarette.blogspot.com/2009/12/package-manager-roundup.html - seal ka väiksed õpetused erinevatest paketihaldamis programmidest, algajale on kõige lihtsam mu arvates ubuntu software center. Pane peale ja teed endal elu lihtsamaks- leiad kergemini soovitatavat tarkvara. Mõni võibolla soovitab seda mitte tõmmata, kuna see tähendab ka lisamahtu operatsioonisüsteemile.
PS! ei soovita lehel olevaid pakette tõmmata, kuna need on vanad, vaid kasuta kpackage manageri.
|
|
|
|
|
|
|
|
sadiini
Vana Pingviin
Vanus: 53
Liitunud: 28.12.2007
Postitused: 1456
Asukoht: Otsige mind kolmandalt planeedilt...
Distributsioon: Lubuntu, Bodhi, Feren OS
|
|
Olemas on ka graafiline liides winwifi draiveritega majandamiseks.
ndisgtk on paki nimi. Elab pakihalduris.
Kui tulevikus vaja peaks minema...
Edit: 4 min enne tuli ilus põhjalik vastus. Moraal: tuleb kiiremini trükkida.
|
|
|
|
_________________
Hea tarkvara kuulab kasutaja sõna 
|
|
|
|
pasta
Pingviini kasutaja
Liitunud: 12.12.2010
Postitused: 56
|
|
peab muidugi mainima, et peris ei ole korras veel, ilmselt ei oska ja tegin miskit valesti, ühesõnaga, peale restarti pole jällegi wifit ja saan tööle terminalis käsuga: sudo modprobe ndiswrapper ...
kui nüüd vaatasin seda kohta kus seda nodi sisse copysin siis on ilmselt viga selles:
user@ubuntu:~$ sudo modprobe ndiswrapper
user@ubuntu:~$ gksudo gedit /etc/modules
We add at the end of the file: ndiswrapper Save and Reboot. Nextly you have to configure your network. To enable WPA support you must to install wpa_supplicant by command:
et kas too save ja kuhu kohta ja mis nimega? Või on miski muu kamm? 
kuskohas see pakihaldur veel on, ma nagu küll ei leia... 
siin on muidugi teine teema, aga miskii huvitav kotermann, tundub nagu ebaloogiline, nimelt firefoxis videodel puudub heli, vlc-l ja sel teisel mängijal puudub heli ja samas amarok-i puhul heli täitsa olemas ja seal seadete all heli kohal ka kaks vidinat, kus all lisaks nupuke, et proovi kas töötab ja mõlemad töötavad,- väga segane värk...
|
|
|
|
|
|
|
|
sadiini
Vana Pingviin
Vanus: 53
Liitunud: 28.12.2007
Postitused: 1456
Asukoht: Otsige mind kolmandalt planeedilt...
Distributsioon: Lubuntu, Bodhi, Feren OS
|
|
| pasta kirjutas: | peab muidugi mainima, et peris ei ole korras veel, ilmselt ei oska ja tegin miskit valesti, ühesõnaga, peale restarti pole jällegi wifit ja saan tööle terminalis käsuga: sudo modprobe ndiswrapper ...
kui nüüd vaatasin seda kohta kus seda nodi sisse copysin siis on ilmselt viga selles:
user@ubuntu:~$ sudo modprobe ndiswrapper
user@ubuntu:~$ gksudo gedit /etc/modules
We add at the end of the file: ndiswrapper Save and Reboot. Nextly you have to configure your network. To enable WPA support you must to install wpa_supplicant by command:
et kas too save ja kuhu kohta ja mis nimega? Või on miski muu kamm?
kuskohas see pakihaldur veel on, ma nagu küll ei leia...
siin on muidugi teine teema, aga miskii huvitav kotermann, tundub nagu ebaloogiline, nimelt firefoxis videodel puudub heli, vlc-l ja sel teisel mängijal puudub heli ja samas amarok-i puhul heli täitsa olemas ja seal seadete all heli kohal ka kaks vidinat, kus all lisaks nupuke, et proovi kas töötab ja mõlemad töötavad,- väga segane värk... |
Moodulite faili viimasele tühjale reale kirjutad
, siis salvestad faili ja sulged selle.
Sel juhul laetakse ta koos arvuti käivitamisega automaatselt.
Pakihaldur on näiteks KPackage Manager või kasvõi Ubuntu Software Center. Ükskõik milline graafiline liides, millega saab pakikesi/programme majandada.
Samas võid Konsooli sisestada, et | Kood: | | sudo apt-get install ndisgtk wpasupplicant wpagui |
Siis peaks juba lootus tekkima, et midagi kuhugile ühendada saab.
Heliga on selline lugu, et sul on peotäis koodekseid puudu. Imelik on see, et ta ise sulle nende paigaldamist ei paku.
KDE kasutajad ehk teavad, milliste helirakenduste alla nood koodekid kuuluvad.
Mul ei ole mõtet Gnoomi omi pakkuda.
|
|
|
|
_________________
Hea tarkvara kuulab kasutaja sõna
|
|
|
|
pasta
Pingviini kasutaja
Liitunud: 12.12.2010
Postitused: 56
|
|
| Moodulite faili viimasele tühjale reale kirjutad , -eks ole, ja kus nood moodulite failid veel pesitsevad?
|
|
|
|
|
|
|
|
sadiini
Vana Pingviin
Vanus: 53
Liitunud: 28.12.2007
Postitused: 1456
Asukoht: Otsige mind kolmandalt planeedilt...
Distributsioon: Lubuntu, Bodhi, Feren OS
|
|
| pasta kirjutas: | | Moodulite faili viimasele tühjale reale kirjutad , -eks ole, ja kus nood moodulite failid veel pesitsevad? |
Ok - terminaliseerume 
fail asubki /etc/ kataloogis ja nimi on tal modules.
Avatakse root õigustes käsuga gksu.
Anna käsk
| Kood: | | gksu gedit /etc/modules |
Ja avaneva faili lõppu kirjutadki selle sõnakese, salvestad, sulged ja taaskäivitad arvuti.
Ja kui sul näiteks geditit arvutis ei ole, siis anna käsk | Kood: | | gksu kwrite /etc/modules |
või samuti ka | Kood: | | kdesudo kwrite /etc/modules |
|
|
|
|
_________________
Hea tarkvara kuulab kasutaja sõna
|
|
|
|
artzp
Pingviini kasutaja
Liitunud: 01.11.2010
Postitused: 99
Distributsioon: Mint, LinuxMintDebian, PClinuxos
|
|
| Kood: | | sudo kate /etc/modules |
Graafiliselt paigaldamine käiks.
Aga sadiini andis commandi sulle, teen väikse täienduse ka :
| Kood: | | sudo apt-get install ndisgtk wpasupplicant wpagui software-center |
Kirjuta see sisse, installeerib paketid ära.
Peale seda vajuta alt+F2 ja kirjuta | Kood: | | su-to-root -X -c "/usr/sbin/ndisgtk" |
ja enter. Saad graafiliselt endal määrata ära wifi driveri.
|
|
|
|
|
|
|
|
pasta
Pingviini kasutaja
Liitunud: 12.12.2010
Postitused: 56
|
|
rmas@laptop:~$ gksu gedit /etc/modules
urmas@laptop:~$ gksu kwrite /etc/modules
urmas@laptop:~$ kdesudo kwrite /etc/modules
QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: No such file or directory
QFileSystemWatcher: failed to add paths: /home/urmas/.config/ibus/bus
Bus::open: Can not get ibus-daemon's address.
IBusInputContext::createInputContext: no connection to ibus-daemon
sudo:
ühesõnaga tundub mul pole seda faili, dolphiniga lappasin ka füüsiliselt ja ei leidnud...
|
|
|
|
|
|
|
|
sadiini
Vana Pingviin
Vanus: 53
Liitunud: 28.12.2007
Postitused: 1456
Asukoht: Otsige mind kolmandalt planeedilt...
Distributsioon: Lubuntu, Bodhi, Feren OS
|
|
Kui ei ole, siis teeme.
| Kood: | | sudo kwrite /etc/modules |
Ja kirjutad ja salvestad ja restardid.
No peab olema see fail etc kaustas.
|
|
|
|
_________________
Hea tarkvara kuulab kasutaja sõna
|
|
|
|
artzp
Pingviini kasutaja
Liitunud: 01.11.2010
Postitused: 99
Distributsioon: Mint, LinuxMintDebian, PClinuxos
|
|
| Võibolla sellepärast sul ära ei salvestagi wifit, et sinna faili pole mooduli nime kirjutatud. Proovi neid minu antud commande ja programm (su-to-root -X -c "/usr/sbin/ndisgtk") peaks iseseisvalt paigaldama mooduli.
|
|
|
|
|
|
|
|
sadiini
Vana Pingviin
Vanus: 53
Liitunud: 28.12.2007
Postitused: 1456
Asukoht: Otsige mind kolmandalt planeedilt...
Distributsioon: Lubuntu, Bodhi, Feren OS
|
|
| artzp kirjutas: | | Võibolla sellepärast sul ära ei salvestagi wifit, et sinna faili pole mooduli nime kirjutatud. Proovi neid minu antud commande ja programm (su-to-root -X -c "/usr/sbin/ndisgtk") peaks iseseisvalt paigaldama mooduli. |
ndisgtk on tolle win *.inf faili graafiliseks majandamiseks s.t. õige win draiveri kettalt valimiseks.
ndiswrapper on moodul, mis draiverit majandab ja üles laeb.
ja et ndiswrapper käivituks koos arvutiga, tuleb tema nimi kirjutada modules faili sisse eraldiseisvale reale. Kas viimasele või mitte pole tähtis. Tähtis on ta kirjutada järgnevale reale (mis ongi tavaliselt viimane).
|
|
|
|
_________________
Hea tarkvara kuulab kasutaja sõna
|
|
|
|
pasta
Pingviini kasutaja
Liitunud: 12.12.2010
Postitused: 56
|
|
sudo kate /etc/modules - selle käsu peale hüppas lõpuks miski vidin lahti, kuhu teie lakel loal ja juhatusel kirjutasin viimasle reale tolle ndiswrapperi ja nüüd peale restarti, mille käigus linux kokku jooksis hakkas igatahes too wifi kohe ise taha, oeh...
nii huvi pärast tolle moduli sisu nüüdseks:
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
lp
ndiswrapper
mis too lp on ja mis seal veel peaks olema äkki... ?
mis te targad mehed selle heli kohta arvate?
siin vahepeal näppides suutsin miskitpidi alumise paneeli ära nätsutada, - kõik nood ikoonid ja kell ja muu kamm jooksis vasakule nurka,- lohista kuis tahad , ikka hüppavad vasakule tagasi ja käima lükatud rakendused ei ilmu ka enam alla paneelile, oeh...
|
|
|
|
|
|
|
|
|
|
|
