Vsftpd failiserver? ei saa uploadi tööle

[-IFFI-]

Olen nüüd uue probla või takistuse taga ei leia kohta kus seda vsftpd konfata või ülesse leida FC4-s? Uurisin, et siia nagu ei olegi seda ProFTP toetust või sobib siia mõni pünamütsikese version?

[obundra]

Suure saladuskatte all võin öelda,et linuxis asuvad enamus konfifaile /etc kataloomas,sealhulgas ka vsftpd.conf.Ja millist ProFTPD tuge sa otsid?ProFTPD ja vsftpd on kaks ise asja ning nende konfimine ka veidi erinev.

[-IFFI-]

Nonii, sain selle vsftp käima, aga ma ei leia, ei saa aru kuidas ma seal seda uploadi saan lubada???

Kood: Vali kõik

# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=YES
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
chown_uploads=YES
chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that turning on ascii_download_enable enables malicious remote parties
# to consume your I/O resources, by issuing the command "SIZE /big/file" in
# ASCII mode.
# These ASCII options are split into upload and download because you may wish
# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
# on the client anyway..
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd/chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES

pam_service_name=vsftpd
userlist_enable=YES
#enable for standalone mode
listen=YES
tcp_wrappers=YES

sellele ftp kataloogile andsin chmod 777 ka ära ...kuid upload ei toimi ikka, ütleb, et keelatud....kas peab mingid kasutajad veel määrama kuhugi???
ftp://ftp.iffixportaal.com

[-IFFI-]

UP teema uuesti fookusesse...tean, et selline tegu on karistatav, aga vajan tõesti sellel teemal abi

[spott]

pane see ftp logi siia, mis ta teatab, kui üritad midagi uploadida (kogu jutt alates connectimisest)

[-IFFI-]

Kood: Vali kõik

 SmartFTP v1.5.990.2
    Resolving host name "ftp.iffixportaal.com"
    Connecting to 212.7.4.40 Port: 21
    Connected to ftp.iffixportaal.com.
220 (vsFTPd 2.0.3)
    USER anonymous
331 Please specify the password.
    PASS (hidden)
230 Login successful.
    SYST
215 UNIX Type: L8
    FEAT
211-Features:
 EPRT
 EPSV
 MDTM
 PASV
 REST STREAM
 SIZE
 TVFS
211 End
    PWD
257 "/"
    TYPE I
200 Switching to Binary mode.
    PASV
227 Entering Passive Mode (212,7,4,40,81,164)
    Opening data connection to 212.7.4.40 Port: 20900
    LIST -aL
150 Here comes the directory listing.
226 Directory send OK.
    180 bytes transferred. (5,85 KB/s) (30 ms)
    CWD /pub
250 Directory successfully changed.
    PWD
257 "/pub"
    PASV
227 Entering Passive Mode (212,7,4,40,140,9)
    Opening data connection to 212.7.4.40 Port: 35849
    LIST -aL
    119 bytes transferred. (N/A/s) (0 ms)
150 Here comes the directory listing.
226 Directory send OK.
    Remote file exist check: 'CrackDownloader_2.2.rar'.
    SIZE CrackDownloader_2.2.rar
550 Could not get file size.
    PASV
227 Entering Passive Mode (212,7,4,40,243,60)
    Opening data connection to 212.7.4.40 Port: 62268
    STOR CrackDownloader_2.2.rar
550 Permission denied.
    PASV
227 Entering Passive Mode (212,7,4,40,140,193)
    Opening data connection to 212.7.4.40 Port: 36033
    LIST -aL
    119 bytes transferred. (N/A/s) (0 ms)
150 Here comes the directory listing.
226 Directory send OK.
    Transfer failed.

[obundra]

Kood: Vali kõik

chown_uploads=YES 
chown_username=whoever

Sul on konfis lubatud anonüümse kasutaja poolt upitavate failide omaniku muutmist ja omanikuks on märgitud kasutaja whoever.Kas sul selle nimega kasutaja ka reaalselt süsteemis eksisteerib?Pakun,et mitte ja see võib olla üks põhjus miks asi ei tööta.Kommenteeri need read välja või pane sinna mingi reaalselt eksisteeriv kasutaja ja vaata kas muutub midagi.Turvalisuse huvides tuleks muidugi ka anonüümsed kasutajad mingisse kindlasse kataloogi kinni panna (praegu saavad nad mööda süsteemi ringi kolada ja kirjutamisõiguse oled ka neile andnud),selleks tekita konfi rida

Kood: Vali kõik

anon_root=/var/ftp/pub

kataloogi asemele kirjuta oma süsteemile vastav muidugi.