SUSE Linux Enterprise Server 11 SP1, eelnevalt panin kettad biosis riistvaralisse raid1-e, kasutasin õpetust alljärgnevat:
jõudsin punktini neli ja omaarust sain draiverid näidatud- et usb peal asuvad draiverisd raid1 le, aru ei saanud kas laadis need või mitte. viiendast punktist enam aru ei saanud, et mida tähendab?
-->5) In the text tab type brokenmodules=ahci
mida peaksin tegema edasi?
6. ja 7. punkti täitsin jälle nii nagu kirjas 8. punkti ei kohanud nagu installis lihtsalt ära, masin pärast üles ei tule, ilmselt ei leia raid draivereid ja seega ei näe kettapaari, oskab keegi öelda lihtsalt, mis järjestuses mida peab tegema ehk siis selle õpetuse järgi arusaadavalt, eriti ise sellest õpetusest aru ei saa, pole palju linuxiga kokku kh puutunud. Suured Tänud
Installing SLES11 on RAID
In order to support XEN mode, the system needs to have its Virtualization feature enabled in BIOS as a first step, and XEN software package in the OS needs to be loaded during installation.
1) Create a RAID array using the Intel(R) Embedded Server RAID Technology II RAID BIOS Console.
2) Connect USB floppy drive and insert the floppy disk with RAID driver
3) Boot your system using SLES CD
4) When first screen comes up press F6 key to load a driver and select 'Yes'
5) In the text tab type brokenmodules=ahci
6) Select Installation menu option
7) Press Enter
The following message should be displayed: 'Driver Updates added - LSI MegaRAID Software RAID module'. Press Enter. 9) Proceed with the installation.
10) In the page of Server Base Scenario, decide if you want to install as primary operating system on a Physical Machine, as a virtual guest inside a XEN machine by selecting Virtual Machine, or as a virtualization host that can run other virtual machines with the option XEN Virtualization Host. For XEN installation, choose the third option and proceed with Next.
11) Proceed with the installation.
For XEN installations, also follow these additional steps:
12) When the installation completes, re-boot back to regular (non-virtual) OS.
13) Insert the megasr sles11 ext floppy (megasr-14.00.1203.2010-1-sles11-ext-sp1-x86_64.img, megasr-14.00.1203.2010-1-sles11-ext-sp1-x86.img, megasr-14.00.1203.2010-1-sles11-ext-x86_64.img, or megasr-14.00.1203.2010-1-sles11-ext-x86.img as applicable)
14) Mount this floppy to /mnt
15) Take the xen rpm in this floppy and apply it to the system.
16) Reboot the system - proceed with normal usage
