ATI fglrx draiverid, läbipaistvusefektid ei tööta

Ainult Fedoraga seotud teemad, uudised, küsimused

Moderaator: Moderaatorid

Vasta
PeTzZz
Vana Pingviin
Vana Pingviin
Postitusi: 629
Liitunud: 10.09.2005, 03:00

ATI fglrx draiverid, läbipaistvusefektid ei tööta

Postitus Postitas PeTzZz »

Videokaart on ATI Radeon 9500. Sain ATI fglrx draiverid tööle, kuid kõikjal puudub läbipaistvus, kus vaja. Näiteks akende ülaäärised peaksid olema ümarad teema järgi, kuid näitab kante siiski otsades lisaks; kui ikoone liigutada töölaual või failihalduris, näitab Gnome valget kasti ikooni ümber; akent minimiseerides peaks aken sujuvalt tegumiribale minema, minnes näitab seest läbipaistvate ristkülikute asemel musti kaste; ALT-Tab-i kasutades aknaid vahetades peaks ta näitaba järgemööda vastava akna suuruseid seest läbipaistvaid ristkülikuid, kuid mul ei ole need läbipaistvad, vaid mustad; jne.

Võib-olla oskate midagi soovitada?

xorg.conf:

Kood: Vali kõik

# Xorg configuration created by pyxf86config

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
EndSection

Section "Module"
	Load  "glx"
	Load  "dri"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "ee"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "fglrx"
	Option	    "VideoOverlay" "on"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
	Option	    "VideoOverlay" "on"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "ServerFlags"
	Option "AIGLX" "off"
EndSection

Section "Extensions"
	Option	    "Composite" "Disable"
EndSection
Kasutaja avatar
obundra
Vana Pingviin
Vana Pingviin
Postitusi: 1213
Liitunud: 04.08.2005, 03:00

Postitus Postitas obundra »

Äkki nendest abi

Kood: Vali kõik

Section "Extensions" 
Option       "Composite" "Enable" 
EndSection
või

Kood: Vali kõik

Option "AllowGLXWithComposite" "1"
Option "RenderAccel" "1"
PeTzZz
Vana Pingviin
Vana Pingviin
Postitusi: 629
Liitunud: 10.09.2005, 03:00

Postitus Postitas PeTzZz »

Ei aidanud kahjuks ja composite extensioni lubamine tegelikult ei saagi aidata, sest ATI pakutud draiveritel composite extension hetkel ei tööta.

Fedora Core 5 peal töötas ilusti. xorg.conf seal:

Kood: Vali kõik

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "ee"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "Monitor"

 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
 ### Comment all HorizSync and VertSync values to use DDC:
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Samsung SyncMaster 765MB/715MB/CD175D(P)"
	DisplaySize  320	240
 ### Comment all HorizSync and VertSync values to use DDC:
	HorizSync    30.0 - 85.0
	VertRefresh  50.0 - 160.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "fglrx"
	VendorName  "Videocard vendor"
	BoardName   "ATI Technologies Inc R300 AD [Radeon 9500 Pro]"
	Option	    "VideoOverlay" "on"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection
Selle DRI sektsiooni lisamine ei andnud midagi juurde, kui proovisin. Muu on nagu laaditavate moodulite erinevus. Aga täpselt ei tea, kas ka midagi vajalikku...
PeTzZz
Vana Pingviin
Vana Pingviin
Postitusi: 629
Liitunud: 10.09.2005, 03:00

Postitus Postitas PeTzZz »

Sain nüüd asja korda, kui lisasin xorg.conf-i kõik moodulid, mis FC5-s veel lisaks olid. Ma küll ei tea, mis mille jaoks on ja mis asja ära tegi, aga võib-olla hiljem uurin...

S.t. lisasin moodulid:

Kood: Vali kõik

   Load  "dbe"
   Load  "extmod"
   Load  "fbdevhw"
   Load  "record"
   Load  "freetype"
   Load  "type1"
Vasta