Pingviini veeb

Kood: Vali kõik

# Configuration file for OpenSC
# Example configuration file

# NOTE: All key-value pairs must be terminated by a semicolon.

# Default values for any application
# These can be overridden by an application
# specific configuration block.
reader_drivers=pcsc;
app default {
	# Amount of debug info to print
	#
	# A greater value means more debug info.
	# Default: 0
	#
	debug = 0;

	# The file to which debug output will be written
	#
	# Special values 'stdout' and 'stderr' are recognized.
	# Default: stderr
	#
	# debug_file = /tmp/opensc-debug.log;
	# debug_file = "C:\Documents and Settings\All Users\Documents\opensc-debug.log";

	# PKCS#15 initialization / personalization
	# profiles directory for pkcs15-init.
	# Default: /usr/share/opensc
	#
	# profile_dir = /usr/share/opensc;

	# CT-API module configuration.
	reader_driver ctapi {
		# module /usr/local/towitoko/lib/libtowitoko.so {
			# CT-API ports:
			# 0..3		COM1..4
			# 4		Printer
			# 5		Modem
			# 6..7		LPT1..2
			# ports = 0;
		# }
	}

	# The following section shows definitions for PC/SC readers.
	reader_driver pcsc {
		# This sets the maximum send and receive sizes.
		# Some reader drivers have limitations, so you need
		# to set these values. For usb devices check the
		# properties with lsusb -vv for dwMaxIFSD
		#
		# These values will be used for APDU communication
		# and are used for maximum Lc/Le calculation
		# (will not include CLA, INS, P1, P2 or SW1, SW2).
		#
		# Default: send: 255, recv: 256
		# max_send_size = 255;
		# max_recv_size = 256;
		
		# Connect to reader in exclusive mode.
		# Default: false
		# connect_exclusive = true;
		#
		# Reset the card after disconnect.
		# Default: true
		# connect_reset = false;
		#
		# Reset the card after each transaction.
		# Default: false
		# transaction_reset = true;
		#
		# Enable pinpad if detected (PC/SC v2.0.2 Part 10)
		# Default: true
		# enable_pinpad = false;
		#
		# Use specific pcsc provider.
		# Default: libpcsclite.so.1
		# provider_library = libpcsclite.so.1
	}

	# Options for OpenCT support
	reader_driver openct {
		# Virtual readers to allocate.
		# Default: 2
		# readers = 5;

		# This sets the maximum send and receive sizes.
		# Some reader drivers have limitations, so you need
		# to set these values. For usb devices check the
		# properties with lsusb -vv for dwMaxIFSD
		#
		# max_send_size = 255;
		# max_recv_size = 256;
	};

	# What card drivers to load at start-up
	#
	# A special value of 'internal' will load all
	# statically linked drivers. If an unknown (ie. not
	# internal) driver is supplied, a separate configuration
	# configuration block has to be written for the driver.
	# Default: internal
	# NOTE: When "internal" keyword is used, must be last entry
	#
	# card_drivers = customcos, internal;

	# Card driver configuration blocks.

	# For card drivers loaded from an external shared library/DLL,
	# you need to specify the path name of the module
	#
	# card_driver customcos {
		# The location of the driver library
		# module = /usr/lib/opensc/drivers/card_customcos.so;
	# }

	# Force using specific card driver
	#
	# If this option is present, OpenSC will use the supplied
	# driver with all inserted cards.
	#
	# Default: autodetect
	#
	# force_card_driver = customcos;

	# In addition to the built-in list of known cards in the
	# card driver, you can configure a new card for the driver
	# using the card_atr block. The goal is to centralize
	# everything related to a certain card to card_atr.
	#
	# The supported internal card driver names can be retrieved
	# from the output of:
	# $ opensc-tool --list-drivers

	# Generic format: card_atr <hex encoded ATR (case-sensitive!)>

	# New card entry for the flex card driver
	# card_atr 3b:f0:0d:ca:fe {
		# All parameters for the context are
		# optional unless specified otherwise.

		# Context: global, card driver
		#
		# ATR mask value
		#
		# The mask is logically AND'd with an
		# card ATR prior to comparison with the
		# ATR reference value above. Using mask
		# allows identifying and configuring
		# multiple ATRs as the same card model.
		# atrmask = "ff:ff:ff:ff:ff";

		# Context: card driver
		#
		# Specify used card driver (REQUIRED).
		#
		# When enabled, overrides all possible
		# settings from the card drivers built-in
		# card configuration list.
		# driver = "flex";

		# Set card name for card drivers that allows it.
		# name = "My CryptoFlex card";

		# Card type as an integer value.
		#
		# Depending on card driver, this allows
		# tuning the behaviour of the card driver
		# for your card.
		# type = "2002";

		# Card flags as an hex value.
		# Multiple values are OR'd together.
		#
		# Depending on card driver, this allows
		# fine-tuning the capabilities in
		# the card driver for your card.
		#
		# Optionally, some known parameters
		# can be specified as strings:
		#
		# keygen - On-board key generation capability
		# rng - On-board random number source
		#
		# flags = "keygen", "rng", "0x80000000";

		#
		# Context: PKCS#15 emulation layer
		#
		# When using PKCS#15 emulation, force
		# the emulation driver for specific cards.
		#
		# Required for external drivers, but can
		# be used with built-in drivers, too.
		# pkcs15emu = "custom";

		#
		# Context: reader driver
		#
		# Force protocol selection for specific cards.
		# Known parameters: t0, t1, raw
		# force_protocol = "t0";
	# }

	# PIV cards need an entry similar to this one:
	# card_atr 3B:7D:96:00:00:80:31:80:65:B0:83:11:00:AC:83:00:90:00 {
		# name = "PIV-II";
	 	# driver = "piv";
	# }

	# Estonian ID card and Micardo driver currently play together with T=0
	# only. In theory only the 'cold' ATR should be specified, as T=0 will
	# be the preferred protocol once you boot it up with T=0, but be
	# paranoid.
	card_atr 3b:6e:00:ff:45:73:74:45:49:44:20:76:65:72:20:31:2e:30 {
		force_protocol = t0;
	}
	card_atr 3b:fe:94:00:ff:80:b1:fa:45:1f:03:45:73:74:45:49:44:20:76:65:72:20:31:2e:30:43 {
		force_protocol = t0;
	}

	# D-Trust cards are also based on micardo and need T=0 for some reason
	card_atr 3b:ff:94:00:ff:80:b1:fe:45:1f:03:00:68:d2:76:00:00:28:ff:05:1e:31:80:00:90:00:23 {
		force_protocol = t0;
	}
	card_atr 3b:ff:11:00:ff:80:b1:fe:45:1f:03:00:68:d2:76:00:00:28:ff:05:1e:31:80:00:90:00:a6 {
		force_protocol = t0;
	}

	# Below are the framework specific configuration blocks.

	# PKCS #15
	framework pkcs15 {
		# Whether to use the cache files in the user's
		# home directory.
		#
		# At the moment you have to 'teach' the card
		# to the system by running command: pkcs15-tool -L
		#
		# WARNING: Caching shouldn't be used in setuid root
		# applications.
		# Default: false
		# use_file_caching = true;
		#
		# Use PIN caching?
		# Default: true
		# use_pin_caching = false;
		#
		# How many times to use a PIN from cache before re-authenticating it?
		# Default: 10
		# pin_cache_counter = 3;
		#
		# Enable pkcs15 emulation.
		# Default: yes
		# enable_pkcs15_emulation = no;
		#
		# Prefer pkcs15 emulation code before
		# the normal pkcs15 processing.
		# Some cards (like esteid and pteid) work in emu-only mode,
		# and do not depend on this option.
		#
		# Default: no
		 try_emulation_first = yes;
		
		# Enable builtin emulators.
		# Default: yes
		# enable_builtin_emulation = no;
		#
		# List of the builtin pkcs15 emulators to test
		# Default: esteid, openpgp, tcos, starcert, itacns, infocamere, postecert, actalis, atrust-acos, gemsafeGPK, gemsafeV1, tccardos, PIV-II;
		# builtin_emulators = openpgp;

		# additional settings per driver
		#
		# For pkcs15 emulators loaded from an external shared
		# library/DLL, you need to specify the path name of the module
		# and customize the card_atr example above correctly.
		#
		# emulate custom {
			# The location of the driver library
			# module = /usr/lib/opensc/drivers/p15emu_custom.so;
		# }
		
		# workaround: fix keyReference and pinReference values
		# OpenSC 0.11.4 and older have a bug: integers were not
		# properly encoded in asn.1 structures. So far only
		# starcos cards were found to have a problem with this,
		# and only these two values were found to be filled with
		# the wrong value.
      		#
		# Fortunatly those values (if present) need to be positive.
		# Thus we can check if these are available and negative,
		# and if so fix them by adding 256 to get the correct value.
		#
		# To be on the safe side, this workaround/fix can be turned
		# off.
		#
		# Default: yes
		# enable_fix_asn1_integers = no;
	}
}

# Parameters for the OpenSC PKCS11 module
app opensc-pkcs11 {
	pkcs11 {
		# Should the module support hotplug of readers as per PKCS#11 v2.20?
		# This affects slot changes and PC/SC PnP, as v2.11 applications
		# are not allowed to change the length of the slot list.
		# Default: true
		# plug_and_play = false;

		# Maximum Number of virtual slots.
		# If there are more slots than defined here,
		# the remaining slots will be hidden from PKCS#11.
		# Default: 16
		# max_virtual_slots = 32;

		# Maximum number of slots per smart card.
		# If the card has fewer keys than defined here,
		# the remaining number of slots will be empty.
		# Default: 4
		# slots_per_card = 2;

		# (max_virtual_slots/slots_per_card) limits the number of readers
		# that can be used on the system. Default is then 16/4=4 readers.

		# Normally, the pkcs11 module will create
		# the full number of slots defined above by
		# num_slots. If there are fewer pins/keys on
		# the card, the remaining keys will be empty
		# (and you will be able to create new objects
		# within them).
		# Default: true
		# hide_empty_tokens = false;

 		# By default, the OpenSC PKCS#11 module will not lock your card
		# once you authenticate to the card via C_Login.
		#
 		# Thus the other users or other applications is not prevented
 		# from connecting to the card and perform crypto operations
 		# (which may be possible because you have already authenticated
 		# with the card). This setting is not very secure.
		#
		# Also, if your card is not locked, you can enconter problems 
		# due to limitation of the OpenSC framework, that still is not 
		# thoroughly tested in the multi threads environment.
 		#
		# Your settings will be more secure if you choose to lock your 
		# card. Nevertheless this behavior is a known violation of PKCS#11 
		# specification. Now once one application has started using your 
		# card with C_Login, no other application can use it, until 
		# the first is done and calls C_Logout or C_Finalize. In the case 
		# of many PKCS#11 application this does not happen until you exit 
		# the application.  
 		# Thus it is impossible to use several smart card aware applications 
		# at the same time, e.g. you cannot run both Firefox and Thunderbird at 
		# the same time, if both are configured to use your smart card.
 		#
		# Default: false
		 lock_login = false;

		# User PIN unblock style
		#    none:  PIN unblock is not possible with PKCS#11 API;
		#    set_pin_in_unlogged_session:  C_SetPIN() in unlogged session:
		#       PUK is passed as the 'OldPin' argument of the C_SetPIN() call.
		#    set_pin_in_specific_context:  C_SetPIN() in the CKU_SPECIFIC_CONTEXT logged session:
		#       PUK is passed as the 'OldPin' argument of the C_SetPIN() call.
		#    init_pin_in_so_session:  C_InitPIN() in CKU_SO logged session:
		#       User PIN 'UNBLOCK' is protected by SOPIN. (PUK == SOPIN).
		#       # Actually this style works only for the PKCS15 contents without SOPIN.
		#       # For those with SOPIN, this mode will be usefull for the cards without
		#       #   modes 00 and 01 of ISO command 'RESET RETRY COUNTER'. --vt
		#
		# Default: none
		# user_pin_unblock_style = set_pin_in_unlogged_session;

		# Create slot for unblocking PIN with PUK
		# This way PKCS#11 API can be used to login with PUK and
		# change a PIN.
		# Warning: causes problems with some applications like
		# firefox and thunderbird. Thus turned off by default
		#
		# Default: false
		# create_puk_slot = true;

		# Report as 'zero' the CKA_ID attribute of CA certificate
		# For the unknown reason the middleware of the manufacturer of gemalto (axalto, gemplus) 
		# card reports as '0' the CKA_ID of CA cartificates. 
		# Maybe someone else will need it. (Would be nice to know who and what for -- VTA)
		# 
		# Default: false
		# zero_ckaid_for_ca_certs = true;

		# List of readers to ignore
		# If any of the strings listed below is matched (case sensitive) in a reader name,
		# the reader is ignored by the PKCS#11 module.
		#
		# Default: empty
		# ignored_readers = "CardMan 1021", "SPR 532";
	}
}

# Used by OpenSC.tokend on Mac OS X only.
app tokend {
	# The file to which debug log will be written
	# Default: /tmp/opensc-tokend.log
	#
	# debug_file = /Library/Logs/OpenSC.tokend.log

	framework tokend {
		# Score for OpenSC.tokend
		# The tokend with the lowest score shall be used
		# Default: 50
		#
		# score = 10;
	}
}

app cardmod {
	#allow only cardmodule pcsc reader for minidriver (mandatory)
	# FIXME cardmod pcsc hack is now broken.

	reader_driver cardmod {
		# Enable pinpad if detected (PC/SC v2.0.2 Part 10)
		# Default: true
		# enable_pinpad = false;
	}
}

Kood: Vali kõik

app default {
        debug = 0;
        reader_drivers = pcsc;
        reader_driver ctapi {
        }
        reader_driver pcsc {
        }
        reader_driver openct {
        };
        card_atr 3b:6e:00:ff:45:73:74:45:49:44:20:76:65:72:20:31:2e:30 {
                force_protocol = t0;
        }
        card_atr 3b:fe:94:00:ff:80:b1:fa:45:1f:03:45:73:74:45:49:44:20:76:65:72:20:31:2e:30:43 {
                force_protocol = t0;
        }
        card_atr 3b:ff:94:00:ff:80:b1:fe:45:1f:03:00:68:d2:76:00:00:28:ff:05:1e:31:80:00:90:00:23 {
                force_protocol = t0;
        }
        card_atr 3b:ff:11:00:ff:80:b1:fe:45:1f:03:00:68:d2:76:00:00:28:ff:05:1e:31:80:00:90:00:a6 {
                force_protocol = t0;
        }
        framework pkcs15 {
                try_emulation_first = yes;
        }
}
app opensc-pkcs11 {
        pkcs11 {
                lock_login = false;
        }
}
app tokend {
        framework tokend {
                score = 10;
        }
}