Pingviini veeb

Kood: Vali kõik

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
06:04.2 SD Host controller: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
06:04.4 FLASH memory: ENE Technology

Kood: Vali kõik

[   32.455309] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   32.455531] hpet clockevent registered
[   32.535415] Calibrating delay using timer specific routine.. 3328.87 BogoMIPS (lpj=6657748)
[   32.535541] Security Framework initialized
[   32.535598] SELinux:  Disabled at boot.
[   32.535663] AppArmor: AppArmor initialized
[   32.535716] Failure registering capabilities with primary security module.
[   32.535780] Mount-cache hash table entries: 512
[   32.535969] Initializing cgroup subsys ns
[   32.536024] Initializing cgroup subsys cpuacct
[   32.536086] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[   32.536094] monitor/mwait feature present.
[   32.536145] using mwait in idle threads.
[   32.536200] CPU: L1 I cache: 32K, L1 D cache: 32K
[   32.536284] CPU: L2 cache: 2048K
[   32.536335] CPU: Physical Processor ID: 0
[   32.536386] CPU: Processor Core ID: 0
[   32.536437] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e39d 00000000 00000001 00000000
[   32.536446] Compat vDSO mapped to ffffe000.
[   32.536512] Checking 'hlt' instruction... OK.
[   32.551835] SMP alternatives: switching to UP code
[   32.553570] Early unpacking initramfs... done
[   32.898906] ACPI: Core revision 20070126
[   32.899000] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   32.928904] CPU0: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
[   32.929037] SMP alternatives: switching to SMP code
[   32.929811] Booting processor 1/1 eip 3000
[   32.940065] Initializing CPU#1
[   33.018668] Calibrating delay using timer specific routine.. 3325.04 BogoMIPS (lpj=6650090)
[   33.018675] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[   33.018680] monitor/mwait feature present.
[   33.018683] CPU: L1 I cache: 32K, L1 D cache: 32K
[   33.018685] CPU: L2 cache: 2048K
[   33.018687] CPU: Physical Processor ID: 0
[   33.018689] CPU: Processor Core ID: 1
[   33.018690] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e39d 00000000 00000001 00000000
[   33.019277] CPU1: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
[   33.019782] Total of 2 processors activated (6653.91 BogoMIPS).
[   33.020030] ENABLING IO-APIC IRQs
[   33.020270] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   33.166558] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   33.186632] Brought up 2 CPUs
[   33.186704] CPU0 attaching sched-domain:
[   33.186706]  domain 0: span 03
[   33.186708]   groups: 01 02
[   33.186711] CPU1 attaching sched-domain:
[   33.186713]  domain 0: span 03
[   33.186715]   groups: 02 01
[   33.186943] net_namespace: 64 bytes
[   33.187003] Booting paravirtualized kernel on bare hardware
[   33.187529] Time:  9:28:55  Date: 07/24/08
[   33.187606] NET: Registered protocol family 16
[   33.187853] EISA bus registered
[   33.187906] ACPI: bus type pci registered
[   33.188152] PCI: BIOS BUG #81[49435000] found
[   33.188204] PCI: Using configuration type 1
[   33.188271] Setting up standard PCI resources
[   33.192823] ACPI: EC: Look up EC in DSDT
[   33.194896] ACPI: BIOS _OSI(Linux) query ignored via DMI
[   33.194951] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[   33.195300] ACPI: Interpreter enabled
[   33.195353] ACPI: (supports S0 S3 S4 S5)
[   33.195541] ACPI: Using IOAPIC for interrupt routing
[   33.199950] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[   33.200008] ACPI: EC: driver started in poll mode
[   33.200102] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   33.200999] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[   33.201058] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[   33.202344] PCI: Transparent bridge - 0000:00:1e.0
[   33.202492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   33.202784] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[   33.202910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[   33.203033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[   33.203164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[   33.210237] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[   33.210767] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[   33.211290] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[   33.211855] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[   33.212418] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[   33.213013] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[   33.213610] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[   33.214130] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[   33.214764] Linux Plug and Play Support v0.97 (c) Adam Belay
[   33.214848] pnp: PnP ACPI init
[   33.214903] ACPI: bus type pnp registered
[   33.216669] pnp: PnP ACPI: found 10 devices
[   33.216722] ACPI: ACPI bus type pnp unregistered
[   33.216775] PnPBIOS: Disabled by ACPI PNP
[   33.217053] PCI: Using ACPI for IRQ routing
[   33.217106] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   33.217180] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.3
[   33.217237] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.3
[   33.234599] NET: Registered protocol family 8
[   33.234651] NET: Registered protocol family 20
[   33.234737] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   33.234917] hpet0: 3 64-bit timers, 14318180 Hz
[   33.236004] AppArmor: AppArmor Filesystem Enabled
[   33.238338] Time: tsc clocksource has been installed.
[   33.238403] Switched to high resolution mode on CPU 0
[   33.238547] Switched to high resolution mode on CPU 1
[   33.262304] system 00:01: ioport range 0xfe00-0xfe7f has been reserved
[   33.262361] system 00:01: ioport range 0xfe80-0xfeff has been reserved
[   33.263202] system 00:01: ioport range 0xff00-0xff7f has been reserved
[   33.263260] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[   33.263331] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[   33.263402] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[   33.263473] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[   33.263543] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[   33.263614] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[   33.263685] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
[   33.263756] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[   33.263831] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[   33.263906] system 00:06: ioport range 0x800-0x80f has been reserved
[   33.263963] system 00:06: ioport range 0x1000-0x107f has been reserved
[   33.264019] system 00:06: ioport range 0x1180-0x11bf has been reserved
[   33.294462] PCI: Bridge: 0000:00:1c.0
[   33.294513]   IO window: disabled.
[   33.294567]   MEM window: d0100000-d01fffff
[   33.294622]   PREFETCH window: disabled.
[   33.294678] PCI: Bridge: 0000:00:1c.2
[   33.294731]   IO window: 2000-2fff
[   33.294785]   MEM window: d0200000-d02fffff
[   33.294841]   PREFETCH window: 68000000-680fffff
[   33.294898] PCI: Bridge: 0000:00:1c.3
[   33.294948]   IO window: disabled.
[   33.295002]   MEM window: disabled.
[   33.295055]   PREFETCH window: disabled.
[   33.295118] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[   33.295171]   IO window: 00001400-000014ff
[   33.295226]   IO window: 00001c00-00001cff
[   33.295282]   PREFETCH window: 6c000000-6fffffff
[   33.295338]   MEM window: 70000000-73ffffff
[   33.295393] PCI: Bridge: 0000:00:1e.0
[   33.295444]   IO window: disabled.
[   33.295498]   MEM window: d0000000-d00fffff
[   33.295552]   PREFETCH window: disabled.
[   33.295633] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[   33.295740] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   33.295764] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
[   33.295869] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   33.295893] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
[   33.295999] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   33.296011] PCI: Enabling device 0000:00:1e.0 (0004 -> 0006)
[   33.296070] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   33.296088] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 19
[   33.296199] NET: Registered protocol family 2
[   33.338214] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   33.338490] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   33.339014] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   33.339317] TCP: Hash tables configured (established 131072 bind 65536)
[   33.339374] TCP reno registered
[   33.350265] checking if image is initramfs... it is
[   34.029144] Freeing initrd memory: 7330k freed
[   34.029403] Simple Boot Flag at 0x36 set to 0x1
[   34.030112] audit: initializing netlink socket (disabled)
[   34.030189] audit(1216891735.429:1): initialized
[   34.030451] highmem bounce pool size: 64 pages
[   34.032528] VFS: Disk quotas dquot_6.5.1
[   34.032653] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   34.032845] io scheduler noop registered
[   34.032897] io scheduler anticipatory registered
[   34.032949] io scheduler deadline registered
[   34.033011] io scheduler cfq registered (default)
[   34.033075] Boot video device is 0000:00:02.0
[   34.033290] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   34.033350] assign_interrupt_mode Found MSI capability
[   34.033453] Allocate Port Service[0000:00:1c.0:pcie00]
[   34.033488] Allocate Port Service[0000:00:1c.0:pcie02]
[   34.033590] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   34.033650] assign_interrupt_mode Found MSI capability
[   34.033749] Allocate Port Service[0000:00:1c.2:pcie00]
[   34.033781] Allocate Port Service[0000:00:1c.2:pcie02]
[   34.033882] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   34.033941] assign_interrupt_mode Found MSI capability
[   34.034040] Allocate Port Service[0000:00:1c.3:pcie00]
[   34.034074] Allocate Port Service[0000:00:1c.3:pcie02]
[   34.034341] isapnp: Scanning for PnP cards...
[   34.388273] isapnp: No Plug & Play device found
[   34.413981] Real Time Clock Driver v1.12ac
[   34.414261] hpet_resources: 0xfed00000 is busy
[   34.414287] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   34.415567] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   34.415707] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   34.415872] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   34.437472] i8042.c: Detected active multiplexing controller, rev 1.1.
[   34.454264] serio: i8042 KBD port at 0x60,0x64 irq 1
[   34.454321] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   34.454378] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   34.454433] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   34.454487] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   34.469550] mice: PS/2 mouse device common for all mice
[   34.469717] EISA: Probing bus 0 at eisa.0
[   34.469773] Cannot allocate resource for EISA slot 1
[   34.469827] Cannot allocate resource for EISA slot 2
[   34.469905] EISA: Detected 0 cards.
[   34.469957] cpuidle: using governor ladder
[   34.470008] cpuidle: using governor menu
[   34.470141] NET: Registered protocol family 1
[   34.470220] Using IPI No-Shortcut mode
[   34.470300] registered taskstats version 1
[   34.470461]   Magic number: 0:688:475
[   34.470590] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   34.470644] EDD information not available.
[   34.470881] Freeing unused kernel memory: 368k freed
[   34.483208] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   35.701000] fuse init (API version 7.9)
[   35.722314] ACPI: SSDT 5F684CB7, 019C (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
[   35.722529] ACPI: SSDT 5F684AD4, 015E (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
[   35.723210] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   35.723438] ACPI: SSDT 5F684E53, 007D (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
[   35.723635] ACPI: SSDT 5F684C32, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
[   35.724127] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[   36.111484] usbcore: registered new interface driver usbfs
[   36.111510] usbcore: registered new interface driver hub
[   36.111933] usbcore: registered new device driver usb
[   36.113297] USB Universal Host Controller Interface driver v3.0
[   36.113351] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[   36.113364] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   36.113368] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   36.113607] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   36.113641] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820
[   36.113778] usb usb1: configuration #1 chosen from 1 choice
[   36.113803] hub 1-0:1.0: USB hub found
[   36.113808] hub 1-0:1.0: 2 ports detected
[   36.214997] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
[   36.215010] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   36.215015] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   36.215039] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   36.215073] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001840
[   36.215201] usb usb2: configuration #1 chosen from 1 choice
[   36.215226] hub 2-0:1.0: USB hub found
[   36.215232] hub 2-0:1.0: 2 ports detected
[   36.229157] SCSI subsystem initialized
[   36.264852] libata version 3.00 loaded.
[   36.318849] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
[   36.318863] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   36.318867] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   36.318891] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   36.318925] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00001860
[   36.319042] usb usb3: configuration #1 chosen from 1 choice
[   36.319068] hub 3-0:1.0: USB hub found
[   36.319073] hub 3-0:1.0: 2 ports detected
[   36.422672] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 19
[   36.422685] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   36.422690] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   36.422713] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   36.422746] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[   36.422865] usb usb4: configuration #1 chosen from 1 choice
[   36.422889] hub 4-0:1.0: USB hub found
[   36.422894] hub 4-0:1.0: 2 ports detected
[   36.454531] usb 1-1: new full speed USB device using uhci_hcd and address 2
[   36.526628] r8169 Gigabit Ethernet driver 2.2LK loaded
[   36.526663] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 17
[   36.526685] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   36.527037] eth0: RTL8168b/8111b at 0xf8850000, 00:16:d4:1b:f7:58, XID 38000000 IRQ 220
[   36.528255] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[   36.528266] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   36.528270] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   36.528299] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   36.532219] ehci_hcd 0000:00:1d.7: debug port 1
[   36.532226] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   36.532233] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd0644000
[   36.582337] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   36.582459] usb usb5: configuration #1 chosen from 1 choice
[   36.582485] hub 5-0:1.0: USB hub found
[   36.582491] hub 5-0:1.0: 8 ports detected
[   36.686397] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 18
[   36.686439] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   36.686453] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[   36.690885] ata_piix 0000:00:1f.1: version 2.12
[   36.690900] ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 18
[   36.690930] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   36.691004] scsi0 : ata_piix
[   36.691051] scsi1 : ata_piix
[   36.691591] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[   36.691594] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[   36.976744] usb 1-1: device not accepting address 2, error -71
[   37.017376] ata1.00: ATA-7: SAMSUNG HM080IC, YK100-13, max UDMA/100
[   37.017381] ata1.00: 156301488 sectors, multi 16: LBA48 
[   37.017434] ata1.01: ATAPI: Slimtype DVDRW SSM-8515S, GSL1, max UDMA/33
[   37.025292] ata1.00: configured for UDMA/100
[   37.096561] Clocksource tsc unstable (delta = -18523166131 ns)
[   37.100626] Time: hpet clocksource has been installed.
[   37.107726] ata1.01: configured for UDMA/33
[   37.107811] ata2: port disabled. ignoring.
[   37.108008] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM080IC  YK10 PQ: 0 ANSI: 5
[   37.109660] scsi 0:0:1:0: CD-ROM            Slimtype DVDRW SSM-8515S  GSL1 PQ: 0 ANSI: 5
[   37.117030] Driver 'sd' needs updating - please use bus_type methods
[   37.117109] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   37.117122] sd 0:0:0:0: [sda] Write Protect is off
[   37.117124] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   37.117142] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   37.117197] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   37.117208] sd 0:0:0:0: [sda] Write Protect is off
[   37.117210] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   37.117227] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   37.117231]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   37.139174]  sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[   37.191036] sd 0:0:0:0: [sda] Attached SCSI disk
[   37.196538] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   37.196560] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   37.207263] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   37.207267] Uniform CD-ROM driver Revision: 3.20
[   37.207323] sr 0:0:1:0: Attached scsi CD-ROM sr0
[   37.718935] ReiserFS: sda1: found reiserfs format "3.6" with standard journal
[   37.718948] ReiserFS: sda1: using ordered data mode
[   37.734334] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   37.734631] ReiserFS: sda1: checking transaction log (sda1)
[   37.749405] usb 1-1: new full speed USB device using uhci_hcd and address 4
[   37.777517] ReiserFS: sda1: Using r5 hash to sort names
[   37.956871] usb 1-1: configuration #1 chosen from 1 choice
[   38.199692] usb 2-1: new full speed USB device using uhci_hcd and address 2
[   38.389781] usb 2-1: configuration #1 chosen from 1 choice
[   48.211348] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   48.356172] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   48.427607] Linux agpgart interface v0.102
[   48.550132] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   48.629928] agpgart: Detected an Intel 945GM Chipset.
[   48.630991] agpgart: Detected 7932K stolen memory.
[   48.646104] agpgart: AGP aperture is 256M @ 0xc0000000
[   48.745596] input: Power Button (FF) as /devices/virtual/input/input3
[   48.761644] ACPI: Power Button (FF) [PWRF]
[   48.761708] input: Lid Switch as /devices/virtual/input/input4
[   48.761769] ACPI: Lid Switch [LID0]
[   48.761821] input: Power Button (CM) as /devices/virtual/input/input5
[   48.785605] ACPI: Power Button (CM) [PWRB]
[   48.852821] iTCO_vendor_support: vendor-support=0
[   48.877632] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   48.997351] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
[   49.017253] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   49.017591] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
[   49.049194] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   49.054846] ACPI: AC Adapter [ACAD] (on-line)
[   49.288768] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   49.427632] ACPI: Battery Slot [BAT1] (battery present)
[   49.672602] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input8
[   49.701341] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   49.701380] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   50.238459] sdhci: Secure Digital Host Controller Interface driver
[   50.238464] sdhci: Copyright(c) Pierre Ossman
[   50.238506] sdhci: SDHCI controller found at 0000:06:04.2 [1524:0550] (rev 1)
[   50.238527] PCI: Enabling device 0000:06:04.2 (0000 -> 0002)
[   50.238533] ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 17 (level, low) -> IRQ 16
[   50.238592] mmc0: SDHCI at 0xd0001400 irq 16 PIO
[   50.238601] sdhci: SDHCI controller found at 0000:06:04.4 [1524:0551] (rev 1)
[   50.238618] PCI: Enabling device 0000:06:04.4 (0000 -> 0002)
[   50.238623] ACPI: PCI Interrupt 0000:06:04.4[B] -> GSI 17 (level, low) -> IRQ 16
[   50.238659] mmc1: SDHCI at 0xd0001100 irq 16 PIO
[   50.439716] r8169: eth0: link up
[   50.439728] r8169: eth0: link up
[   50.445717] Yenta: CardBus bridge found at 0000:06:04.0 [14c0:0020]
[   50.445744] Yenta: Using CSCINT to route CSC interrupts to PCI
[   50.445746] Yenta: Routing CardBus interrupts to PCI
[   50.445753] Yenta TI: socket 0000:06:04.0, mfunc 0x88501212, devctl 0x44
[   50.582853] intel_rng: FWH not detected
[   50.626067] Bluetooth: Core ver 2.11
[   50.641566] NET: Registered protocol family 31
[   50.641570] Bluetooth: HCI device and connection manager initialized
[   50.641574] Bluetooth: HCI socket layer initialized
[   50.642390] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26k
[   50.642394] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[   50.675445] Yenta: ISA IRQ mask 0x0cf8, PCI irq 19
[   50.675450] Socket status: 30000006
[   50.675453] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[   50.675458] pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd00fffff
[   50.675534] Bluetooth: HCI USB driver ver 2.9
[   50.676842] usbcore: registered new interface driver hci_usb
[   50.686995] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 19
[   50.687013] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   50.687036] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[   50.758794] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[   50.760050] phy0: Selected rate control algorithm 'iwl-3945-rs'
[   50.931019] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[   50.931049] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   50.965001] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   51.163032] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[   51.313978] NET: Registered protocol family 10
[   51.314236] lo: Disabled Privacy Extensions
[   51.421625] cs: IO port probe 0x100-0x3af: clean.
[   51.423670] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   51.424528] cs: IO port probe 0x820-0x8ff: clean.
[   51.425252] cs: IO port probe 0xc00-0xcf7: clean.
[   51.426154] cs: IO port probe 0xa00-0xaff: clean.
[   51.612334] lp: driver loaded but no devices found
[   51.794928] Adding 2931820k swap on /dev/sda7.  Priority:-1 extents:1 across:2931820k
[   56.293168] eth0: no IPv6 routers present
[   56.827382] ReiserFS: sda2: found reiserfs format "3.6" with standard journal
[   56.827392] ReiserFS: sda2: using ordered data mode
[   56.834632] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   56.834887] ReiserFS: sda2: checking transaction log (sda2)
[   56.867867] ReiserFS: sda2: Using r5 hash to sort names
[   57.403588] ip_tables: (C) 2000-2006 Netfilter Core Team
[   57.814491] No dock devices found.
[   59.573821] apm: BIOS not found.
[   59.690066] ppdev: user-space parallel port driver
[   60.018104] audit(1216891790.246:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5363 profile="/usr/sbin/cupsd" namespace="default"
[   63.313767] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 19
[   63.313907] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100002, writing 100006)
[   63.502518] Bluetooth: L2CAP ver 2.9
[   63.502524] Bluetooth: L2CAP socket layer initialized
[   63.513803] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   63.621973] Bluetooth: RFCOMM socket layer initialized
[   63.621991] Bluetooth: RFCOMM TTY layer initialized
[   63.621994] Bluetooth: RFCOMM ver 1.8
[   66.433554] [drm] Initialized drm 1.1.0 20060810
[   66.439622] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 19
[   66.439631] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   66.439687] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   76.031805] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   76.032562] input: Bluetooth Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/hci0/acl0012A1608198/input/input9
[   87.977260] CPU0 attaching NULL sched-domain.
[   87.977269] CPU1 attaching NULL sched-domain.
[   88.005053] CPU0 attaching sched-domain:
[   88.005062]  domain 0: span 03
[   88.005065]   groups: 01 02
[   88.005071] CPU1 attaching sched-domain:
[   88.005074]  domain 0: span 03
[   88.005076]   groups: 02 01