Pingviini veeb

Üritasin nicotine peale installida, aga siis tahtis python tõmbasin siis oli pythonil vaja jne. Aga lõpuks jõudsin tagasi pythoni juurde ja pythonit ei lase kh installida, ütleb et on puudu. Et kuidas siis toimida?

Veel üks probleem. Hakkasin installima kmldonkeyt ja tuli selline error.
checking for KDE... configure: error:
in the prefix, you've chosen, are no KDE headers installed. This will fail.
So, check this please and use another prefix!
[karl@localhost kmldonkey-0.10.1]$ make
make: *** No targets specified and no makefile found. Stop.
[karl@localhost kmldonkey-0.10.1]$ su -c "make install"
Password:
make: *** No rule to make target `install'. Stop.

Su esimesest "asjast" ei saanud ma küll mitte mõhkugi aru.
Teise puhul aga tee enne ./configure vigadeta lõpuni, siis alles make.
Miks tuli configure:error, seda ma ei tea. sest su veateade on Liiga lühike.
Näita 5-6 rida ülevaltpoolt rohkem seda viga.

nicotine vajab installimiseks pythinit, python vajab installimseks midagi kuni selleni, et mingi midagi vajab pyhthonit.
Lahendus peaks olema nende kõikid korraga installeerimine. Mandrivas ma ei tea, kuidas see käib.
Teise probleemi lahendus peaks olema KDEi installeerimine.

checking size of char *... 4
checking for dlopen in -ldl... (cached) yes
checking for shl_unload in -ldld... no
checking for size_t... yes
checking size of size_t... 4
checking for unsigned long... yes
checking size of unsigned long... 4
checking sizeof size_t == sizeof unsigned long... yes
checking for PIE support... yes
checking if enabling -pie/fpie support... yes
checking crt_externs.h usability... no
checking crt_externs.h presence... no
checking for crt_externs.h... no
checking for _NSGetEnviron... no
checking for vsnprintf... yes
checking for snprintf... yes
checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include
checking for IceConnectionNumber in -lICE... yes
checking for libXext... yes
checking for pthread_create in -lpthread... yes
checking for extra includes... no
checking for extra libs... no
checking for libz... -lz
checking for libpng... -lpng -lz -lm
checking for libjpeg6b... no
checking for libjpeg... -ljpeg
checking for perl... /usr/bin/perl
checking for Qt... libraries /usr/lib/qt3//lib, headers /usr/lib/qt3//include using -mt
checking for moc... /usr/lib/qt3//bin/moc
checking for uic... /usr/lib/qt3//bin/uic
checking whether uic supports -L ... yes
checking whether uic supports -nounload ... yes
checking if Qt needs -ljpeg... no
checking for rpath... yes
checking for KDE... configure: error:
in the prefix, you've chosen, are no KDE headers installed. This will fail.
So, check this please and use another prefix!
[karl@localhost kmldonkey-0.10.1]$

paigalda kdelibs paketid.

Aga ütleb:
[karl@localhost ~]$ urpmi kdelibs-devel
bash: urpmi: command not found
[karl@localhost ~]$

See käsk tuleb root kasutajana käivitada.

[karl@localhost ~]$ sudo urpmi kdelibs-devel
sendmail: warning: My hostname localhost is not a fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf
postdrop: warning: My hostname localhost is not a fully qualified name - set myhostname or mydomain in /etc/postfix/main.cf
karl is not in the sudoers file. This incident will be reported.
[karl@localhost ~]$

Mine "su" käsku kasutades root kasutaja alla ja siis käivita see käsk. Sul on sudo seadistamata.

Good - your configure finished. Start make now

[karl@localhost kmldonkey-0.10.1]$ make
make all-recursive
make[1]: Entering directory `/home/karl/kmldonkey-0.10.1'
Making all in src
make[2]: Entering directory `/home/karl/kmldonkey-0.10.1/src'
Making all in libkmldonkey
make[3]: Entering directory `/home/karl/kmldonkey-0.10.1/src/libkmldonkey'
if /bin/sh ../../libtool --silent --mode=compile --tag=CXX g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I/usr/lib/qt3//include -I/usr/X11R6/include -DQT_THREAD_SUPPORT -D_REENTRANT -Wnon-virtual-dtor -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -Wno-non-virtual-dtor -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION -MT fileinfo.lo -MD -MP -MF ".deps/fileinfo.Tpo" -c -o fileinfo.lo fileinfo.cpp; \
then mv -f ".deps/fileinfo.Tpo" ".deps/fileinfo.Plo"; else rm -f ".deps/fileinfo.Tpo"; exit 1; fi
libtool: invalid tag name: --tCXX
make[3]: *** [fileinfo.lo] Error 1
make[3]: Leaving directory `/home/karl/kmldonkey-0.10.1/src/libkmldonkey'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/karl/kmldonkey-0.10.1/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/karl/kmldonkey-0.10.1'
make: *** [all] Error 2
[karl@localhost kmldonkey-0.10.1]$ su -c "make install"
Password:
Making install in src
make[1]: Entering directory `/home/karl/kmldonkey-0.10.1/src'
Making install in libkmldonkey
make[2]: Entering directory `/home/karl/kmldonkey-0.10.1/src/libkmldonkey'
if /bin/sh ../../libtool --silent --mode=compile --tag=CXX g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I/usr/lib/qt3//include -I/usr/X11R6/include -DQT_THREAD_SUPPORT -D_REENTRANT -Wnon-virtual-dtor -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -Wno-non-virtual-dtor -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION -MT fileinfo.lo -MD -MP -MF ".deps/fileinfo.Tpo" -c -o fileinfo.lo fileinfo.cpp; \
then mv -f ".deps/fileinfo.Tpo" ".deps/fileinfo.Plo"; else rm -f ".deps/fileinfo.Tpo"; exit 1; fi
libtool: invalid tag name: --tCXX
make[2]: *** [fileinfo.lo] Error 1
make[2]: Leaving directory `/home/karl/kmldonkey-0.10.1/src/libkmldonkey'
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory `/home/karl/kmldonkey-0.10.1/src'
make: *** [install-recursive] Error 1
[karl@localhost kmldonkey-0.10.1]$

Proovi nii.

Tnx Hardi. Aga nüüd on selline probleem et ta tahab minhab mingit patchi nimega mlnet. kas keegi on proovinud seda mandrivas tööle saaada? ja anda täpsed juhised et milline patch jne.. tõmbasin ise kah ühe patchi aga kui seal alguses see menüü kui panen tööle donkey siis valin selle patchi aga ikka ei saa tööle.

Öelge palun mõni p2p progre mis Mandrivas 2005 LE kindlasti tööle läheb. Aiult tõmban RPMi ja lasen peale.

Azureus on Cookeris olemas

Miks sortsust üritad installida kui saab ka urpmi abil mis sõltuvused lahendab?

Ütleb et pakketi ei ole.
Installisin veel limewire kh aga kui panen käsu limewire siis ei juhtu midagi ütleb et command not found.

Sul urpmi allikad seadistamata ilmselt kui ütleb, et pakki pole.Kunagi sai seadistamise tarvis pisike skriptijupp tehtud, toksi root kasutajana konsooli sellised käsud: Kui skript teatab,et kõik tehtud,siis "urpmi kmldonkey ".Ja ühtlasi võid kogu oma süsteemi ära ka updeitida "urpmi --update --auto-select".
Limewire binaar peaks idee järgi asuma /usr/bin kataloomas.Täpsemat infi annab "whereis limewire".