Pingviini veeb

Minul ei tööta - ID-kaarti ei leita või on Teie sertifitseeritud sessioon kasutatud (sulgege veebilehitseja ja avage uuesti)

Mis id kaardi lugeja sul on?
Mis lehel ta niimoodi ütleb ?
Kas sa sisestasid IDkaardi enne Firefoxi käivitamist ?

ID-kaardi lugeja on SCR331
Lehe aadress on https://id.seb.ee/konto/unet3.sh/un3.w
Sisestan enne foxi käivitamist ID-kaardi

See lugeja töötab estobuntuga väga hästi, nii et ma arvan, et asi on selles et eelnevas teemas krahhiprobleemi lahendamiseks tehtud uus FF profiil ei sisalda ID kaardile vajalikku moodulit ega sertifikaate. Kõige kiirem viis selle lahendamiseks oleks kodukataloogis "Vaade" > "Peidetud failide näitamine" sisse lülitada ja kui Firefox kinni on kustutada ära kaust .mozilla
Selle tulemusena laetakse uuesti süsteemi vaikimisi seaded, millega ID-kaart töötab.
NB! see kaotab kõik Firefoxi seaded. Järjehoidjad annab tegelikult enne eksportida ja pärast importida, aga kui neid pole, teeks mina nii nagu eelpool kirjeldatud.

tegin nii ja tulemus sama

Kaardi pin võib olla blokeerunud ?

Ei ole - kontrollisin

Sisesta id kaart lugejasse, seejärel kirjuta konsooli allolevad käsud ja anna väljundid, eri ridadel eri käsud:

opensc-tool --list-readers

pkcs15-tool --list-certificates

Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Readers known about:
Nr. Driver Name
0 openct OpenCT reader (detached)
1 openct OpenCT reader (detached)
2 openct OpenCT reader (detached)
3 openct OpenCT reader (detached)
4 openct OpenCT reader (detached)pkcs

pkcs15-tool: option `--list-' is ambiguous
Usage: pkcs15-tool [OPTIONS]
Options:
--learn-card, -L Stores card info to cache
--read-certificate, -r <arg> Reads certificate with ID <arg>
--list-certificates, -c Lists certificates
--read-data-object, -R <arg> Reads data object with applicationName or OID <arg>
--list-data-objects, -C Lists data objects
--list-pins Lists PIN codes
--dump, -D Dump card objects
--unblock-pin, -u Unblock PIN code
--change-pin Changes the PIN code
--list-keys, -k Lists private keys
--list-public-keys Lists public keys
--read-public-key <arg> Reads public key with ID <arg>
--read-ssh-key <arg> Reads public key with ID <arg>, outputs ssh format
--reader <arg> Uses reader number <arg>
--pin <arg> Specify PIN
--new-pin <arg> Specify New PIN (when changing or unblocking)
--puk <arg> Specify Unblock PIN
--output, -o <arg> Outputs to file <arg>
--no-cache Disable card caching
--auth-id, -a <arg> The auth ID of the PIN to use
--wait, -w Wait for card insertion
--verbose, -v Verbose operation. Use several times to enable debug output.

Tee arvutile taaskäivitus, aseta lugeja teise porti ja korda esimest käsku.

lovikutsikas@lovikutsikas-desktop:~$ opensc-tool --list-readers
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Readers known about:
Nr. Driver Name
0 openct OpenCT reader (detached)
1 openct OpenCT reader (detached)
2 openct OpenCT reader (detached)
3 openct OpenCT reader (detached)
4 openct OpenCT reader (detached)
lovikutsikas@lovikutsikas-desktop:~$

kosooli ja väljund siia:

lsusb

Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 04e6:e001 SCM Microsystems, Inc. SCR331 SmartCard Reader
Bus 001 Device 001: ID 0000:0000

Sellise veateate korral peab määrama draiveriks pcsc /etc/opensc/opensc.conf failist. Vaikimisi on openct

Liikusin sinna kausta ja avasin selle faili, aga ei saa aru kuidas ma saan määrata draiveriks pcsc

Kuskil 50. rea paiku on selline rida:
reader_drivers = openct, pcsc, ctapi;
Aga peaks olema:
reader_drivers = pcsc, ctapi;
Lihtsalt kommenteeri algne rida välja, lisades rea ette # märk ja lisa selle alla
reader_drivers = pcsc, ctapi;

Kogu toimingu pead tegema administraatori õigustes ehk kasutama sudo käsku. Nt käivita terminalist sudo kate /etc/opensc/opensc.conf

lovikutsikas@lovikutsikas-desktop:~$ sudo kate
[sudo] password for lovikutsikas:
Error: "/var/tmp/kdecache-lovikutsikas" is owned by uid 1000 instead of uid 0.
Error: "/tmp/ksocket-lovikutsikas" is owned by uid 1000 instead of uid 0.
Error: "/var/tmp/kdecache-lovikutsikas" is owned by uid 1000 instead of uid 0.
Error: "/tmp/ksocket-lovikutsikas" is owned by uid 1000 instead of uid 0.
Error: "/tmp/kde-lovikutsikas" is owned by uid 1000 instead of uid 0.
Error: "/var/tmp/kdecache-lovikutsikas" is owned by uid 1000 instead of uid 0.
Error: "/var/tmp/kdecache-lovikutsikas" is owned by uid 1000 instead of uid 0.

selline käsk ikka, eks ole:

[sudo] password for lovikutsikas:
Sorry, try again.
[sudo] password for lovikutsikas:
Sorry, try again.
[sudo] password for lovikutsikas:
root@lovikutsikas-desktop:~# sudo kate /etc/opensc/opensc.conf
kate: cannot connect to X server
root@lovikutsikas-desktop:~#

Mida KDE gksudo asemel kasutab? kdesudo
Kui graafiliselt ei saa, siis käivita käsurea tekstitoimeti. Igal distrol peaks kaasas olema nano ja vi. Kuna vi on veidi segadust tekitav alguses, siis
sudo nano /etc/opensc/opensc.conf
Ctrl+O salvestab ja Ctrl+X-ga saad välja.